BLDC Motor t-Rex 3206 digital Ø65 L95

From €376.04 *

Prices incl. VAT plus shipping costs


  • 3206.00-0005-MCC1
  • 1.49 kg
Idle speed up to 1390 1/min Max. Torque up to 9 Nm Rated torque 1.9Nm Rated speed up... more
Product information "BLDC Motor t-Rex 3206 digital Ø65 L95"

  • Idle speed up to 1390 1/min
  • Max. Torque up to 9 Nm
  • Rated torque 1.9Nm
  • Rated speed up to 1185 1/min

Features BLDC motor t-Rex 3206 I-65-86-L36 S2

14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors to detect the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. The design of the motor with a hollow shaft allows the cables to run through the motor or output on both sides..  

Special features BLDC motor 24V l digital l Ø 65mm

  • Designed with focus on max. torque
  • Enormous performance density – 3 times stronger than motors of comparable size
  • High overload resistance
  • Ideally suited as direct drive, or generator for gearless applications

Technical specifications BLDC motor 24V l digital l Ø 65mm

t-Rex 3206 I-65-86 L36 S2 DH 3206.00-0005 /3206.00-0003
Rated voltage 24 VDC 36 VDC 48 VDC
Rated current 5,4 A 5,6 A 5,6 A
Rated torque 1,9 Nm 1,9 Nm 1,9 Nm
Rated speed 535 1/min 865 1/min 1185 1/min
Shaft power (output) 106 W 167 W 232 W
Max. efficiency 84 % 82 % 83 %
Idle speed 702 1/min 1052 1/min 1390 1/min
No-load current 0,45 A 0,43 A 0,43 A
Stall torque 8 Nm 9 Nm 9 Nm
Starting current at idle speed 27 A 28 A 26,5 A
Torque constant 0,308 Nm/A 0,330 Nm/A 0,343 Nm/A
Speed constant 29 rqm/V 29 rqm/V 29 rqm/V
Motor parameters
Terminal resistance (phase to phase) 121 Ohm
Terminal inductance (phase to phase) 0,9 mH
Rotor inertia 104 kg* mm²
Number of poles 14
Interconnection of the motor Stern
Number of coils per phase 2
Interconnection of coils 2 Serie
Direction of rotation bidirektional

Note: Max. ambient temperature = 40 °C, controller-specific
At the nominal point (TU = 20°C), controller-specific

Digital Hall-Sensors
Supply of sensors: Voltage range: 4.5 to 5.5 V DC, Optional: voltage regulator for 5 V, Input current: < 70 mA
Output signals of sensors: Differential output, (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA / Output current: max. 20 mA
Signal structure:The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the
Signal frequency: Is seven times higher than the speed
Related links to "BLDC Motor t-Rex 3206 digital Ø65 L95"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "BLDC Motor t-Rex 3206 digital Ø65 L95"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.