9 reduction ratios from 1:1 to 65:1 l anodised aluminium housing l with splined shaft profile DIN5463-6X16x20 l shaft distance 20mm Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.  Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm keyOutput: splined hub profile DIN 5463 6x16x20 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical specifications Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm  Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-K0PR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-K0PR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-K0PR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-K0PR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-S0PR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-K0PR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-K0PR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-K0PR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-K0PR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.

9 reduction ratios from 1:1 to 65:1 l anodised aluminium housing l with splined shaft profile DIN5463-6X16x20 l shaft distance 20mmWorm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.  Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Drive shaft diameter 12mm / 4mm feather key groove Splined hub profile output DIN5463 6x16x20 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical information Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm  Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-D0KR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-D0KR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-D0KR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-D0KR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-D0KR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-D0KR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-D0KR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-D0KR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-D0KR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1sAxial load on the output side 500 Nm Application Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gearbox can be used for high power transmissions in tight spaces.

FeaturesOur construction profiles are made aluminum 4kt45 and have a wall thickness of 1.5mm. The profile is supplied in 1 meter length. The surface of the mounting profiles is anodized.The aluminum profiles are characterized by their flexibility, universal design and Bosch compatibility. They guarantee the highest quality with low weight.In addition to the supplied standard profile groove for T-nuts, you can find additional accessories in our store.Technical data Outer dimensions: 4kt45 Length: 1000mm Material: AlMgSi0,5F22 Surface: anodized Application Despite their low weight, the aluminum mounting profiles are suitable for robust use and guarantee easy installation without special tools. Due to its flexible use, it finds application in a wide variety of areas and stands for sustainable metal construction. In addition to its presence in automation, the aluminum profile can be used for setting up a workstation and operating equipment. In addition to our mounting profile 45x45, we offer aluminum profiles 60x60 as another variant. In addition, mounting brackets for quick and easy assembly can be ordered in our store. The internal angles offered by us in the accessories are suitable for the assembly of, for example, frames and partition walls. In addition, our hammer nuts, hammer bolts anddistance connectors help to guarantee a secure connection.

Inside hexagon 7mm l Aluminium profile tube l Axle length 200mm or 245mm l Glass-fibre reinforced plastic l Projection 110mm Properties Our hand cranks in the design inside 6kt SW7 are available in different dimensions regarding throat depth. The hand cranks are characterized by their simple and at the same time modern design and are suitable for an easy and exact adjustment.In addition, our hand cranks are suitable for the profile bars, bevel gears and worm gears offered in our store.  Technical Specifications Item number 5187.00-V02A200 5187.00-V02A245 Execution inside hexagon SW7 inside hexagon SW7 Axis length 200mm 245mm Outreach 110mm 110mm Material crank handle glass fiber reinforced plastic glass fiber reinforced plastic Material Aluminum profile tube Aluminum profile tube Color crank body & handle black black back to the overview

Features The mounting profile consisting of aluminum, has a 4kt60 dimension. The surface of the profiles is anodized. The construction profile guarantees universal use through different connection options. In addition to the T-slot included in the scope of delivery, we offer expanding elements as accessories in our online store. Technical data Outer dimensions: 4kt60 Length: 1000mm Material: AlMgSi0,5F22 Surface: anodized Our lightweight aluminum profile guarantees flexible use according to individual requirements. Due to various connection options and the combination of the profiles, many different constructions can be realized. Besides the use in automation, the mounting profiles are considered as an important element in the working environment or as a unit for furniture in private use. Besides our assembly profile 60x60, we offer aluminum profiles 45x45 as another variant. Moreover, mounting angles for quick and easy assembly can be ordered in our store. The internal angles offered by us in the accessories are suitable for the assembly of, for example, frames and partitions. In addition, our hammer nuts, hammer bolts anddistance connectors help to guarantee a secure connection.

Motor connection cable / adapter cable Molex to MASSimilar to Molex Mini-Fit-JR, pitch 4,2mmDual-row, 8 circuits.2x crimp Contacts: 171639-16x crimp Contacts: 170365-1overmold black, outer Jacket black2x AWG18 for PWRA and PWRB5x AWG26, outer Jacket black.DIN 41524, female, outer mold blackAll Parts must be RoHS conform.

11.9 mm cone l 12mm bore l outer Ø 18mm l length 65mm l anodised aluminium l available individually , set of 5 or set of 10PropertiesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 12mm bore on the one hand and a pin on the other. The universal joint is made of aluminum and the surface is anodized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces. FeaturesDesign: 11.9mm trunnion/12mm boreMaterial: anodized aluminummax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 18 mmlength: 65 mmApplicationThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making.back to the overview

12mm bore on both sides l outer diameter 18mm l length 58mm l anodised aluminium l available individually , set of 5 or set of 10PropertiesUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 12mm bore on both sides. The universal joint is made of aluminum and the surface is anodized. The joints are available in different packaging units. Choose between 1, 5 and 10 pieces. FeaturesDesign: 12mm bore on both sidesmaterial: anodized aluminummax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 18 mmlength: 58 mmApplicationThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications can be found for example in mechanical engineering, in the hobby sector or in model making. back to the overview

12 mm cone l 12mm bore l outer Ø 18mm l length 71mm l aluminium anodised l available individually , set of 5 or set of 10Properties Universal joint l Length 71 mmUniversal joints can be used as connecting elements. The joint is used to connect two aligned shafts with each other and is available in different dimensions in the store. The present product variant is characterized by a 12mm bore on the one hand and a pin on the other. The universal joint is made of aluminum and the surface is anodized.The joints are available in different packaging units. Choose between 1, 5 and 10 pieces. Features universal joint l hole and pinDesign: 12mm pin/12mm holeMaterial: anodized aluminummax. torque in Nm: 3 Nmmax. angle of inclination: 40outer diameter: 18 mmlength: 71 mmApplication universal joint l bore and pinThe universal joints are designed for a maximum angle of inclination of 40°. They can be used in any application where torque or rotary motion must be transmitted from non-linearly aligned shafts. Applications are for example in mechanical engineering, in the hobby sector or in model making. back to the overview

The angles are designed for quick and easy installation of aluminium profiles. The mounting angles are made of die-cast aluminium and are intended for 45x45 or 60x60 profiles. The assembly is done with groove blocks. Material: Die-cast aluminium Suitable to: Aluminium profile 45x45 /60x60 groove 10 Mountin material: Groove blocks (not included in the delivery)

Mounting flange for Ket-Motion 2020 gearbox l Aluminium l incl. mounting material l 45° gridTo ensure secure mounting of our Ket-Motion 2020 worm gear units, we offer you a mounting flange with screws and holes in a 45° grid. This aluminium mounting flange is used for the individual and simple fixing of our 2020 worm gear units: The flange is supplied with fixing material. Back to the overview

Profile end caps made of aluminium AIMgSiO,5 as an ideal complement to our notched wave profile incl. fixing material

14 variants to choose from l Outer diameter 14 - 65mm l Inner diameter 10 - 55mm l Length 1000mm l Aluminium Properties Our round aluminum tubes have different outside diameters. These range from 14mm to 65mm. In addition, the profile tubes vary in their inner diameters, which are available from 10mm to 55mm. Technical specifications Length 1000mm ( +/- 1mm) Material Aluminum pipe AIMgSi0,5F22 Surface blank Variant selection Item number 1261.11-V31L1000 1261.11-V32L1000 1261.11-V33L1000 1261.11-V34L1000 Outer diameter 14mm 20mm 25mm 30mm Inner diameter 10mm 18mm 23mm 22mm Length 1000mm 1000mm 1000mm 1000mm       Item number 1261.11-V35L1000 1261.11-V36L1000 1261.11-V37L1000 Outer diameter 34,8mm 55mm 65mm Inner diameter 33,3mm 45mm 55mm Length 1000mm 1000mm 1000mm

6 versions to choose from l outer diameter 12mm l hexagon socket SW6 - SW8 l length 1000mm l black anodised Properties Our aluminum profile tubes have a round shape outside with a diameter of 12mm. Inside the aluminum tubes have an internal hexagon, which varies in its wrench size depending on the article. The profile tubes are black anodized and available in lengths of 1000mm. Matching to this profile tube you can get profile rods made of steel and profile rods made of stainless steel. Technical data Outer diameter 12mm (+/-0,15) Material Aluminum pipe AIMgSi0,5F22 Surface black anodized Variant selection Item number 1261.11-V01L1000 1261.11-V02L1000 1261.11-V03L1000 Outer diameter 12mm (+/-0,15) 12mm (+/-0,15) 12mm (+/-0,15) Hexagon socket SW6 SW7 SW8 Length 1000mm 1000mm 1000mm

2 versions to choose from l External square 22 l Internal square 19.1 l Length 1000mm  l Aluminium tube AIMgSI0.5 blankProperties The present profile tube is a square tube made of aluminum. The tube has a wall thickness of 1.5mm. The surface of the square tube is bright.  Besides square tubes, there are other shape variants of aluminum in our assortment as well as profile tubes made of steel. Technical specifications Outside 4kt 22 (+/- 0,15) Inside 4kt 19,1 (+0,2) Length 1000mm  (+/- 1mm) Material Aluminum pipe AIMgSI0,5 Surface  blank

2 versions to choose from l Outer diameter 19mm l Inner diameter 11mm DIN5480l Length 1000mm l Aluminium tube AIMgSi0,5 blank Properties Our round tube with multi-tooth profile inside is made of aluminum with a bright surface. The multi-tooth profile has 10 teeth and is manufactured according to DIN 5480. The tubes are available in 1000mm. Technical data External diameter: 19mm (-0,25) Internal diameter: 11mm Execution: multi-toothed profile Length: 1000mm (+/- 1mm) Material: Aluminium AIMgSi0,5 Surface: blank

2 versions to choose from l Outer diameter 29mm l Inner diameter 26mm DIN5480l Length 1000mm l Aluminium tube AIMgSi0,5F22 blank Properties Our aluminum profile tubes are round on the outside and have a multi-tooth profile on the inside. This is manufactured according to DIN 5490 and has 26 teeth. The profile tube is available in 1000mm length.  Technical data External diameter: 29mm (+/- 0,15) Internal diameter: 26mm (+0,05/- 0,15) Execution: multi-toothed profile DIN 5480 Length: 1000mm (+/- 1mm) Material: Aluminium AIMgSi0,5F22 Surface: blank

10 sizes l reduction ratios 1:1 l housing anodised aluminium l backlash on the output shaft 3° ± 1° l maintenance-free and low-noise Angular gear Ket-Bee 200X L-Gearbox The bevel gearbox family consists of 10 sizes for a wide range of applications as angular gearboxes. The gearbox is characterised by its compact design with maximum torque, robustness and smooth power transmission. Simple screw fastening enables uncomplicated installation. Service life of 1,000 hours: full load and input speed of 500 rpm and duty cycle 20% at 5 min and   Duty cycle: 20 % bei 5 Min ( 1 min ON, 4 min OFF) Permitted operating temp -20 bis 60 C° Ratio 1:1 1:1 Backlash at drive shaft 3° +/- 1° Execution: Hardened steel bevelled wheels Anodised aluminium housing Maintenance-free and low-noise Technical specifications Bevel gearbox L-gearbox 90° Order no. Housing dimension  Ø Shaft Threaded hole inside Speed range n in min-1 Max. Torque M in Nm Radial and axial load* Part weight in kg FR in N  FA in N  2000.00-L0A04R1 26 x 26 x 15 Ø4j5 M2,5x5 100/500/1000 0,28/0,08/0,04 48 48 0,029 2001.00-L0A06R1 32 x 32 x 18 Ø6j6 M3x8 100/500/1000 0,35/0,1/0,05 60 60 0,052 2002.00-L0A06R1 35 x 35 x 20 Ø6j6 M3x8 100/500/1000 0,75/0,3/0,15 100 100 0,073 2002.00-L0A08R1 35 x 35 x 20 Ø8j6 M3x8 100/500/1000 0,75/0,3/0,15 100 100 0,073 2003.00-L0A08R1 42 x 42 x 24 Ø8j6 M4x8 100/500/1000 2,5/1/0,5 120 120 0,142 2003.00-L0A10R1 42 x 42 x 24 Ø10j6 M4x8 100/500/1000 2,5/1/0,5 120 120 0,142 2004.00-L0A08R1 46 x 46 x 26 Ø8j6 M4x8 100/500/1000 4/1,5/0,75 140 140 0,189 2004.00-L0A12R1 46 x 46 x 26 Ø12j6 M5x8 100/500/1000 4/1,5/0,75 140 140 0,189 2005.00-L0A08R1 53 x 53 x 30 Ø8j6 M4x8 500/200/100 5/2/1 240 240 0,268 2005.00-L0A12R1 53 x 53 x 30 Ø12j6 M5x8 100/500/1000 5/2/1 240 240 0,268 2006.00-L0A10R1 56 x 56 x 32 Ø10j6 M4x8 100/500/1000 8/3/1,5 550 550 0,330 2006.00-L0A12R1 56 x 56 x 32 Ø12j6 M5x8 100/500/1000 8/3/1,5 550 550 0,330 2007.00-L0A12R1 60 x 60 x 35 Ø12j6 M5x8 100/500/1000 10/4/2 550 550 0,189 2008.00-L0A12R1 68 x 68 x 40 Ø12j6 M5x8 500/200/100 12/5/2,5 600 600 0,570 2009.00-L0A12R1 77 x 77 x 45 Ø12j6 M5x8 500/200/100 14/6/3 750 750 0,800 *The values of FR only apply if FA = 0 N The values of FA only apply if FR = 0 N Application Bevel gearbox Ket-Bee 200X A bevel gearbox family consisting of 10 sizes for a wide range of applications as angular gearboxes. The gearboxes are suitable wherever movement and forces need to be transmitted at an angle.

10 sizes l Reductions 1:1 l Housing anodised aluminium l With keyway 12mm/4mm l Maintenance-free and low-noise Bevel gearbox Ket-Bee 200X T-gearbox The bevel gearbox family with continuous shaft consisting of 10 sizes for versatile use as angular gearboxes. Compact design with maximum torque, robustness and smooth power transmission characterise the gearbox. A simple screw fastening enables uncomplicated assembly.     Lifetime of 1,000 hours at: full load and Input speed of 500 rpm and Duty cycle 20% at 5 min and Ambient temperature 20 C°   Duty cycle: 20 % at 5 Min ( 1 min ON, 4 min OFF) Operating temperature: -20 bis 60 C° Ratio 1:1 Backlash on drive shaft: 3° +/- 1° Design: Hardened steel bevel gears Anodised aluminium housing Maintenance-free and low-noise   Technical data bevel gearbox T-gear 90° Item no. Speed n in rqm Max. totque M in Nm Radial-und Axial load * part weight in kg FR in N  FA in N  2000.00-T0A04R1 100/500/1000 0,28/0,08/0,04 48 48 0,03 2001.00-T0A06R1 100/500/1000 0,35/0,10/0,05 60 60 0,06 2002.00-T0A06R1 100/500/1000 0,75/0,30/0,15 100 100 0,07 2003.00-T0A08R1 100/500/1000 2,5/1/0,5 120 120 0,13 2004.00-T0A08R1 100/500/1000 4/1,5/0,75 140 140 0,17 2005.00-T0A08R1 100/500/1000 5/2/1 240 240 0,19 2006.00-T0A10R1 100/500/1000 8/3/1,5 550 550 0,24 2007.00-T0A12R1 100/500/1000 10/4/2 550 550 0,40 2008.00-T0A12R1 100/500/1000 12/5/2,5 600 600 0,59 2009.00-T0A12R1 100/500/1000 14/6/3 750 750 0,80   *The values of FR apply only when FA = 0 NThe values of FA apply only when FR = 0 N Application bevel gearbox Ket-Bee A bevel gearbox family consisting of 10 sizes for versatile use as angular gearboxes. The gearboxes are suitable wherever movement and forces have to be transmitted at an angle. Zurück zur Übersicht

Outer Ø 22mm l Inner Ø 10mm l Width 6 mm l Stainless steel l With sealing washer l Available individually in sets of 5 or 10Ball bearing stainless steel 10x22x6 mm with sealing discs on both sides to give protection against moisture and dirt. The stainless steel deep groove ball bearings are designed for axial as well as for radial load. They rotate at high speeds cause of their low friction. DimensionsExternal 22mmInternal 10mmWidth 6mm All ball bearings are available in the following quantities: one piece, five pieces or 10 pieces. back to the overview

Outer Ø 26mm l Inner Ø 10mm l Width 8 mm l Stainless steel l With sealing washer l Available individually in sets of 5 or 10 Ball bearing stainless steel 10x26x8 mm with sealing discs on both sides to give protection against moisture and dirt. The stainless steel deep groove ball bearings 6000 2RS SS are designed for axial as well as for radial load. They rotate at high speeds cause of their low friction. DimensionsExternal 26mmInternal 10mmWidth 8mm All ball bearings are available as graduated: 1 piece, 5 pieces or 10 pieces. back to the overview

Outer Ø 28mm l Inner Ø 10mm l Width 8 mm l Stainless steel l With sealing washer l Available individually in a set of 5 or set of 10 Ball bearing stainless steel 10x28x8 mm with sealing discs on both sides to give protection against moisture and dirt. The stainless steel deep groove ball bearings 161002 RS VA are designed for axial as well as for radial load. They rotate at high speeds cause of their low friction.   Dimensions External 28mmInternal 10mmWidth 8mm All ball bearings are available in the following quantities: one piece, five pieces or 10 pieces. back to the overview

Outer Ø 30mm l Inner Ø 10mm l Width 9 mm l Stainless steel l With sealing washer l Available individually in a set of 5 or set of 10 Ball bearing stainless steel 10x30x9 mm with sealing discs on both sides to give protection against moisture and dirt. The stainless steel deep groove ball bearings are designed for axial as well as for radial load. They rotate at high speeds cause of their low friction. DimensionsExternal 30mmInternal 10mmWidth 9mm All ball bearings are available in the following quantities: one piece, five pieces or 10 pieces. back to overview

Outer Ø 28mm l Inner Ø 12mm l Width 8 mm l Stainless steel l With sealing washer l Available individually in a set of 5 or set of 10 Ball bearing stainless steel 12x28x8 mm with sealing discs on both sides to give protection against moisture and dirt. The stainless steel deep groove ball bearings 6001 2RS SS are designed for axial as well as for radial load. They rotate at high speeds cause of their low friction. DimensionsExternal 28mmInternal 12mmWidth 8mm All ball bearings are available in the following quantities: one piece, five pieces or 10 pieces. back to the overview