Flange nuts are nuts with an enlarged contact surface for fixing to soft materials such as metal or plastic. The surface is not damaged and the nut does not lose its grip. For secure fastening, our online shop offers flange nuts with 4-hole and 6-hole fixing options. Depending on the application, the nuts are also available in POM and brass and vary in different thread pitches. For use as part of a drive system, suitable trapezoidal threaded spindles can be found in our range.
TR 10 l 2 versions to choose from l Right-hand thread l Outer diameter 32mm l Length 14mm l POM l DIN 103Properties Flange nuts with trapezoidal thread TR 10 and SG 10 POM
Our flange nuts with trapezoidal thread are nuts with an enlarged bearing surface for a secure hold under load. Our nuts with a nominal thread size of 10mm have an additional 4-hole fastening option. The flange nuts are available with trapezoidal thread according to standard (TR) or with a special thread (SG). The TR variant complies with DIN 103 and therefore meets the requirements of the standard. Our special threads are adapted to this standard.
- TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread)
- SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread)
The flange nuts are produced by means of a machining process. In this process, excess material is removed in the form of chips. In addition to the brass variants in the range, the present nuts are made of POM material. This material is characterized by high heat resistance and dimensional stability.
13012.20-02
13030.20-02
Thread
TR 10x6 P3Right-hand threadtwo-courseDIN 103
SG 10x10 P2Rechtsgewindefive-courseangelehnt an DIN 103
Dimensions
Flange d1: 14mmFlange d2: 32mmFlange d3: 23mm Length a: 14mmHeight b: 5mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 0,5x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 26mmFlange d2: 48mmFlange d3: 38mm Length a: 20mmHeight b: 7mmChamfer f1: 0,5x45°Chamfer f2: 0,5x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
4-hole
4-hole
Material
POM
POM
Matching spindle
Trapezoidal thread spindle in steel and stainless steel
Trapezoidal thread spindle in steel and stainless steel
Application Flange nuts with trapezoidal thread TR 10 and SG 10 POM
The flange nuts are used in areas where a secure hold is required. Examples are adapter plates, indexing plungers or exhaust suspensions. In addition, the combination with trapezoidal threaded spindles offers the application for a drive solution. Due to the optimally matched elements, smooth running can be guaranteed.
These nut variants might also be of interest to you:
More flange nuts with trapezoidal thread in brass.Round nuts with trapezoidal thread in POM, brass and PA6-GF30 Square nuts in POM
TR 10x6 P3 l double thread l right-hand thread l outer diameter 32mm l length 14mm l brass l DIN 103Properties flange nut with trapezoidal thread TR 10 brass
Our flange nut with trapezoidal thread (TR) is standardized according to the standard and has a nominal thread size of 10mm. In addition, the flange nut is characterized by an enlarged contact surface. This guarantees a secure hold, even on soft materials made of metal and plastic. For fastening the nut, the variant with 4 holes is offered. The offered spindle nut is characterized by its multi-start right-hand thread:
- TR 10x6 P3 (thread pitch 6mm P3 l double thread - right-hand thread).
The flanged trapezoidal lead screw nuts undergo a machining production process. This removes excess material in the form of chips. By means of this process, high dimensional accuracy and surface quality can be guaranteed. The special brass used (CuZn40Al2), on the other hand, provides the flanged nut with high corrosion resistance.
13012.20-04
Thread
TR 10x6 P3Right-hand threadtwo-courseDIN 103
Dimensions
Flange d1: 14mmFlange d2: 32mmFlange d3: 23mm Length a: 14mmHigh b: 5mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 0,5x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
4-hole
Material
Brass (CuZn40Al2)
Matching spindle
Trapezoidal thread spindle in steeland stainless steel
Application Flanged nut with trapezoidal thread TR 10 Brass
The spindle nut is used for adapter plates, indexing plungers, exhaust suspensions as well as in combination with our trapezoidal threaded spindles. These are matched to the trapezoidal thread nuts in terms of their thread dimensions. As a result, they form a unit when used as a drive solution.
TR 10 l 2 Ausführungen zur Auswahl l Rechtsgewinde l Außendurchmesser 32mm l Länge 14mm l POM l DIN 103Properties trapezoidal threaded nut with flange SG 12 POM
The flanged nut is a nut with an enlarged bearing surface. The bearing surface is a washer attached to the underside, which ensures fastening even on soft materials made of metal and plastic. In order for the flange nut to have a firm hold, pre-drilled holes are made on the flange surface for fastening. SG 12 trapezoidal threaded nuts have multi-start threaded versions with different thread pitch:
- SG 12x7 P3.5 (thread pitch 7mm P3.5 l double thread - right hand thread).
- SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread)
- SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread)
- SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)
- SG 12x30 P6 (thread pitch 30mm P6 l five-start - right-hand thread)
The flange nuts are provided with a special thread (SG). These threads are based on DIN 380. The nuts are made of POM and go through a machining production process for high dimensional accuracy and surface quality.
13515.20-02
13508.20-02
13024.20-02
13029.20-02
13517.20-10
Thread
SG 12x7 P3,5Rechtsgewindetwo-courseDIN 380
SG 12x9 P3Right-hand threadthree-courseDIN 380
SG 12x12 P4Right-hand threadthree-courseDIN 380
SG 12x16 P4Right-hand threadfour-courseDIN 380
SG 12x30 P6Right-hand threadfive-courseDIN 103
Dimensions
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHeight b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
6 hole
6 hole
6 hole
6 hole
4 hole
Material
POM
POM
POM
POM
POM
Matching spindle
Trapezoidal threaded spindle in steel
Trapezoidal threaded spindle in steel
Trapezoidal threaded spindle in steel and stainless steel
Trapezoidal threaded spindle in steel
Trapezoidal threaded spindle in steel and stainless steel
Application Trapezoidal Threaded Nut with Flange SG 12 POM
The flange nuts are suitable for use wherever a secure hold is required. Examples are the application with adapter plates, indexing bolts or exhaust hangers. In addition, the combination with trapezoidal threaded spindles is a common application for converting rotating movements into linear ones.
Besides the flange nuts made of POM, the variants made of brass are also suitable for said application. Furthermore, you can discover other variants in our assortment:
Round nut with trapezoidal thread in POM, brass and PA6-GF30
Square nuts in POM
TR12 l 4 variants to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l Brass l Based on DIN 380
Properties flanged nut with trapezoidal thread SG 12 brass
Our flanged spindle nuts have a trapezoidal thread with special dimension. The special design (SG) is based on DIN and meets our customers' requirements outside the standard. Flanged nuts have an enlarged bearing surface for a secure hold even on soft materials made of metal and plastic. SG 12 threads are right-handed and differ in their threads:
- SG 12x7 P3.5 (thread pitch 7mm P3.5 l double thread - right hand thread).
- SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread)
- SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread)
- SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)
The characteristic is given to our spindle nut by the used special brass (CuZn40Al2) and the machining manufacturing process. Corrosion resistance, high dimensional accuracy and surface quality are resulting properties.
13515.20-04
13508.20-04
13024.20-04
13029.20-04
Thread
SG 12x7 P3,5Right-hand threadtwo-courseDIN 380
SG 12x9 P3Right-hand threadthree-courseDIN 380
SG 12x12 P4Right-hand threadthree-courseDIN 380
SG 12x16 P4Right-hand threadfour-courseDIN 380
Dimensions
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlansch d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
6-hole
6-hole
6-hole
6-hole
Material
Brass (CuZn40Al2)
Brass (CuZn40Al2)
Brass (CuZn40Al2)
Brass (CuZn40Al2)
Matching spindle
Trapezoidal threaded spindle in steel
Trapezoidal threaded spindle in steel
Trapezoidal thread spindle in steeland stainless steel
Trapezoidal threaded spindle in steel
Application Flanged nut with trapezoidal thread SG 12 Brass
The spindle nut can be used in many different ways. For example, as a component for adapter plates, indexing plungers or exhaust suspensions, or in combination with our trapezoidal threaded spindles to form a unit as a drive solution. Due to the optimal matching of the spindle and the nut, smooth running can be generated. This allows the use even in noise sensitive environments.
In addition to our brass versions, you may be interested in the following nut variants in our range:
more flange nuts with trapezoidal thread in POM
- Round nuts with trapezoidal thread in POM,
- brass or PA6-GF30
- Square nut with trapezoidal thread in POM
Features trapezoidal threaded nut with flange SG 14 POM.
SG 14 flange nuts are nuts with an enlarged bearing surface for fastening even on soft materials made of metal and plastic. The flange nuts are characterized by their secure hold. This hold is additionally supported by the pre-drilled holes on the flange surface. Ketterer Antriebe offers 4- and 6-hole alternatives. The spindle nuts with trapezoidal thread have a special thread (SG). This thread is aligned with DIN 380 and meets requirements outside the standard. Within the range of special threads, multi-start threads with different pitches are available:
- SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)
- SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread)
- SG 14x30 P5 (thread pitch 30mm P5 l six-start - right-hand thread)
The trapezoidal flanged nuts are made of POM. This material gives the flange nuts high heat resistance and dimensional stability. In addition, the machining production process results in high dimensional accuracy and surface quality.
13034.20-06
13042.20-02
13112.20-06
Thread
SG 14x16 P4Right-hand threadfour-courseDIN 380
SG 14x20 P4Right-hand threadfive-courseDIN 380
SG 14x30 P5Right-hand threadsix-courseDIN 380
Dimensions
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
6-hole
6-hole
4-hole
Material
POM
POM
POM
Matching spindle
Trapezoidal threaded spindle in steel and stainless steel
Trapezoidal threaded spindle in steel
Trapezoidal threaded spindle in steel and stainless steel
Application Flange nut with trapezoidal thread SG 14 POM
The flange nut with trapezoidal thread is suitable for use in combination with our trapezoidal threaded spindles. The unit forms a coordinated system for a drive with smooth running. The drive solution is ideal for converting rotary movements into linear ones. Furthermore, the flange nut can be used where a secure hold is required. The flange nut is used in practice for adapter plates, indexing bolts or exhaust suspensions.
You will find further nuts in the Ketterer Antriebe range. In addition to flange nuts, round nuts and square nuts extend the range of products.
More flange nuts with trapezoidal thread in brass
Round nuts with trapezoidal thread in POM, brass and PA6-GF30
Square nuts in POM
TR14 l 2 versions to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l Brass l Based on DIN 380Properties flanged nut with trapezoidal thread SG 14 brass
SG 14 spindle nuts have a nominal thread size of 14mm. The thread is characterized as a special thread (SG). The special threads from Ketterer Antriebe are based on DIN and at the same time meet individual customer requirements. The trapezoidal thread nuts with flange are characterized by their enlarged contact surface. This guarantees a secure hold, which is also supported by the 6-hole fastening. The spindle nuts offered here have multi-start thread versions:
- SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)
- SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread)
By means of a machining manufacturing process, the flange nuts are made of brass. The brass used is a special brass (CuZn40Al2) and is characterized by its high corrosion resistance.
13034.20-08
13042.20-04
Gewinde
SG 14x16 P4Right-hand threadfour-courseDIN 380
SG 14x20 P4Right-hand threadfive-courseDIN 380
Abmessungen
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 18mmFlange d2: 38mmFlange d3: 28mm Length a: 18mmHigh b: 6mmChamfer f1: 0,25x45°Chamfer f2: 0,25x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Befestigung
6-hole
6-hole
Material
Brass (CuZn40Al2)
Brass (CuZn40Al2)
Passende Spindel
Trapezoidal thread spindle in steeland stainless steel
Trapezoidal threaded spindle in steel
Application Flange nut with trapezoidal thread SG 14 Brass
The flange nuts are suitable for use, for example, with adapter plates, indexing plungers or exhaust suspensions. In addition, drive solutions can be generated in combination with our trapezoidal thread spindles. These allow rotating movements to be converted into linear ones, even under high loads.
Not found a suitable nut? Then it is worth taking a look at our large selection of trapezoidal threaded nuts:
more flange nuts with trapezoidal thread in POM
- Round nuts with trapezoidal thread in POM,
- brass or PA6-GF30
- Square nuts with trapezoidal thread in POM
Properties flange nut with trapezoidal thread TR 16 POM
The flange nuts have an enlarged bearing surface due to the washer attached to the underside. By means of this surface, the nut has advantageous properties for demanding use. To prevent the nut from slipping, it has 6 holes on the flange for secure fastening.
The TR 16 flange nuts have a trapezoidal thread according to DIN 103 and thus meet the requirements of the standard. The nuts are available in both single-start and multi-start versions:
- TR 16x4 (thread pitch 4mm l single thread - right hand thread).
- TR 16x8 P4 (thread pitch 8mm P4 l double thread - right hand thread)
The POM material used in manufacturing gives our trapezoidal flanged nuts the property of high heat deflection temperature and dimensional stability. During the machining production process, excess material is removed in the form of chips. This allows properties to be met, such as high dimensional accuracy and surface quality.
Application Flange nut with trapezoidal thread TR 16 POM
The flange nut can be fastened to soft materials made of metal and plastic by means of its enlarged contact surface without damaging them and losing its hold after a short time. Due to its firm hold, the flange nut is used, for example, on adapter plates, indexing bolts or exhaust suspensions. It also acts as a complement to our acme threaded spindles. In combination, the unit forms a drive solution for converting rotary movements into linear ones.
If you are looking for further possibilities in the field of nuts, we offer you a selection of further variations:
More flange nuts with trapezoidal thread in brass
Round nuts with trapezoidal thread in POM, brass and PA6-GF30
Square nuts in POM
TR16 l 2 versions to choose from l Right-hand thread l Outer diameter 48mm l Length 20mm l Brass l DIN 103Properties flange nut with trapezoidal thread TR 16 brass
Our flange nuts are provided with a trapezoidal thread. The trapezoidal thread is standardized according to the norm and therefore fulfills the requirements of DIN. The spindle nuts are characterized by their enlarged contact surface. This guarantees the nut a secure hold even on soft materials made of metal and plastic. The fastening is guaranteed by means of a 6-hole device. The trapezoidal flanged spindle nuts in size TR 16 have a right-hand thread and are available in single-start and multi-start versions:
- TR 16x4 (thread pitch 4mm l single thread - right hand thread).
- TR 16x8 P4 (thread pitch 8mm P4 l double thread - right hand thread)
The spindle nuts with flange are manufactured by machining. This manufacturing process gives the nut a high dimensional accuracy and surface quality. For the production Ketterer Antriebe uses a special brass (CuZn40Al2), which is characterized by its high corrosion resistance.
13001.20-04
13008.20-08
Thread
TR 16x4Right-hand threadsingle thread DIN 103
TR 16x8 P4Right-hand threadtwo-courseDIN 103
Dimensions
Flange d1: 26mmFlange d2: 48mmFlange d3: 38mm Length a: 20mmHigh b: 7mmChamfer f1: 0,5x45°Chamfer f2: 0,5x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Flange d1: 26mmFlange d2: 48mmFlange d3: 38mm Länge a: 20mmHigh b: 7mmChamfer f1: 0,5x45°Chamfer f2: 0,5x45°Chamfer f3: 1x45°Radis r1: 0,4d4 (6x): 4,3Tolerance field: 7H
Mounting
6-hole
6-hole
Material
Brass (CuZn40Al2)
Brass (CuZn40Al2)
Matching spindle
Trapezoidal thread spindle in steeland stainless steel
Trapezoidal threaded spindle in steel
Application Flange nut with trapezoidal thread TR 16 brass
The offered flange nuts are adapted to our trapezoidal thread spindles. Due to this fit, smooth running can be guaranteed. In combination, the unit is suitable for use as a drive solution. In addition to the application in combination with the spindle, flange nuts can be used, for example, for adapter plates, indexing bolts or exhaust suspensions.
In addition to our spindle nuts with flange made of brass, further variants made of POM are available. In addition, it is worth taking a look at our nut range:
- Round nuts with trapezoidal thread made of POM, brass or PA6-GF30
- Square nut with trapezoidal thread made of POM
Properties flange nut with trapezoidal thread SG 20 POM
The flange nuts are special nuts that have a washer on their bottom side. This washer increases the bearing surface of the nut. This makes it possible to fasten the nut even to soft materials made of metal or plastic without damaging them. Our threaded nuts are fixed by means of predetermined holes. Due to the 6-hole fixation of our SG 20 nuts, the component is secured against slipping. The flange nuts with trapezoidal thread have special threads (SG). These are based on DIN 103 and meet requirements outside the standard.
- SG 20x10 P2 (thread pitch 10mm l five-start - right-hand thread)
The trapezoidal thread nuts with flange are made of POM (plastic). This material withstands even robust applications due to its high heat resistance. The flange nuts are manufactured using a metal-cutting production process. In this process, excess material is removed in the form of chips. The nut shines with high dimensional accuracy and a high surface quality.
Application Flanged nut with trapezoidal thread SG 20 POM
The flanged nut increases its bearing surface by means of a washer. This allows it to be fastened to soft materials made of metal and plastic without leaving any damage or losing its hold after a short time. This is additionally supported by securing via the fastening holes. These properties are particularly helpful where a secure hold is required, such as on adapter plates, detent bolts or exhaust mounts. In addition, the flange nuts can also be optimally combined with our spindle tubes. The unit offers a smooth-running drive solution for use in even noise-sensitive areas.
In addition to our flange nuts made of POM, our range also includes other variants made of brass. You will also be inspired by other nut variants:
SG25 l 5 variants to choose from l Right-hand thread l Outer diameter 58mm l Length 28mm l POM l Based on DIN 103Properties flange nut with trapezoidal thread SG 25 POM
The flange nuts are special nuts that have a washer on their underside. This washer increases the bearing surface of the nut. This makes it possible to fix the nut even to soft materials made of metal or plastic without damaging them. Our flange nuts are fixed by means of predefined holes. Due to the 6-hole fixation of our SG 25 nuts, the component is secured against slipping. The flange nuts with trapezoidal thread have special threads (SG). These are based on DIN 103 and meet requirements outside the standard. In addition, you can choose between single and multi-start threads with different pitches:
13601.20-02
13603.20-02
13602.20-02
13700.20-02
13704.20-02
Thread
SG 25x4Right-hand threadsingle threadbased on DIN 103
SG 25x7 P3,5Right-hand threadtwo-startbased on DIN 103
SG 25x12 P6Right-hand threadtwo-startbased on DIN 103
SG 25x100 P4Right-hand thread25-threadbased on DIN 103
SG 25x9 P3Right-hand thread3-threadbased on DIN 103
Dimensions
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Flange d1: 30mmFlange d2: 58mmFlange d3: 44mm Length a: 28mmHeight b: 8mmFase f1: 0,5x45°Fase f2: 0,5x45°Fase f3: 1x45°Radius r1: 0,4d4 (6x): 6,3Tolerance field: 7H
Fastening
6-hole
6-hole
6-hole
6-hole
6-hole
Material
POM
POM
POM
POM
POM
Matching spindle
Spindle tube in aluminium
Spindle tube in steel Spindle tube in aluminium
Spindle tube in aluminium
Spindle tube in aluminium
Spindle tube in aluminium
Application Flange nut with trapezoidal thread SG 25 POM
The flange nut increases its bearing surface by means of a washer. This allows it to be fastened to soft materials made of metal and plastic without leaving any damage or losing its hold after a short time. This is additionally supported by the securing via the fastening holes. These properties are particularly helpful where a secure hold is necessary, such as on adapter plates, indexing bolts or exhaust mounts. In addition, the flange nuts can also be optimally combined with our spindle tubes. The unit offers a smooth-running drive solution for use in even noise-sensitive areas.
In addition to our flange nuts made of POM, our range also includes other variants made of brass. You will also be inspired by other nut variants:
Further information can be found in the downloads below.
Back to the overview
€36.30*
This website uses cookies to ensure the best experience possible. More information...