DC gear motor with worm gear 24V

Preview: DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7

Preview: DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Zeichnung

Preview: DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Zeichnung1

Preview: DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Motorkabel

DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7

DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Zeichnung

DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Zeichnung1

DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7 Motorkabel

From €77.39 *

Prices incl. VAT plus shipping costs

Order number: 3133.00-0002-MAA111

Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was... more

Close menu

Product information "DC-Motor with gear 24V"

Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields as well. A cable with AMP plug and an integrated Hall-sensor allows an easy and secure control of the entire system. You can find a suitable spindle unit with motor adapter here.

Special features

Two integrated Hall-sensors for measurement of the revolutions and direction of rotation
Continuous internal hexagon in wrench widths 6 mm, 7 mm, 9 mm
Good self-locking properties
Low noise
100 mm + 1750 mm motor cable with connector included
Can be combined with most Ketterer spindle systems

Technical notes

To ensure secure operation the motor must be operated in the predefined installation position (see installation position/mounting).
The drive working range (nominal torque) is determined for a service life of 10,000 double strokes.
The connection position of the drive in the entire system with vibration damping elements can be beneficial. However, the functional reliability position of the drive in the application should be tested.
Through the controller* the system is regulated such that the speed in the entire drive working range is kept as constant as possible.
By using a controller with a short-circuit brake the holding torque position of the drive can be increased.

* In combination with LogicData control box Compact-3

Model	3133.00-0002	3133.00-0003	3133.00-0001
Version	with brake	with brake	with brake
Motor	DC Motor 24 V	DC Motor 24 V	DC Motor 24 V
Sensor/Power supply	Hall/5 V DC/0,3 A	Hall/5 V DC/0,3 A	Hall/5 V DC/0,3 A
Protection class	IP30	IP30	IP30
Idle running speed	120 rpm (24 V)	120 rpm (24 V)	120 rpm (24 V)
Duty cycle with idle running	20% (at 5 Min.)	20% (at 5 Min.)	20% (at 5 Min.)
Rated torque*	2,5 Nm	2,5 Nm	2,5 Nm
Duty cycle with 3,5 Nm*	20 sec ON 4min. OFF	20 sec ON 4min. OFF	20 sec ON 4min. OFF
Short-term peak torque (< 1 sec)	5 Nm	5 Nm	5 Nm
Input	hex 6mm	hex 6 mm	hex 6 mm

Model	3133.00-0014	3133.00-0010	3133.00-0012
Version	without brake	without brake	without brake
Motor	DC Motor 24 V	DC Motor 24 V	DC Motor 24 V
Sensor/Power supply	Hall/5 V DC/0,3 A	Hall/5 V DC/0,3 A	Hall/5 V DC/0,3 A
Protection glass	IP30	IP30	IP30
Idle running speed	120 rpm (24 V)	120 rpm (24 V)	120 rpm (24 V)
Duty cycle with idle running	20% (at 5 Min.)	20% (at 5 Min.)	20% (at 5 Min.)
Rated torque*	3,5 Nm	3,5 Nm	3,5 Nm
Duty cycle with 3,5 Nm*	20 sec ON 4min. OFF	20 sec ON 4min. OFF	20 sec ON 4min. OFF
Short-term peak torque (< 1 sec)	5 Nm	5 Nm	5 Nm
Input	hex 6 mm	hex 7 mm	hex 9 mm

* Determined at full load for service life of 10.000 double strokes

Related links to "DC-Motor with gear 24V"

Available downloads: