Axles & Sleeves, Universal joints and Shaft Couplings
Our range includes steel and aluminium universal joints, black anodised aluminium shaft couplings and axles and sleeves for mechanical engineering, model making and hobby applications. Universal joints are designed to transmit torque between shafts of different orientations and are available in a variety of designs and sizes. Shaft couplings are used to connect aligned shafts and are available in a range of sizes and accessories to suit a wide range of applications.
Alu l 12mm bore and cone l Ø 18 mm
From
€11.04*
11.9 mm cone l 12mm bore l outer Ø 18mm l length 65mm l anodised aluminium l available individually , set of 5 or set of 10Properties Universal joint l Length 65 mmUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 12mm bore on the one hand and a pin on the other. The universal joint is made of aluminum and the surface is anodized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l hole and pinDesign: 11.9mm trunnion/12mm boreMaterial: anodized aluminummax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 18 mmlength: 65 mmApplication universal joint l bore and pinThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Aluminium l 12mm bore on both sides l Ø 18mm
From
€11.04*
12mm bore on both sides l outer diameter 18mm l length 58mm l anodised aluminium l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 12mm bore on both sides. The universal joint is made of aluminum and the surface is anodized.
The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided boreDesign: 12mm bore on both sidesmaterial: anodized aluminummax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 18 mmlength: 58 mmApplication universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Bushing 18x12x45 mm
€18.60*
Outer diameter 18 mm / 12 mm l Inner diameter 12 mm / M5 l Length 45 mm l Aluminium black anodised l incl. feather keys and threaded pinCoupling with a groove for the connection of two aligned shafts. For the usage in mechanical engineering, in model making and in the hobby area.Outside diameter:18 mm / 12 mmInside diameter:12 mm / M5Length:45 mmMaterial:Aluminium black anodized (AICuBiPb)Accessory:Fitting key DIN 6885-A4x4x12 1pcs.Threaded pin DIN 916-M5x4 2pcs.in delivery included
Clutch axle12x4x45 mm
€27.85*
Connecting element l Outer diameter 12 mm l Inner diameter 4 mm l Length 45 mm l Aluminium or steel incl. feather keys
Properties coupling piece
Our coupling axle is made of aluminium or steel and has the dimensions 12x4x45 mm. The coupling piece is suitable for connecting two aligned shafts and is sometimes used in mechanical engineering, model making or hobby applications. This is why the coupling bushes are also called connecting elements.
Features coupling piece
Outer diameter
12 mm
Inner diameter
4 mm
Length
45 mm
Material
Aluminium or steel
Accessories
Feather keys DIN 6885-A4x4x12 (2 pcs. included in delivery)
Properties Claw coupling l Aluminum l
€41.28*
7 versions to choose from l torsionally flexible l aluminium l bore 1 from 8 - 10 mm Ø 4P9 l bore 2 from 8 - 12 mm Ø 4P9 or for individual machining and splined shaft profileFeatures claw coupling l Aluminum l
Torsionally flexible claw couplings can be used as connecting elements. The coupling is used to connect two shafts together and is available in different dimensions in the store. Our claw couplings are made of aluminum. The ideal complement to our 2010 worm gear units and 200 bevel gear units.
Features claw coupling l Aluminum l
Hardness damping element:
75 Shore A
Temperature range:
-20 / +60 C°
Weight approx:
28 g
Material claw:
Aluminium
Material damping element
Elastollan
Technical data claw coupling aluminum
Item number
5790.12-0001
5790.12-0002
5790.12-0003
5790.12-0004
5790.12-0005
5790.12-0006
5790.12-0007
Hole 1
Ø 12mm 4P9
Ø 12mm 4P9
Ø 12mm 4P9
Ø 10mm 4P9
Ø 8mm 4P9
Ø 10mm 4P9
Ø 12mm 4P9
Hole 2
Ø 12mm 4P9
for indiv. editing
Ø 8mm Clamp connection
Ø 10mm 4P9
Ø 8mm 4P9
Ø 6 mm Clamp connection
for splined shaft profile DIN 5463 6x12x20
Application claw coupling l aluminum
Torsionally flexible couplings also known as flexible couplings have a wide range of applications in mechanical engineering. The claw couplings are needed to dampen speed and torque shocks. They are also used to compensate for misalignment of the drive shafts.
Sleeve round D=12 - 18 mm
€19.85*
4 versions to choose from l Outside Ø 12 - 18 mm l Inside Ø 6 - 12 mm l Length 30 - 45 mm l With groove l Aluminium black anodisedFeatures sleeve
Our sleeve serves as a connecting element and is suitable for connecting two aligned shafts with each other. The sleeve has a groove and is available with different dimensions. The sleeve was made of aluminum and finds its application in mechanical engineering, model making and in the hobby sector.
Features sleeve
Execution:
With groove
Material:
Aluminum black anodized (AICuBiPb)
Mounting thread f. screws:
M5 (screws included 4 pcs.)
Versions sleeve
1004.11-01
1010.11-01
1012.11-01
1073.11-01
Outer diameter
12mm
14mm
18mm
16mm
Inner diameter
6mm
8mm
12mm
10mm
Length
30mm
45mm
45mm
45mm
Steel l hex 7 mm on both sides l Ø 16mm
From
€11.92*
hexagon 7mm on both sides l outer diameter 16mm l length 52mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l double-sided 6kt SW7Universal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a hexagon socket SW6 on both sides. The universal joint is made of steel and the surface is galvanized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l hex SW7 on both sidesDesign: 6kt SW7 on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 16 mmlength: 52 mmmounting thread for screws: M5 (screws included in delivery)Application universal joint l both sides 6kt SW7The universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torques or rotary movements of non-linearly aligned shafts have to be transmitted. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 10mm bore on both sides l Ø 16mm universal joint
From
€12.71*
10mm hole on both sides l outer diameter 16mm l length 52mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sides Our universal joints are offered in various designs and dimensions. The present universal joint variant has a bore on both sides with a diameter of 10mm. The universal joints are made of steel. Their surface is galvanized. The joint serves as a connecting element. It is suitable for connecting two aligned shafts with each other.
The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.Features universal joint l bore on both sidesDesign: 10mm bore on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 16 mmlength: 52 mmmounting thread for screws: M5 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications are for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 4mm hole on both sides l Ø 13 mm
From
€10.61*
4mm bore l outer diameter 13mm l length 42mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 4mm bore on both sides. The universal joint is made of steel and the surface is galvanized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided holeDesign: 4 mm hole on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 2 Nmmax. angle of inclination: 40outer diameter: 13 mmlength: 42 mmmounting thread for screws: M4 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 6mm bore on both sides l Ø 16mm universal joint
From
€10.72*
6mm hole on both sides l outer diameter 16mm l length 52mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a bore on both sides of 6mm. The universal joint is made of steel and the surface is galvanized.
The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided holeDesign: 6 mm hole on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 16 mmlength: 52 mmmounting thread for screws: M5 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications are for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 6mm hole on both sides l Ø 13mm
From
€11.92*
6mm bore l outer diameter 13mm l length 42mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a bore on both sides of 6mm. The universal joint is made of steel and the surface is galvanized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided holeDesign: 6 mm hole on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 2 Nmmax. angle of inclination: 40outer diameter: 13 mmlength: 42 mmmounting thread for screws: M4 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 8 mm hole on both sides l Ø 16mm
From
€9.07*
8 mm hole on both sides l outer diameter 16mm l length 52mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a bore on both sides of 8mm. The universal joint is made of steel and the surface is galvanized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided holeDesign: 8 mm hole on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 16 mmlength: 52 mmmounting thread for screws: M5 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications are for example in mechanical engineering, in the hobby sector or in model making.
back to the overview
Steel l 8mm bore on both sides l Ø 13mm universal joint
From
€12.02*
8mm bore l outer diameter 13mm l length 42mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l bore on both sidesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a bore on both sides of 8mm. The universal joint is made of steel and the surface is galvanized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l double sided holeDesign: 8 mm hole on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 2 Nmmax. angle of inclination: 40outer diameter: 13 mmlength: 42 mmmounting thread for screws: M4 (screws included in delivery)Application universal joint l bore on both sidesThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.back to the overview
Steel l hex 6mm on both sides l Ø 16mm universal joint
From
€12.71*
hexagon 6mm on both sides l outer diameter 16mm l length 52mm l steel, surface galvanised l available individually , set of 5 or set of 10Properties universal joint l hexagon on both sides l Ø 16mmUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store.The present product variant is characterized by a hexagon socket on both sides. The universal joint is made of steel and the surface is galvanized.
The joints are available in different packaging units. Choose between 1, 5 and 10 pieces.
Features universal joint l hexagon on both sides l Ø 16mmDesign: 6kt SW 6 on both sidesmaterial: steel, surface galvanizedmax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 16 mmlength: 52 mmMounting thread for screws: M5 (screws included in delivery)Application universal joint l hexagon on both sides l Ø 16mmThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications are for example in mechanical engineering, in the hobby sector or in model making.
back to the overview