TR12 l 4 variants to choose from l Right and left-hand thread l Outer diameter 24mm l Length 45mm l DIN 103 l BrassProperties cross nut bolt TR 12 brass Our cross nut bolts in sizes TR 12 are characterized by their variety. In addition to right-hand and left-hand threads, you can choose between single-start and multi-start as well as thread dimensions according to standard. Our trapezoidal thread of the spindle nuts according to standard (TR) are certified according to DIN 103.  TR 12x3 (thread pitch 3mm l single thread - left hand thread or right hand thread) TR 12x6 P3 (thread pitch 6mm P3 l double thread - left hand thread or right hand thread) The cross threaded bolts with trapezoidal thread are produced by machining. Within the manufacturing process, excess material is separated in the form of chips. The use of special brass CuZn40Al2 gives the nut the property of high corrosion resistance. 1056.20-01 1056.20-02 1056.20-03 1056.20-04 Thread TR 12x3left-hand threadsingle threadDIN 103d2 TR 12x3right-hand threadsingle threadDIN 103d2 TR 12x6 P3left-hand threaddouble threadDIN 103d2 TR 12x6 P3right-hand threaddouble threadDIN 103d2 Dimensions Outer diameter d1: 24mmLength a: 45mmchamfer outside f1/f2: 1x45°.Tolerance field: 7H Outer diameter d1: 24mmLength a: 45mmchamfer outside f1/f2: 1x45°.Tolerance field: 7H Outer diameter d1: 24mmLength a: 45mmchamfer outside f1/f2: 1x45°.Tolerance field: 7H Outer diameter d1: 24mmLength a: 45mmchamfer outside f1/f2: 1x45°.Tolerance field: 7H Material Brass (CuZn39Pb3) Brass (CuZn39Pb3) Brass (CuZn39Pb3) Brass (CuZn39Pb3) Matching spindle Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Application cross nut bolt round TR 12 brass Our variety of cross threaded bolts with trapezoidal thread can be combined with our trapezoidal threaded spindles in steel and stainless steel. Due to the optimal matching of nut and spindle, the running noise is minimized when converting rotary movements into linear ones. Due to the resulting smooth running, even use in noise-sensitive areas can be guaranteed. Our spindle nut in brass is not the right choice for you? Then it is worth taking a look at our range of trapezoidal threaded nuts: Round nuts with trapezoidal thread in POM and PA6-GF30 Flange nuts with trapezoidal thread in POM and brass Square nuts with trapezoidal thread in POM Back to the overview

Properties flange nut with trapezoidal thread SG 20 POM The flange nuts are special nuts that have a washer on their bottom side. This washer increases the bearing surface of the nut. This makes it possible to fasten the nut even to soft materials made of metal or plastic without damaging them. Our threaded nuts are fixed by means of predetermined holes. Due to the 6-hole fixation of our SG 20 nuts, the component is secured against slipping. The flange nuts with trapezoidal thread have special threads (SG). These are based on DIN 103 and meet requirements outside the standard.  - SG 20x10 P2 (thread pitch 10mm l five-start - right-hand thread) The trapezoidal thread nuts with flange are made of POM (plastic). This material withstands even robust applications due to its high heat resistance. The flange nuts are manufactured using a metal-cutting production process. In this process, excess material is removed in the form of chips. The nut shines with high dimensional accuracy and a high surface quality. Application Flanged nut with trapezoidal thread SG 20 POM The flanged nut increases its bearing surface by means of a washer. This allows it to be fastened to soft materials made of metal and plastic without leaving any damage or losing its hold after a short time. This is additionally supported by securing via the fastening holes. These properties are particularly helpful where a secure hold is required, such as on adapter plates, detent bolts or exhaust mounts. In addition, the flange nuts can also be optimally combined with our spindle tubes. The unit offers a smooth-running drive solution for use in even noise-sensitive areas.  In addition to our flange nuts made of POM, our range also includes other variants made of brass. You will also be inspired by other nut variants:    

TR 10 l 4 variants to choose from l Right and left-hand thread l Outer diameter 20mm l Length 20mm l Brass l DIN 103Properties trapezoidal threaded nut TR 10 brass The trapezoidal threaded nuts are manufactured according to DIN 103 and are therefore standardized. The round nuts in the TR 10 product group are available with both right-hand and left-hand threads. In addition, a choice can be made between single and multiple thread versions:  - TR 10x2 (thread pitch 2mm l single thread - right hand thread). - TR 10x3 (thread pitch 3mm l single thread - left-hand thread or right-hand thread) - TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread) All our round nuts with trapezoidal thread are manufactured by means of a machining process. This process guarantees high dimensional accuracy and surface quality. In addition, the trapezoidal thread nut is characterized by very good corrosion resistance due to the use of special brass (CuZn40Al2).  1602.20-14 1602.20-28 1602.20-15           13008.20-08 Thread          TR 10x2Right-hand threadcatchyDIN 103     TR 10x3Right-hand threadcatchyDIN 103     TR 10x3Left-hand threadcatchyDIN 103      TR 10x6 P3Right-hand threadtwo-courseDIN 103 Dimensions Outer diameter d1: 20mm Length a: 20mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mm     Length a: 20mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mmLength a: 20mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mmLength a: 20mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Material Brass (CuZn40Al2)  Brass (CuZn20Al2) Brass (CuZn40Al2) Brass (CuZn40Al2) Matching spindle  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Application Trapezoidal Threaded Nut TR 10 Brass The round nuts form a unit with the trapezoidal threaded spindles in steel or stainless steel. This drive system is suitable for converting rotary movements into linear ones and can withstand even high loads. The matching between nuts and spindle can minimize running noise and optimize smoothness.

TR10 l 2 versions to choose from l right and left hand thread l single thread l square 20mm l length 27mm l DIN 103 l POMProperties square nuts with trapezoidal thread TR 10 POM Our square nuts with trapezoidal thread TR 10 are manufactured by means of plastic injection molding. This molds the used POM with a high dimensional accuracy to the desired square nut. The nuts are available with both right-hand and left-hand threads: - TR 10x3 (thread pitch 3mm l single thread - right hand thread and left hand thread). The square nuts with trapezoidal thread (movement thread) are manufactured according to DIN 103 and thus standardized.   3001.20-04 3001.20-05 Thread TR 10x3Right-hand threadsingle threadDIN 103     TR 10x3Left-hand threadsingle threadDIN 103     Material POM POM Matching spindle   Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Application square nuts with trapezoidal thread TR 10 POM Our square nuts can be used individually or in combination with our trapezoidal thread spindles. The optimal matching of the two units generates a drive solution with smooth running. In addition to the square nuts in POM, there are other variants to discover: - Round nuts with trapezoidal thread in POM, - brass or PA6-GF30 - Flange nuts with trapezoidal thread in POM or brass

TR 25x5 l single-start l right-hand thread l square 44mm l length 40mm l DIN 103 l POM l plastic injection moulding processProperties square nut with trapezoidal thread TR 24 POM Our square nuts with trapezoidal thread are equipped with a right-hand thread. The trapezoidal thread is a movement thread and is manufactured according to standard (TR). The square nut is manufactured by means of plastic injection molding. This production is characterized by its accuracy even with small components. The material used, POM, also contributes to the characteristics of the square nut. Due to its high heat resistance, it can be used even under robust conditions.        3333.20-06 Thread           TR 24x5Right-hand threadsingle thread DIN 103     Material POM   Matching spindle   Trapezoidal screw spindles in Steel

TR 10x6 P3 l double thread l right-hand thread l outer diameter 32mm l length 14mm l brass l DIN 103Properties flange nut with trapezoidal thread TR 10 brass Our flange nut with trapezoidal thread (TR) is standardized according to the standard and has a nominal thread size of 10mm. In addition, the flange nut is characterized by an enlarged contact surface. This guarantees a secure hold, even on soft materials made of metal and plastic. For fastening the nut, the variant with 4 holes is offered. The offered spindle nut is characterized by its multi-start right-hand thread: - TR 10x6 P3 (thread pitch 6mm P3 l double thread - right-hand thread). The flanged trapezoidal lead screw nuts undergo a machining production process. This removes excess material in the form of chips. By means of this process, high dimensional accuracy and surface quality can be guaranteed. The special brass used (CuZn40Al2), on the other hand, provides the flanged nut with high corrosion resistance.   13012.20-04 Thread           TR 10x6 P3Right-hand threadtwo-courseDIN 103     Dimensions Flange d1: 14mmFlange d2: 32mmFlange d3: 23mm     Length a: 14mmHigh b: 5mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 0,5x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Mounting 4-hole   Material Brass (CuZn40Al2)   Matching spindle   Trapezoidal thread spindle in steeland stainless steel Application Flanged nut with trapezoidal thread TR 10 Brass The spindle nut is used for adapter plates, indexing plungers, exhaust suspensions as well as in combination with our trapezoidal threaded spindles. These are matched to the trapezoidal thread nuts in terms of their thread dimensions. As a result, they form a unit when used as a drive solution.

TR 10 l 2 versions to choose from l Right-hand thread l Outer diameter 32mm l Length 14mm l POM l DIN 103Properties Flange nuts with trapezoidal thread TR 10 and SG 10 POM Our flange nuts with trapezoidal thread are nuts with an enlarged bearing surface for a secure hold under load. Our nuts with a nominal thread size of 10mm have an additional 4-hole fastening option. The flange nuts are available with trapezoidal thread according to standard (TR) or with a special thread (SG). The TR variant complies with DIN 103 and therefore meets the requirements of the standard. Our special threads are adapted to this standard.  - TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread) - SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread)  The flange nuts are produced by means of a machining process. In this process, excess material is removed in the form of chips. In addition to the brass variants in the range, the present nuts are made of POM material. This material is characterized by high heat resistance and dimensional stability.   13012.20-02 13030.20-02 Thread           TR 10x6 P3Right-hand threadtwo-courseDIN 103     SG 10x10 P2Rechtsgewindefive-courseangelehnt an DIN 103 Dimensions Flange d1: 14mmFlange d2: 32mmFlange d3: 23mm     Length a: 14mmHeight b: 5mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 0,5x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 26mmFlange d2: 48mmFlange d3: 38mm     Length a: 20mmHeight b: 7mmChamfer f1: 0,5x45°Chamfer f2: 0,5x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Mounting 4-hole    4-hole   Material POM    POM     Matching spindle   Trapezoidal thread spindle in steel and stainless steel Trapezoidal thread spindle in steel and stainless steel Application Flange nuts with trapezoidal thread TR 10 and SG 10 POM The flange nuts are used in areas where a secure hold is required. Examples are adapter plates, indexing plungers or exhaust suspensions. In addition, the combination with trapezoidal threaded spindles offers the application for a drive solution. Due to the optimally matched elements, smooth running can be guaranteed. These nut variants might also be of interest to you:  More flange nuts with trapezoidal thread in brass.Round nuts with trapezoidal thread in POM, brass and PA6-GF30 Square nuts in POM

TR 10x2 , TR10x3 and TR10x6P3 l Right-hand or left-hand thread l Outer diameter 20mm l Length 20mm l POM l DIN 103 or based on DIN 103Properties round nuts with trapezoidal thread TR 10 and SG 10 POM. Our trapezoidal thread nuts are available with both right-hand and left-hand threads in our online store. In addition to the thread versions according to standard (TR), special threads (SG) are also part of our range. The spindle nuts TR are standardized according to DIN 103 and meet the requirements of the standard. Our special threads are adapted to this standard. The nuts with a nominal thread size of 10mm are available from stock in the following versions: - TR 10x2 (thread pitch 2mm l single thread - right hand thread) - TR 10x3 (thread pitch 3mm l single thread - left hand thread and right hand thread) - TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread) - SG 10x10 P2 (thread pitch 10mm P2 l 5-start - right-hand thread)  The spindle nuts are manufactured using a metal-cutting production process. Through this, properties such as high dimensional accuracy and high surface quality are fulfilled. In addition, the use of POM plastic gives the nut characteristics of good sliding and wear properties as well as high heat resistance and dimensional stability. 1602.20-05 1602.20-06 13001.20-06            13008.20-10 13008.20-10 Thread           TR 10x2Right-hand threadsingle threadDIN 103     TR 10x3Right-hand threadsingle threadDIN 103     TR 10x3Left-hand threadsingle threadDIN 103      TR 10x6 P3Right-hand threaddouble threadDIN 103 SG 10x10 P2Right-hand threadfive-start threadDIN 380 Dimensions Outer diameter d1: 20mm      Length a: 20mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mm      Length a: 20mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mmLength a: 20mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mm      Length a: 20mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 20mm      Length a: 20mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Material POM    POM    POM     POM     POM     Matching spindle Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel and stainless steel Application Round nuts with trapezoidal thread TR 10 and SG 10 POM Our round nuts with trapezoidal thread are optimally matched to our trapezoidal threaded spindles in steel and stainless steel. In combination, they form a drive system that can withstand even high loads. The matching of both elements guarantees smooth running with a minimization of running noise.  In addition to our selection of trapezoidal threaded nuts in POM, round nuts in brass and PA6-GF30 are available in our range. In addition, you can vary in shape:  Flange nuts with trapezoidal thread in POM or brass. Square nuts with trapezoidal thread in POM For further details on the product, please refer to the downloads listed below.

TR 10 l 2 versions to choose from l right-hand thread l multi-start l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseProperties of trapezoidal threaded spindle TR 10 and SG 10 - stainless steel In addition to our trapezoidal threaded spindles in steel, our variants in stainless steel meet further customer requirements. Like the steel variants, the threaded spindles in stainless steel have different thread designs. While the classic trapezoidal threads (TR) meet the requirements of DIN 103, the special threads are adapted to this and can meet requirements that go beyond the standard. Both the TR10 and SG10 threaded rods have a diameter of 10mm and are available in 1-meter lengths. Both versions are right-hand threaded and have the following key data: -TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread). -SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread) All of our trapezoidal lead screws go through a rolled manufacturing process. The process gives the spindles an uninterrupted grain, making them a homogeneous material structure. The high strength, durability and high surface quality are just a few of the many qualitative properties of our threaded rods. You would like to complete the spindle with the matching trapezoidal thread nut? Then choose between different materials and shapes your nut for the optimal drive solution.  13012.14-V02L1000 13900.14-V02L1000 Thread TR 10x6 P3rolledRight-hand threadtwo-course     SG 10x10 P2rolledRight-hand threadfive-course Material Stainless steel(1.4021)    Stainless steel (1.4021)    Length 1000mm 1000mm Matching nut Round nut in POM / brassFlange nut in POM / brass  Round nut in POM Flange nut in POM Application Trapezoidal Screw TR 10 and SG 10 - Stainless Steel The trapezoidal lead screws are used for the transmission of high axial forces and wherever the conversion of a rotary motion into a linear one is required. Other specific areas of application include mechanical engineering, use as a drive and positioning unit, in fastening and clamping applications or within positioning and travel ranges.

TR10 l 5 Varianten zur Auswahl l Rechts- und Linksgewinde l ein- oder mehrgängig l Stahl  gerollt l Länge 1000mm l DIN 103Characteristics Trapezoidal screws TR 10 and SG 10 - steel Trapezoidal threaded spindles with a diameter of 10mm available in different thread variants. The range includes trapezoidal threaded spindles (TR) and spindles with special threads (SG). These in turn vary from each other by different thread pitches, gears, and right-hand and left-hand versions: TR 10x2 (thread pitch 2mm l single thread - right-hand thread). TR 10x3 (thread pitch 3mm l single thread - left-hand and right-hand thread) TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread) SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread) The trapezoidal thread spindles (TR) are standardized according to DIN 103. The special threads (SG) are adapted to this standard. Both spindle versions are available in different threads. The length is 1 meter for all versions. The spindles are characterized by their high strength and uninterrupted grain and are the result of the rolled manufacturing process. The backlash-free adjustment and readjustment, the long service life, the high surface quality as well as the low friction are further characteristics of our threaded spindles.  You are welcome to complete your drive solution with the appropriate nuts. The nuts are available in different shapes and materials in our store. 13014.14-V01L1000 13010.14-V00L1000 13011.14-V00L1000 13012.14-V00L1000 13030.14-V00L1000 Gewinde           TR 10x2gerolltRechtsgewindeeingängig     TR 10x3gerolltRechtsgewindeeingängig TR 10x3gerolltLinksgewindeeingängig TR 10x6 P3gerolltRechtsgewindezweigängig SG 10x10 P2gerolltRechtsgewindefünfgängig Länge 1000mm  1000mm  1000mm  1000mm  1000mm  Material Stahl (C15K) Stahl (11SMnPb30+C+TE) Stahl (11SMnPb30+C+TE) Stahl (11SMnPb30+C+TE) Stahl (C15K)     Passende Mutter     Rundmutter in POM / Messing  Rundmutter in POM / MessingVierkantmutter in POM Rundmutter in POM / MessingVierkantmutter in POM Rundmutter in POM / MessingFlanschmutter in POM / Messing  Rundmutter in POMFlanschmutter in POM Application Trapezoidal screws TR 10 and SG 10 - Steel The threaded spindles transmit large axial forces and convert rotary movements into linear ones. They are used in mechanical engineering and serve as drives and positioning units. Furthermore, they can be used as components for travel and positioning. No suitable spindle? Then it is worth taking a look at our spindle range. There you will find further spindles in different materials and diameters. In addition, the suitable nut can be selected.

TR12 l 4 variants to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l Brass l Based on DIN 380 Properties flanged nut with trapezoidal thread SG 12 brass Our flanged spindle nuts have a trapezoidal thread with special dimension. The special design (SG) is based on DIN and meets our customers' requirements outside the standard. Flanged nuts have an enlarged bearing surface for a secure hold even on soft materials made of metal and plastic. SG 12 threads are right-handed and differ in their threads: - SG 12x7 P3.5 (thread pitch 7mm P3.5 l double thread - right hand thread). - SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread) - SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) - SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread) The characteristic is given to our spindle nut by the used special brass (CuZn40Al2) and the machining manufacturing process. Corrosion resistance, high dimensional accuracy and surface quality are resulting properties.    13515.20-04 13508.20-04 13024.20-04 13029.20-04 Thread          SG 12x7 P3,5Right-hand threadtwo-courseDIN 380    SG 12x9 P3Right-hand threadthree-courseDIN 380 SG 12x12 P4Right-hand threadthree-courseDIN 380 SG 12x16 P4Right-hand threadfour-courseDIN 380 Dimensions Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlansch d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Mounting 6-hole  6-hole  6-hole    6-hole  Material Brass (CuZn40Al2)    Brass (CuZn40Al2)      Brass (CuZn40Al2)      Brass (CuZn40Al2)      Matching spindle  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal thread spindle in steeland stainless steel Trapezoidal threaded spindle in steel Application Flanged nut with trapezoidal thread SG 12 Brass  The spindle nut can be used in many different ways. For example, as a component for adapter plates, indexing plungers or exhaust suspensions, or in combination with our trapezoidal threaded spindles to form a unit as a drive solution. Due to the optimal matching of the spindle and the nut, smooth running can be generated. This allows the use even in noise sensitive environments. In addition to our brass versions, you may be interested in the following nut variants in our range: more flange nuts with trapezoidal thread in POM - Round nuts with trapezoidal thread in POM, - brass or PA6-GF30 - Square nut with trapezoidal thread in POM

TR 10 l 2 Ausführungen zur Auswahl l Rechtsgewinde l Außendurchmesser 32mm l Länge 14mm l POM l DIN 103Properties trapezoidal threaded nut with flange SG 12 POM The flanged nut is a nut with an enlarged bearing surface. The bearing surface is a washer attached to the underside, which ensures fastening even on soft materials made of metal and plastic. In order for the flange nut to have a firm hold, pre-drilled holes are made on the flange surface for fastening. SG 12 trapezoidal threaded nuts have multi-start threaded versions with different thread pitch: - SG 12x7 P3.5 (thread pitch 7mm P3.5 l double thread - right hand thread). - SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread) - SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) - SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread) - SG 12x30 P6 (thread pitch 30mm P6 l five-start - right-hand thread)  The flange nuts are provided with a special thread (SG). These threads are based on DIN 380. The nuts are made of POM and go through a machining production process for high dimensional accuracy and surface quality.   13515.20-02 13508.20-02 13024.20-02 13029.20-02 13517.20-10 Thread           SG 12x7 P3,5Rechtsgewindetwo-courseDIN 380 SG 12x9 P3Right-hand threadthree-courseDIN 380     SG 12x12 P4Right-hand threadthree-courseDIN 380      SG 12x16 P4Right-hand threadfour-courseDIN 380 SG 12x30 P6Right-hand threadfive-courseDIN 103 Dimensions Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Mounting 6 hole 6 hole 6 hole 6 hole   4 hole   Material POM    POM    POM     POM     POM     Matching spindle   Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Application Trapezoidal Threaded Nut with Flange SG 12 POM The flange nuts are suitable for use wherever a secure hold is required. Examples are the application with adapter plates, indexing bolts or exhaust hangers. In addition, the combination with trapezoidal threaded spindles is a common application for converting rotating movements into linear ones.  Besides the flange nuts made of POM, the variants made of brass are also suitable for said application. Furthermore, you can discover other variants in our assortment: Round nut with trapezoidal thread in POM, brass and PA6-GF30 Square nuts in POM

TR12 l 9 variants to choose from l Right and left-hand thread l Outer diameter 26mm l Length 24mm l Brass l DIN 380Properties trapezoidal threaded nut round TR 12 and SG 12 brass Our trapezoidal threaded nuts in sizes TR 12 and SG 12 are characterized by their wide range of variants. In addition to right-hand and left-hand threads, you can choose between single-start and multi-start as well as thread dimensions according to standard and special threads. Our trapezoidal threads of the spindle nuts according to standard (TR) are certified according to DIN 103 and DIN 308. The special threads from Ketterer Antriebe are based on this standard and meet individual customer requirements: - TR 12x2 (thread pitch 2mm l single thread - right-hand thread). - TR 12x3 (thread pitch 3mm l single thread - left-hand thread or right-hand thread) - TR 12x6 P3 (thread pitch 6mm P3 l double thread - left hand thread or right hand thread) - SG 12x7 P3,5 (thread pitch 7mm P3,5 l double thread - right hand thread) - SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread) - SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) - SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread) The spindle nuts with trapezoidal thread are produced by machining. Within the manufacturing process, excess material is removed in the form of chips. The use of special brass CuZn40Al2 gives the nut the property of high corrosion resistance. 1602.20-48 1602.20-50 1602.20-27 1602.20-44 1602.20-25 Thread          TR 12x2Right-hand threadcatchyDIN 380    TR 12x3Right-hand threadcatchyDIN 380     TR 12x3Left-hand threadcatchyDIN 380      TR 12x6 P3Right-hand threadtwo-courseDIN 380 TR 12x6 P3Left-hand threadtwo-courseDIN 380 Dimensions Outer diameter d1: 26mmLength a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm    Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mmLength a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Material Brass (CuZn40Al2)  Brass (CuZn40Al2)  Brass (CuZn40Al2)   Brass (CuZn40Al2)  Brass (CuZn40Al2)   Matching spindle Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel 13515.20-08 13508.20-08 13024.20-08 13029.20-08 Thread          SG 12x7 P3,5Right-hand threadtwo-courseangelehnt an DIN 103     SG 12x9 P3Right-hand threadthree-courseangelehnt an DIN 103     SG 12x12 P4Right-hand threadthree-courseangelehnt an DIN 103      SG 12x16 P6Right-hand threadfour-courseangelehnt an DIN 103 Dimensions Outer diameter d1: 26mm Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H AOuter diameter d1: 26mmLength a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm  Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Material Brass (CuZn40Al2) Brass (CuZn40Al2) Brass (CuZn40Al2) Brass (CuZn40Al2) Matching spindle  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Application Trapezoidal Thread Nut Round TR 12 and SG 12 Brass Our variety of round nuts with trapezoidal thread can be combined with our trapezoidal threaded spindles in steel and stainless steel. Due to the optimal matching of nut and spindle, the running noise is minimized when converting rotary movements into linear ones. Due to the resulting smooth running, even use in noise-sensitive areas can be guaranteed.

SG12x30 P6 l five-start l right-hand thread l outside diameter 26mm l length 24mm l polyamide l based on DIN 103Properties trapezoidal threaded nut SG 12 PA6-GF30 Our trapezoidal thread nuts made of polyamide are available in sizes 14 and 12. Both versions have a multi-start special thread. The special thread is a right-handed trapezoidal thread and is based on DIN 103. Our SG 12x30 P6 round nuts are manufactured using a metal-cutting production process. This gives the nut a high dimensional accuracy and surface quality. In addition, the nut is characterized by its material properties. Polyamide (PA6-GF30) is reinforced with 30% glass fiber and is therefore characterized by higher strength, rigidity, creep resistance and dimensional stability. Application Trapezoidal Thread Nut SG 12 PA6-GF30 The trapezoidal thread nuts made of polyamide can form a drive solution with our trapezoidal thread spindles. The combination of the two units creates a system that is coordinated in itself. Running noise is minimized and smooth running is achieved. The system solution offers the application for the conversion of rotating movements into linear ones even under high axial forces.

TR12 l 9 variants to choose from l Right-hand or left-hand thread l Outer diameter 26mm l Length 24mm l POM l DIN 380Properties Round nut with trapezoidal thread TR 12 and SG 12 POM Our round nuts with trapezoidal thread are movement threads with a nominal dimension of the thread of 12mm. This variant is available as left-hand thread as well as right-hand thread. In addition, our range includes nuts according to DIN (TR) as well as nuts with special threads (SG). Our trapezoidal threads TR are standardized according to DIN 103 and 380. Our special threads SG are adapted to this standard and can satisfy needs outside the standard. Get an overview of our selection of round nuts TR 12 and SG 12: - TR 12x2 (thread pitch 2mm l single thread - right hand thread) - TR 12x3 (thread pitch 3mm l single thread - left hand thread or right hand thread) - TR 12x6 P3 (thread pitch 6mm P3 l double thread - left hand thread or right hand thread) - SG 12x7 P3,5 (thread pitch 7mm P3,5 l double thread - right hand thread) - SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread)  -SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) - SG 12x16 P4 (thread pitch 16mm P4 l four threads - right hand thread) All our trapezoidal thread nuts are matched by matching trapezoidal thread spindles as counterparts. Both in steel and stainless steel, the spindles can be combined with the spindle nut.  Our round nuts with trapezoidal thread made of POM are characterized by high heat resistance and dimensional stability. During the machining production process, excess material is removed in the form of chips. This results in high accuracy and surface quality.  1602.20-42 1602.20-52 1602.20-29 1602.20-46 1602.20-31 Thread           TR 12x2Right-hand threadsingle threadDIN 380    TR 12x3Right-hand threadsingle threadDIN 380     TR 12x3Left-hand threadsingle threadDIN 380      TR 12x6 P3Right-hand threaddouble threadDIN 380 TR 12x6 P3Left-hand threaddouble threadDIN 380 Dimensions Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mmLength a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Material POM    POM    POM     POM     POM     Matching spindle  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel 13515.20-06 13508.20-06 13024.20-06 13029.20-06 Thread        SG 12x7 P3,5Right-hand threaddouble threadDIN 103     SG 12x9 P3Right-hand threadthree-courseDIN 103     SG 12x12 P4Right-hand threadthree-courseDIN 103      SG 12x16 P6Right-hand threadfour-courseDIN 103 Dimensions Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm Chamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mmLength a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Material POM    POM    POM     POM     Passende Spindel   Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Application Round nuts with trapezoidal thread TR 12 and SG 12 POM The round nut with trapezoidal thread is mainly used in combination with our trapezoidal threaded spindles in steel and stainless steel. By interacting, they form a unit for use as a drive solution. Large axial forces can be transmitted and rotating movements can be converted into linear movements. By matching the nut to the spindles, running noise can be minimized. The resulting smooth running allows the use even in noise-sensitive areas.  Besides round nuts in POM, variants in brass and PA6-GF30 are part of our product range. In addition, flange nuts or square nuts with trapezoidal thread could be an alternative: Flange nuts with trapezoidal thread in POM or brass. Square nuts with trapezoidal thread in POM For more information, please refer to the links below.

TR12 l 6 variants to choose from l Right and left hand thread l Single or multiple threads l Square 21.7mm l Length 31.7mm l DIN 103 l POMProperties square nut with trapezoidal thread TR 12 and SG 12 POM The square nuts with trapezoidal thread TR 12 and SG 12 have a nominal thread size of 12mm. In addition, the square nuts have a whole range of variation options. In addition to right-hand threads, left-hand threads as well as single-start and multiple-start threads are also available: SG 12x100 P8.3 (thread pitch 100mm P 8.3 l 12-start - right-hand thread) TR 12x2 (thread pitch 2mm l single thread - right hand thread) TR 12x6 P3 (thread pitch 6mm P3 l double thread - right hand thread) SG 12x30 P6 (thread pitch 30mm P6 l five-start - left-hand thread) TR12x3 ( thread pitch 3mm l single thread - right hand) The thread versions are available as trapezoidal thread according to standard (TR) and as special thread (SG). The threads according to standard are manufactured according to DIN 103 and thus standardized. The special threads are adapted to this standard. The square nuts are manufactured by means of plastic injection molding. This allows the nuts to be accurately dimensioned. In addition, the material POM (PA66 or Delrin) gives the nuts durable and robust properties. 3038.20-39 3038.20-38 3038.20-37 3051.20-02 3051.20-05 3010.20-24 Thread TR 12x2right-hand threadsingel threadDIN 103 TR 12x6 P3right-hand threaddouble threadDIN 103 TR 12x6 P3left-hand threaddouble threadDIN 103 SG 12x100 P8,3Right-hand thread12-threadbased on DIN 103 SG 12x30 P6Left-hand thread5-thread TR12x3 Right hand thread single Material POM POM POM POM Derlin 100 natur PA66 natur + M0S2 (0,3%) anthrazit) Matching spindle Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel  Trapezoidal threaded spindle in steel and stainless steel   Application Square nuts with trapezoidal thread TR 12 and SG 12 POM   The square nuts are suitable for the interaction between nut and spindle. The optimum coordination of both units allows a drive solution to be generated. This has a running smoothness that even permits use in noise-sensitive areas.Further nut variants can be found under the following links: Round nuts with trapezoidal thread in POM, brass or PA6-GF30 Flange nuts with trapezoidal thread in POM or brass Back to the overview

TR 12 l 4 versions to choose from l Right and left hand thread l Single or multiple threads l Stainless steel ( 1.4104 ) rolled l Length 1000mm l DIN 103Features Trapezoidal screws TR 12 and SG 12 - stainless steel  Our trapezoidal thread spindles in stainless steel (1.4021) with a diameter of 12mm are available in different thread versions. Besides the standardized trapezoidal thread (TR) according to DIN 103, the variants with special thread (SG) have been adapted to standardized norms. Both thread types are available with right-hand thread: - TR 12x3 (thread pitch 3mm l single thread - right-hand thread). - SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) - SG 12x30 P6 (thread pitch 30mm P6 l five-start - right-hand thread) - SG 12x30 P6 (thread pitch 30mm P6 l five-start - left-hand thread) The spindles go through the rolled manufacturing process. The threaded rods owe their high strength and uninterrupted grain to this process. The homogeneous material structure is also characterized by the wear-resistant surface and the associated long service life. In addition, the trapezoidal threaded rod combines the ability to transmit large axial forces with mechanical properties such as backlash-free adjustment and readjustment as well as low friction and high surface quality. To optimize the drive solution, you can choose suitable trapezoidal lead screw nuts in different materials and shapes in our online store. 13005.14-V02L1000 13024.14-V02L1000 13517.14-V01L1000 13520.14-V02L1000 Thread TR 12x3rolledRight-hand threadcatchy     SG 12x12 P4rolledRight-hand thread three-course SG 12x30 P6 Right-hand threadfive-course SG 12x30 P6rolledLeft-hand threadfive-course Length 1000mm  1000mm  1000mm  1000mm  Material Edelstahl (1.4021)    Edelstahl (1.4021)     Edelstahl (1.4021)     Edelstahl (1.4021) Matching nut   Round nut in POM /  Round nut in POM / brassFlange nut in POM / brass Round nut in PA6-GF30Flange nut in POM Round nut in stainless steel Application trapezoidal threaded spindles TR 12 and SG 12 - stainless steel  Both the lead screws with trapezoidal thread and the rods with special thread are considered as drive solutions. They are used wherever a rotary motion is to be converted into a linear one. The trapezoidal threaded spindles made of stainless steel are used in mechanical engineering and in fastening and clamping applications. In addition, a use as a drive and control unit or the use within travels and positioning are options of the spindle.  You have not found the right spindle yet? Then take a look at our spindle range.

TR12 l 12 variants to choose from l Right and left hand thread l Single or multiple threads l Rolled steel l Length 1000mm l DIN 103Features trapezoidal threaded spindles TR 12 and SG 12 - steel  The range of our threaded spindles includes trapezoidal threaded spindles (TR) and spindles with special thread (SG). The spindles have a diameter of 12mm and vary in their thread pitch: TR 12x2 (thread pitch 2mm l single thread - right hand thread). TR 12x3 (thread pitch 3mm l single thread - left hand thread and right hand thread) TR 12x6 P3 (thread pitch 6mm P3 l double thread - left hand and right hand thread) SG 12x7 P3,5 (thread pitch 7mm P3,5 l double thread - right hand thread) SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread) SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread) SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread) SG12x30 P6 (thread pitch 30mmP6 l five-start - left-hand thread and right-hand thread) SG 12x100 P8,3 (thread pitch 100mm P8,3 l 12-start - right-hand thread) Our versions with trapezoidal thread (TR) are standardized according to DIN 103. The threaded spindles with special thread (SG) are adapted to this standard. The spindle versions are uniformly available in 1 meter lengths and differ in their thread pitch. The threaded spindles with special thread have a multi-start thread and withstand applications under high loads. The ends of our spindles are sawn and not deburred. Both the trapezoidal threaded spindles and the rods with special threads owe their high strength and uninterrupted grain to the rolled manufacturing process. In addition, a high surface quality, backlash-free adjustment and readjustment, low friction and durability characterize the quality product.  Our store offers you the possibility to combine the spindles with matching nuts in different shapes and materials to use the threaded spindles as an optimal drive solution.  13022.14-V00L1000 13005.14-V01L1000 13006.14-V00L1000 13007.14-V01L1000 13019.14-V00L1000 Thread          TR 12x2rolledRight-hand thread catchy     TR 12x3rolledRight-hand threadcatchy TR 12x3rolledLeft-hand threadcatchy TR 12x6 P3rolledRight-hand threadtwo-course TR 12x6 P3rolledLeft-hand threadtwo-course Length 1000mm  1000mm  1000mm  1000mm  1000mm  Material steel (11SMnPb30+C)    steel (C15K)     steel (11SMnPb30+C+TE)       steel (C15K)      steel (11SMnPb30+C+TE)     fitting nut     Round nut in POM/brass square nut in POM Round nut in POM/brass Round nut in POM/brass Round nut in POM/brass square nut in POM Round nut in POM/brass square nut in POM 13515.14-V00L1000  13508.14-V00L1000      13024.14-V00L1000       13029.14-V00L1000    13518.14-V00L1000 Gewinde           SG 12x7 P3,5rolledRight-hand threadtwo-course     SG 12x9 P3rolledRight-hand threadthree-course SG 12x12 P4rolledRight-hand threadthree-course SG 12x16 P4rolledRight-hand threadfour-course SG 12x100 P8,3rolledRight-hand threadtwelve-course Länge 1000mm  1000mm  1000mm  1000mm  1000mm  Material steel (C15)    steel (11SMnPb30+C+TE)    steel (C15K) steel (11SMnPb30+C+TE) steel (C45K)     Passende Mutter     Round nut in POM/brass square nut in POM/brass Round nut in POM/brass square nut in POM/btass Round nut in POM/brass square nut in POM/brass Round nut in POM/brass square nut in POM/brass aquare nut in POM 13520.14-V01L1000  13517.14-V00L1000    Gewinde           SG 12x30 P6rolledLeft-hand threadfive-course     SG 12x30 P6rolledRight-hand threadffive-course  Länge 1000mm  1000mm    Material steel (C15K)    steel (C15K)         Passende Mutter     square nut in POM   Round nut in polyamidsquare nut in POM Application trapezoidal thread spindles TR 12 and SG 12 - steel The spindles with trapezoidal thread and special thread are used in mechanical engineering. They are also used as drives and control units or are part of traverse paths and positioning systems. In their application, they transmit large axial forces and convert rotary movements into linear ones. Are you looking for a spindle with a different diameter or made of a different material? Under the following links you will find further spindle variants and the matching threaded nuts for your drive solution.

TR14 l 2 versions to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l Brass l Based on DIN 380Properties flanged nut with trapezoidal thread SG 14 brass SG 14 spindle nuts have a nominal thread size of 14mm. The thread is characterized as a special thread (SG). The special threads from Ketterer Antriebe are based on DIN and at the same time meet individual customer requirements. The trapezoidal thread nuts with flange are characterized by their enlarged contact surface. This guarantees a secure hold, which is also supported by the 6-hole fastening. The spindle nuts offered here have multi-start thread versions: - SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread) - SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread) By means of a machining manufacturing process, the flange nuts are made of brass. The brass used is a special brass (CuZn40Al2) and is characterized by its high corrosion resistance.   13034.20-08 13042.20-04 Gewinde           SG 14x16 P4Right-hand threadfour-courseDIN 380    SG 14x20 P4Right-hand threadfive-courseDIN 380 Abmessungen Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Befestigung 6-hole 6-hole   Material Brass (CuZn40Al2)    Brass (CuZn40Al2)      Passende Spindel   Trapezoidal thread spindle in steeland stainless steel Trapezoidal threaded spindle in steel Application Flange nut with trapezoidal thread SG 14 Brass  The flange nuts are suitable for use, for example, with adapter plates, indexing plungers or exhaust suspensions. In addition, drive solutions can be generated in combination with our trapezoidal thread spindles. These allow rotating movements to be converted into linear ones, even under high loads.  Not found a suitable nut? Then it is worth taking a look at our large selection of trapezoidal threaded nuts: more flange nuts with trapezoidal thread in POM - Round nuts with trapezoidal thread in POM, - brass or PA6-GF30 - Square nuts with trapezoidal thread in POM

Features trapezoidal threaded nut with flange SG 14 POM. SG 14 flange nuts are nuts with an enlarged bearing surface for fastening even on soft materials made of metal and plastic. The flange nuts are characterized by their secure hold. This hold is additionally supported by the pre-drilled holes on the flange surface. Ketterer Antriebe offers 4- and 6-hole alternatives.  The spindle nuts with trapezoidal thread have a special thread (SG). This thread is aligned with DIN 380 and meets requirements outside the standard. Within the range of special threads, multi-start threads with different pitches are available: - SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)  - SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread) - SG 14x30 P5 (thread pitch 30mm P5 l six-start - right-hand thread) The trapezoidal flanged nuts are made of POM. This material gives the flange nuts high heat resistance and dimensional stability. In addition, the machining production process results in high dimensional accuracy and surface quality.   13034.20-06 13042.20-02 13112.20-06 Thread           SG 14x16 P4Right-hand threadfour-courseDIN 380     SG 14x20 P4Right-hand threadfive-courseDIN 380 SG 14x30 P5Right-hand threadsix-courseDIN 380    Dimensions Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm     Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H Mounting 6-hole 6-hole 4-hole  Material POM    POM     POM     Matching spindle   Trapezoidal threaded spindle in steel and stainless steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel and stainless steel Application Flange nut with trapezoidal thread SG 14 POM The flange nut with trapezoidal thread is suitable for use in combination with our trapezoidal threaded spindles. The unit forms a coordinated system for a drive with smooth running. The drive solution is ideal for converting rotary movements into linear ones. Furthermore, the flange nut can be used where a secure hold is required. The flange nut is used in practice for adapter plates, indexing bolts or exhaust suspensions.   You will find further nuts in the Ketterer Antriebe range. In addition to flange nuts, round nuts and square nuts extend the range of products. More flange nuts with trapezoidal thread in brass Round nuts with trapezoidal thread in POM, brass and PA6-GF30 Square nuts in POM

SG 14x16 P4 l four-start l right-hand thread l outside diameter 20mm l length 20mm l brass l based on DIN 380Properties Round nut with trapezoidal thread SG 14 Brass The round nut with trapezoidal thread with a thread dimension of 14mm is characterized by its special thread (SG). The special threads of Ketterer Antriebe are based on the standard according to DIN (here DIN 389) and meet requirements outside the standard. Our SG 14 trapezoidal thread nuts have a multi-start right-hand thread and withstand even high loads.  The spindle nut is made of a special brass (CuZn40Al2). This impresses with its high corrosion resistance. Our round nut is manufactured from the blank by means of the metal-cutting production process. As a result, high dimensional accuracy and high surface quality are among the properties of the brass spindle nut.  13034.20-12 Thread          SG 14x16 P4Right-hand threadfour-coursebased on DIN 380     Dimensions Outer diameter d1: 26mm      Length a: 24mmchamfer outside f1/f2: 1x45°Tolerance field: 7H Material Brass (CuZn40Al2)  Matching spindle  Trapezoidal screw spindles in steel and stainless steel Application Round nuts with trapezoidal thread SG 14 The spindle nut can be ideally combined with the trapezoidal thread spindles in our range. The interaction of both units offers an optimal drive solution for use in diverse areas. Even noise-sensitive applications can be covered by matching the nut to the spindle. Here, running noises are minimized and the drive is characterized by smooth running.  In addition to the brass variants, POM and PA6-GF30 are part of our range of nuts. Also the shaping can be selected according to your wishes.

SG 14x16 P4 l right-hand thread l four-start l outside diameter 26mm l length 24mm l POM l based on DIN 380Properties round nuts with trapezoidal thread SG 14 POM The trapezoidal thread nut with a nominal dimension of the thread of 14mm is provided with a right-hand thread. The thread is multi-start and is characterized as a movement thread: - SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread). The round nut with trapezoidal thread SG 14x16 P4 is a special thread. This is based on the standard 380 and is marked SG. Despite the specification, our nuts can be combined with the matching trapezoidal thread spindle. These are available with the same thread designs in steel and stainless steel. The lead screw nut is manufactured from POM (plastic) within a machining manufacturing process. The POM gives the nut high heat resistance and dimensional stability. It also gives it good sliding and wear properties. In addition, the machining manufacturing process allows the excess material to be removed in the form of chips. The process enables high accuracy and gives the finished acme screw nut a high surface quality. 13034.20-10 Thread           SG 14x16 P4Right-hand threadfour-courseDIN 380     Dimensions Outer diameter d1: 26mm      Length a: 24mmChamfer outside f1/f2: 1x45°Tolerance field: 7H Material POM    Matching spindle   Trapezoidal screw spindles in steel and stainless steel Application Round nut with trapezoidal thread SG 14 POM Our round nuts in combination with our trapezoidal threaded spindles form a unit for use as a drive system. The counterpart to our trapezoidal thread nut is available in steel and stainless steel in our product range. By matching the dimensions, running noise can be reduced in the application and smooth running can be guaranteed. In addition, the drive system offers the possibility to transmit large axial forces and to convert rotary movements into linear ones. Are you looking for a nut in a different material or shape? Then it is worth taking a look at our range of trapezoidal threaded nuts: more round nuts with trapezoidal thread in brass or PA6-GF30 flange nuts with trapezoidal thread in POM or brass Square nuts with trapezoidal thread in POM For more information, please refer to the downloads below.

TR14 l 5 variants to choose from l Right and left hand thread l Single or multiple threads l Square 22mm l Length 32mm l DIN 103 l POMProperties square nut with trapezoidal thread TR 14 and SG 14 POM The square nuts with trapezoidal thread are available with both right-hand and left-hand threads. In addition, they can be differentiated into thread versions according to standard (TR) and special thread (SG). The special threads from Ketterer Antriebe are based on DIN and meet requirements outside the standard.     - SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread) - TR 14x3 (thread pitch 3mm l single thread - right hand thread and left hand thread) - TR 14x4 (thread pitch 4mm l single thread - right hand thread and left hand thread) The square nuts are manufactured by means of plastic injection molding. This guarantees an exact production even for small components. The POM (PA66 or Delrin) used has durable and robust properties and can withstand any application.        3038.20-02 3038.20-01 3038.20-42 3038.20-07 3038.20-46 Thread           TR 14x3Right-hand threadsingle threadDIN 103    TR 14x3Left-hand threadsingle threadDIN 103     TR 14x4Right-hand threadsingle threadDIN 103    TR 14x4Left-hand threadsingle threadDIN 103 SG 14x20 P4Right-hand threadfive-courseDIN 103 Material POM    POM    POM     POM     POM     Matching spindle  Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Trapezoidal threaded spindle in steel Application Square nut with trapezoidal thread TR 14 and SG 14 POM The trapezoidal thread nuts are suitable for use in combination with our trapezoidal thread spindles. Together they form a unit as an optimal drive solution. The matching of both elements generates a smooth running for use even in noise-sensitive areas. In addition to our square nuts, there are other variants to be discovered: - Round nuts with trapezoidal thread in POM, - brass or PA6-GF30 - Flange nuts with trapezoidal thread in POM or brass

TR 14 l 2 versions to choose from l right-hand thread l multi-start l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseCharacteristics trapezoidal threaded spindle SG 14 - stainless steel Our SG 14 trapezoidal threaded spindles in stainless steel have a special thread which has been adapted to the DIN 380 standard. The thread spindles with a diameter of 14mm vary in their thread pitch: - SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread). - SG 14x30 P5 (thread pitch 30mm P5 l six-start - right-hand thread) Both versions are available with a length of 1 meter and are characterized by a multi-start right-hand thread, which withstands applications under high loads. The trapezoidal leadscrews are capable of transmitting large axial forces. They are manufactured by the rolled process. Within this, the spindle is given an uninterrupted grain. The homogeneous material structure can thus justify a high strength. In addition, properties such as a high surface quality, backlash-free adjustment and readjustment, low friction and the longevity of the trapezoidal thread spindle can be attributed. In order to use the spindle as an optimal drive solution, we offer you a selection of suitable trapezoidal leadscrew nuts in our store. 13034.14-V02L1000 13112.14-V02L1000 Thread          SG 14x16 P4rolledRight-hand threadfour-course  SG 14x30 P5rolledRight-hand threadsix-course Material Stainless steel    Stainless steel   Length 1000mm 1000mm Matching nut Round nut in POM / brassFlange nut in POM / brass  Round nut in PA6-GF30 Flange nut in POM Application Trapezoidal screw SG 14 - Stainless steel Trapezoidal lead screws are used to drive and transmit axial forces. The application is primarily concerned with the conversion of rotating into linear movements. In addition to mechanical engineering, fastening and clamping applications benefit from the advantages of the spindle. Further fields of application can be found as drive and positioning unit or as part of traverse paths and positioning.   You will find further versions of our trapezoidal lead screws in our range of products and services. Furthermore, we recommend to have a look at our range of trapezoidal leadscrew nuts.