TR 16 round nuts with trapezoidal thread POM
TR16 l 4 variants to choose from l Right-hand or left-hand thread l Outer diameter 36mm l Length 32mm l POM l DIN 103
Properties
Our TR16 trapezoidal thread nut has a nominal thread size of 16m. The thread is a movement thread and is available in single-start or multiple-start versions. In addition to the selection of different thread pitches, a choice can be made between right-hand and left-hand threads:
- TR 16x2 (thread pitch 2mm l single thread - left hand thread or right hand thread)
- TR 16x4 (thread pitch 4mm l single thread - right-hand thread)
- TR 16x8 P4 (thread pitch 8mm P4 l double thread - right hand thread)
The round nuts with trapezoidal thread (TR) meet the requirements of DIN 103 and are therefore standardized. The present trapezoidal threaded nut is produced by machining from the material POM (plastic). In the process, excess material is removed in the form of chips. This process ensures high accuracy and surface quality. Our round nuts are matched to our range of spindles in terms of their dimensions. In combination, they form a unit for use as a drive solution. In this respect, our trapezoidal threaded nut lives up to its name as a spindle nut.
1602.20-05 | 1602.20-06 | 13001.20-06 | 13008.20-10 | |
Thread | TR 16x2 Left-hand thread single thread DIN 103 |
TR 16x2 Right-hand thread single thread DIN 103 |
TR 16x4 Right-hand thread single thread DIN 103 |
TR 16x8 P4 Right-hand thread double thread DIN 103 |
Dimensions | Outer diameter d1: 36mm Length a: 32mm Chamfer outside f1/f2: 1x45° Tolerance field: 7H |
Outer diameter d1: 36mm Length a: 32mm Chamfer outside f1/f2: 1x45° Tolerance field: 7H |
Outer diameter d1: 36mm Length a: 32mm Chamfer outside f1/f2: 1x45° Tolerance field: 7H |
Outer diameter d1: 36mm Length a: 32mm Chamfer outside f1/f2: 1x45° Tolerance field: 7H |
Material | POM | POM | POM | POM |
Matching spindle | Trapezoidal thread spindle steel | Trapezoidal thread spindle in stainless steel | Trapezoidal thread spindle insteel and stainless steel | Trapezoidal thread spindle steel |
Application
The application of our nuts is mostly in combination with our trapezoidal thread spindles. These are available as precisely fitting counterparts in steel and stainless steel. The system of spindle and nut forms a unit for the transmission of large axial forces and the conversion of rotary movements into linear movements. By matching our trapezoidal leadscrew nuts to our spindles, running noise can be minimized and smoothness optimized. In addition to the round nuts in POM, our spindle nuts can also be supplied in brass and PA6-GF30. Different nut variants in terms of shaping complete our range:
- Flange nut with trapezoidal thread in POM or brass
- Square nut with trapezoidal thread in POM
For further information, please refer to the downloads listed below.
Login