TR 25 flange nuts with trapezoidal thread POM
€36.30*
SG25 l 5 variants to choose from l Right-hand thread l Outer diameter 58mm l Length 28mm l POM l Based on DIN 103
Properties
The flange nuts are special nuts that have a washer on their underside. This washer increases the bearing surface of the nut. This makes it possible to fix the nut even to soft materials made of metal or plastic without damaging them. Our flange nuts are fixed by means of predefined holes. Due to the 6-hole fixation of our SG 25 nuts, the component is secured against slipping. The flange nuts with trapezoidal thread have special threads (SG). These are based on DIN 103 and meet requirements outside the standard. In addition, you can choose between single and multi-start threads with different pitches:
13601.20-02
13603.20-02
13602.20-02
13700.20-02
13704.20-02
Thread
SG 25x4Right-hand threadsingle threadbased on DIN 103
SG 25x7 P3,5Right-hand threadtwo-startbased on DIN 103
SG 25x12 P6Right-hand threadtwo-startbased on DIN 103
SG 25x100 P4Right-hand thread25-threadbased on DIN 103
SG 25x9 P3Right-hand thread3-threadbased on DIN 103
Dimensions
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Fastening
6-hole
6-hole
6-hole
6-hole
6-hole
Material
POM
POM
POM
POM
POM
Matching spindle
Spindle tube in aluminium
Spindle tube in steelSpindle tube in aluminium
Spindle tube in aluminium
Spindle tube in aluminium
Spindle tube in aluminium
Application
The flange nut increases its bearing surface by means of a washer. This allows it to be fastened to soft materials made of metal and plastic without leaving any damage or losing its hold after a short time. This is additionally supported by the securing via the fastening holes. These properties are particularly helpful where a secure hold is necessary, such as on adapter plates, indexing bolts or exhaust mounts. In addition, the flange nuts can also be optimally combined with our spindle tubes. The unit offers a smooth-running drive solution for use in even noise-sensitive areas.
In addition to our flange nuts made of POM, our range also includes other variants made of brass.Further information can be found in the downloads.
Back to the overview