Our bevel gear units
are robust, powerful and compact. This means they can meet demanding
requirements in every respect. They are suitable for diverting or
transmitting rotary motion and consist of a bevel gear and a bevel pinion.
By means of special gearing, the bevel gearboxes offer smooth running.
This ensures uncompromising use even in noise-sensitive environments.
Colloquially, bevel gear drives are also known as reversing gears or angular gears. In addition, our bevel gear drives with spindle units as well as our worm gears offer further application possibilities.
8 sizes l
reduction ratios 1:1 l housing anodised aluminium l backlash on the
output shaft 3° ± 1° l maintenance-free and low-noise Angular gear Ket-Bee 200X L-Gearbox The bevel gearbox family consists of 8 sizes for a wide range of applications as angular gearboxes.
The gearbox is characterised by its compact design with maximum torque,
robustness and smooth power transmission. Simple screw fastening
enables uncomplicated installation. service life of 1,000 hours: full load and input speed of 500 rpm and duty cycle 20% at 5 min and Duty cycle: 20 % bei 5 Min ( 1 min ON, 4 min OFF) Permitted operating temp -20 bis 60 C° Ratio 1:1 1:1 Backlash at drive shaft 3° +/- 1° Execution: Hardened steel bevelled wheels Anodised aluminium housing Maintenance-free and low-noise Technical specifications Bevel gearbox L-gearbox 90° Order no. Housing dimension Ø Shaft Threaded hole inside Speed range n in min-1 Max. Torque M in Ncm Radial and axial load* Part weight in kg FR in N FA in N 2000.00-L0A04R1 26 x 26 x 15 Ø4j5 M2,5x5 100/500/1000 28/8/4 48 48 0,029 2001.00-L0A06R1 32 x 32 x 18 Ø6j6 M3x8 100/500/1000 35/10/5 60 60 0,052 2002.00-L0A06R1 35 x 35 x 20 Ø6j6 M3x8 100/500/1000 75/30/15 100 100 0,073 2002.00-L0A08R1 35 x 35 x 20 Ø8j6 M3x8 100/500/1000 75/30/15 100 100 0,073 2003.00-L0A08R1 42 x 42 x 24 Ø8j6 M4x8 100/500/1000 250/100/50 120 120 0,142 2003.00-L0A10R1 42 x 42 x 24 Ø10j6 M4x8 100/500/1000 250/100/50 120 120 0,142 2004.00-L0A08R1 46 x 46 x 26 Ø8j6 M4x8 100/500/1000 400/150/75 140 140 0,189 2004.00-L0A12R1 46 x 46 x 26 Ø12j6 M5x8 100/500/1000 400/150/75 140 140 0,189 2005.00-L0A08R1 53 x 53 x 30 Ø8j6 M4x8 500/200/100 500/200/100 240 240 0,268 2005.00-L0A12R1 53 x 53 x 30 Ø12j6 M5x8 100/500/1000 500/200/100 240 240 0,268 2006.00-L0A10R1 56 x 56 x 32 Ø10j6 M4x8 100/500/1000 800/300/150 550 550 0,330 2006.00-L0A12R1 56 x 56 x 32 Ø12j6 M5x8 100/500/1000 800/300/150 550 550 0,330 2007.00-L0A12R1 60 x 60 x 35 Ø12j6 M5x8 100/500/1000 1000/400/200 550 550 0,395 *The values of FR only apply if FA = 0 N The values of FA only apply if FR = 0 N Application Bevel gearbox Ket-Bee 200X A bevel gearbox family consisting of 8 sizes for a wide range of applications as angular gearboxes. The gearboxes are suitable wherever movement and forces need to be transmitted at an angle.
8 sizes l Reductions 1:1 l Housing anodised aluminium l With keyway 12mm/4mm l Maintenance-free and low-noise
Bevel gearbox Ket-Bee 200X T-gearbox
The bevel gearbox family with continuous shaft consisting of 8 sizes for versatile use as angular gearboxes. Compact design with maximum torque, robustness and smooth power transmission characterise the gearbox. A simple screw fastening enables uncomplicated assembly.
Lifetime of 1,000 hours at:
full load and
Input speed of 500 rpm and
Duty cycle 20% at 5 min and
Ambient temperature 20 C°
Duty cycle:
20 % at 5 Min ( 1 min ON, 4 min OFF)
Operating temperature:
-20 bis 60 C°
Ratio
1:1
Backlash on drive shaft:
3° +/- 1°
Design:
Hardened steel bevel gears
Anodised aluminium housing
Maintenance-free and low-noise
Technical data bevel gearbox T-gear 90°
Item no.
Speed n in rqm
Max. totque M inNcm
Radial-und Axial load *
part weight in kg
FR in N
FA in N
2000.00-T0A04R1
100/500/1000
28/8/4
200
200
0,03
2001.00-T0A06R1
100/500/1000
35/10/5
150
150
0,06
2002.00-T0A06R1
100/500/1000
75/30/15
150
150
0,07
2003.00-T0A06R1
100/500/1000
250/100/50
100
100
0,13
2004.00-T0A06R1
100/500/1000
400/150/75
50
50
0,17
2005.00-T0A06R1
100/500/1000
500/200/100
50
50
0,19
2006.00-T0A06R1
100/500/1000
800/300/150
50
50
0,24
2007.00-T0A06R1
100/500/1000
1000/400/200
50
50
0,40
*The values of FR apply only when FA = 0 NThe values of FA apply only when FR = 0 N
Application bevel gearbox Ket-Bee
A bevel gearbox family consisting of 8 sizes for versatile use as angular gearboxes. The gearboxes are suitable wherever movement and forces have to be transmitted at an angle.
Zurück zur Übersicht
Deflection 120 ° or 135 ° l Transmission ratio 1.3 : 1 l Drive torque 3 Nm l Maintenance-free l Designed for manual operation l Steel bevel gears
Features reversing gear 3014
A bevel gearbox family for use as a deflection gear in up to two directions. Deflection of rotational movement possible at angles of 120° or 135°. Simple screw mounting on the adaptor facilitates uncomplicated assembly.
Special features
Maintenance-free
Hardened, bearing seated steel gear cogs
Housing made of reinforced glass-fiber at an angle of 120° or 135°
Designed for manual operation
Technical data bevel gear box 3 Nm 1:1
Max. drive torque:
3 Nm
Ratio:
1 : 1
90° downward ratio:
1,33 : 1
Speed range till:
150 rpm
Input/Output:
hex 6mm
Dimensions:
35 x 45 x 45 mm
Self-locking:
no
On/Off duration:
20% (at 5 Min.)
Allowable operating temperature:
0 to 40°C
Housing:
reinforced glass-fiber
Special features:
case hardened steel gear wheels
Application bevel gear box 3 Nm 1:1
The bevel gearboxes are also called reversing gearboxes. Therefore, they are suitable for use wherever movements and forces have to be transmitted at an angle.
Deflection 120° or 135° l Transmission ratio 1.3:1 l Drive torque 3 Nm l Designed for manual operation
Properties bevel gearbox 3 Nm 1:1
A bevel gearbox family for use as a deflection gear in up to two directions. Deflection of rotational movement possible at angles of 120° or 135°. Simple screw mounting on the adaptor facilitates uncomplicated assembly.
Special features
Maintenance-free
Case hardened steel bevel wheels
Housing made of reinforced glass-fiber at an angle of 120° or 135°
Designed for the manual operation
Technical data bevel gearbox 3 Nm 1:1
Max. drive torque:
3 Nm
Ratio:
1 : 1
90° downward ratio:
1,33 : 1
Speed range till:
150 rpm
Input/Output:
hex 6mm
Dimensions:
35 x 45 x 45 mm
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
0 to 40°C
Housing:
reinforced glass-fiber
Special features:
case hardened steel gear wheels
Application bevel gearbox 3 Nm 1:1
The bevel gearboxes are also called reversing gearboxes. Therefore, they are suitable for use wherever movements and forces have to be transmitted at an angle. Exemplary application areas would be in model making, special machine construction or hobby areas.
Deflection 90° l Transmission ratio 1:1 l Max. drive torque 4 Nm l hexagon SW6 l 4 variants axle: without , 50, 80 or 100 mm
Features Deflection gear 3039
Bevel gearbox for the deflection of a rotary motion at a 90° angle. The gearbox can be supplied with a 6kt axis or without an axis. A simple screw mounting allows an uncomplicated assembly. The bevel gearboxes within this product group differ in their projection and can be selected as desired:
3039.00-0001
3039.00-V03A050
3039.00-V03A080
3039.00-V03A100
Throat
Without throat
50mm
80mm
100mm
Special features
Maintenance-free
Case hardened steel bevel wheels
Housing made of reinforced glass-fiber
Suitable for both manual and electric motor drives
Technical data bevel gear box 4 Nm 1:1
Speed range till:
150 rpm
Max. drive torque:
4 Nm
Ratio:
1 : 1
Input/Output:
hex 6mm
Outreach:
without /50 mm / 80 mm / 100 mm
Number of bevel wheels:
2
Dimensions:
30 x 30 x 44 mm
Weight:
70 g - 88 g
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
0°C to 40°C
Housing:
reinforced glass-fiber
Special features:
case-hardened steel bevel wheels
maintenance free
Application bevel gear box 4 Nm 1:1
The bevel gearboxes are suitable for both manual and electric motor drive. They are generally suitable for use wherever movement or forces have to be diverted.
90° deflection l Transmission ratio 1:1 or 2:1 l Max. drive torque 5.5 Nm l hexagonal SW6 l 4 variants axle: without, 50, 80 or 100 mm
Properties deflection gear 3045
This bevel gearbox is suitable for the deflection of a rotary motion at a 90° angle.The gearbox can be supplied with a 6kt axis or without an axis. A simple screw mounting allows an uncomplicated assembly. In addition, the gearbox is maintenance-free and has both hardened steel bevel gears and a housing made of fiberglass-reinforced plastic. The bevel gear unit is suitable for both manual and electric motor drive.
Special features
Maintenance-free
Case hardened steel bevel wheels
Housing made of reinforced glass-fiber
Suitable for both manual and electric motor drives
Max. drive torque:
5,5 Nm
Ratio:
1:1 or 2:1
Speed range till:
150 rpm
Input/Output:
hex 6mm
Outreach:
without / 50mm / 80mm / 100mm
Dimensions:
36 x 36 x 55 mm
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
0 to 40°C
Housing:
reinforced glass-fiber
Special features:
case hardened steel gear wheels
Application bevel gearbox 5.5 Nm 1:1 or 2:1
The bevel gearboxes are suitable for the transmission of forces. Due to its quiet running, the gearbox finds an optimal application even in noise-sensitive areas.
Properties bevel gear 10 Nm 1:1
The bevel gearbox with a max. torque of 10 Nm and a gear ratio of 1:1 is also known as a reversing gearbox. The gearbox has a special toothing, which is responsible for the smooth running of the gearbox. At the same time, the bevel gearbox is characterized by its hardened steel bevel gears with ball bearings and its zinc die-cast housing. The gearbox is maintenance-free.
The gearboxes are selectable in the characteristics of input, output and length of the input.
3872.00-0062
3872.00-0045
3872.00-0039
3872.00-0028
Output
2x Spindle TR 12x3 RH
2x Spindle TR 12x3 RH
2x Spindle TR 12x3 RH
2x Wave Ø 12mm
Drive
Continuous shaft Ø 12mm
Continuous shaft Ø 12mm
inside 6kt SW9
Continuous shaft Ø 12mm
Output length
200mm
350mm
200mm
13,2mm
Special features bevel gear box 10 Nm 1:1
Maintenance-free
Hardened, bearing seated steel gear cogs
Housing made of zinc die-casting
Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C
Technical data bevel gear box 10 Nm 1:1
Speed range till:
150 rpm
Max. drive torque:
10 Nm
Ratio:
1 : 1
Dimensions:
50 x 50 x 50mm
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
-20°C - 40°C
Housing:
zinc die-casting
Special features:
hardened, bearing seated steel gear cogs
Application bevel gearbox 10 Nm 1:1
The bevel gearbox is ideal for use as a transfer gearbox or as an attachment gearbox for electric motors. The application is mostly for blinds and actuators in special machine construction.
Features bevel gearbox 10 Nm 1:1
Our bevel gearboxes with a maximum torque of 10 Nm are used to deflect a rotary motion. The special toothing of the installed gears ensures smooth running of the gearbox. The bevel gearbox is also maintenance-free and consists of hardened steel bevel gears with ball bearings and a die-cast zinc housing.
The bevel gearboxes in this product group differ in terms of input/output and the number of bevel gears:
3870.00-1001
3871.00-1001
3870.00-1002
3871.00-1003
In / Output
hex 6mm
hex 6mm
hex 6mm
hex 6mm
number of bevel gears
2
3
2
3
suitable mounting
Befestigungsflansch für Kegelradgetriebe
Special features
Maintenance-free
Hardened, bearing seated steel gear cogs
Housing made of zinc die-casting
Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C
Speed range till:
150 rpm
Max. drive torque:
10 Nm
Ratio:
1 : 1
Dimensions:
50 x 50 x 50mm
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
-20°C to 40°C
Housing:
zinc die-casting
Special features:
hardened, bearing seated steel gear cogs
Application bevel gearbox 10 Nm 1:1
The bevel gearbox 10 Nm 1:1 is suitable as a transfer gearbox or attachment gearbox for electric motors. These are used, among other things, for blinds and actuators in special machine construction.le as a transfer gearbox or attachment gearbox for electric motors. These are used, among other things, for blinds and actuators in special machine construction.
Transmission ratio 1:1 l Drive torque 10 Nm l Housing made of zinc die-cast l 5 variants 2 ,3 or 4 bevel gearsFeatures bevel gearbox 10 Nm 1:1 with blind hole
Our bevel gearboxes with blind hole are maintenance-free and have special gearing, which ensures smooth running of the gearbox. The gearboxes are suitable for the deflection of a rotary motion and are therefore also known as deflection gearboxes. The bevel gears of the gearbox are hardened and have ball bearings. The housing is made of zinc die casting.
In addition to a selection in the input and output, it is possible to choose between a different number of bevel gears.
3871.00-1002
3872.00-1001
3870.00-1000
3869.00-1000
3872.00-1000
On / Offset
hex 6mm
hex 6mm
hex 7mm
hex 7mm
hex 7mm
Number of bevel gears
3
4
2
3
4
Suitable mounting
Mounting flange for bevel gearbox
Special features
Maintenance-free
Hardened, bearing seated steel gear cogs
Housing made of zinc die-casting
Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C
Technical data bevel gearbox 10 Nm 1:1 with blind hole
Speed range till:
150 U/min
Max. drive torque:
10 Nm
Ratio:
1 : 1
Dimensions:
50 x 50 x 50mm
Self-locking:
no
On/Off duration:
20% (at 5Min.)
Allowable operating temperature:
-20°C to 40°C
Housing:
zinc die-casting
Special features:
hardened, bearing seated steel gear cogs
Application bevel gearbox 10 Nm 1:1 with blind hole
The bevel gearbox is suitable for use in noise-sensitive areas due to its quiet running. It is ideally used as a transfer gearbox or as an attachment gearbox for electric motors and can be found in its application in blinds and actuators in special machine construction.
Max. Load Tensile load 8 kN l Max. Compressive load 5kN l Transmission ratio 1:2 l Drive torque 2.5 Nm l Drive hexagon SW6 l Zinc die castingFeatures bevel gearbox 3057 l 2,5 Nm l 1:2
The bevel gear unit 2.5 Nm 1:2 is also considered a reversing gear unit. It is suitable for deflecting a rotary motion at a 90° angle. This angular gear is ideal for adjusting sunshades. The special toothing ensures smooth running of the gearbox. At the same time, the bevel gearbox is characterized by its hardened steel bevel gears and its zinc die-cast housing. The bevel gearbox is maintenance-free and designed for manual operation.
Technical data bevel gearbox 2,5 Nm 1:2
Translation:
1:2
Drive:
6kt SW6
Output:
6kt SW9
Number of gears:
2
Housing material:
Zinkdruckguss
Max. Drive torque:
2,5 Nm
Max. Tensile load static short-time*
8.000 N
Max. Compressive load static short-time*
5.000 N
Attention: Spindle not included in the scope of delivery. Depending on the spindle used, the self-locking of the system must be checked
Back to the overview
Bevel gearbox for the deflection of a rotary movement at an angle of 90°. Particularly suitable for the adjustment of large parasols. The special bevel gear toothing ensures smooth running of the gearbox. Special featuresMaintenance-freeCase hardened steel bevel wheelsHousing made of zinc die-casingDesigned for manual operationTechnical notesDepending of the spindle pitch the self-locking of the system must be checkedRatio:1:1,5Input:hex 9mmOutput:hex 9mmNumber of bevel wheels2Housing:Zinc die-castingMax. torque:4 NmDimensions:50 x 50 x 84On/Off duration:20% (at 5 Min.)Allowable operating temperature:0 to 40°C
Features bevel gearbox 3 Nm 1:1
The bevel gearbox has a continuous 6kt axis four input and output. The variants of the gearbox vary in their deflection angles.
Technical data bevel gear box unit 3 Nm 1:1
Speed range till:
150 rpm
Max. drive torque:
3 Nm
Ratio:
1: 1
Input/Output:
hex 6mm
Dimensions
See drawing
Allowable operating temperature:
0 to 40°C
Housing:
reinforced glass-fiber
Special features:
through 6kt axiscase hardened steel gear wheels
Application bevel gear 3 Nm 1:1
The bevel gearbox is suitable as a versatile drive solution for use with height-adjustable tables, sunshades, adjustable windows and for any linear adjustments in the industrial sector.
Features bevel gearbox 3 Nm 1:1
Our bevel gearboxes with 3 Nm and a 1:1 ratio are also called reversing gearboxes. Therefore, a selection of different reversing angles is available within this product group:
3025.00-0009
3025.00-0013
3025.00-0083
Deflection angle
90°/270°
90°/90°/180°
90°/90°/90°/90°
The bevel gearboxes consist of bevel gears and bevel pinions have 4 input and output drives. They are used to transmit or redirect torques. The forces are transmitted by case-hardened steel gears. The housing is made of glass fiber reinforced plastic. The reversing gear units are power gear units and are therefore suitable for use in a wide range of applications.
Technical data bevel gearbox 3 Nm 1:1
Speed range till:
150 rpm
Max. drive torque:
3 Nm
Ratio:
1 : 1
Input/Output:
hex 6mm
Rotational direction change:
yes
Allowable operating temperature:
0 to 40 °C
On/Off duration:
20% (at 5Min.)
Housing:
reinforced glass-fiber
Special features:
case hardened steel gear wheels
Application bevel gear box 3 Nm 1:1
This bevel gear box can be used for many different drive solutions. For example, these gears can be found in the height adjustment of tables, sunshades, adjustable windows, etc. as well as any kind of linear adjustment in the industrial sector.
There are different application areas for this bevel gear drive, e.g. in model making, in special machine construction or hobby area – whenever movement comes into play.Speed range till:50 rpmmax. torque:5 NmRatio:1 : 1,5Input:hex 9mm Output:Shaft Ø 12,2mmLength of output: 20mmDimension:60 x 90 x 45 mmWeight:767 gSelflocking:noOn/Off duration:20% (at 5 Min.)Allowable operating temperature:0°C to 40°CHousing:Zinc die-castingSpecial featuresSteel bevel gears, zinc-plated
Properties bevel gearbox 8 Nm 1:1.5
The bevel gearbox with a size of 60x60 mm is maintenance-free and is suitable for deflecting rotary movements at a 90° angle. At the same time, smooth running of the gearbox can be ensured by means of special gearing. The reversing gearbox has hardened steel bevel gears and a housing made of aluminum profile.
The selection of bevel gearboxes varies in their different inputs and outputs as well as in the number of bevel gears:
3875.00-1002
3875.00-0123
Output
inside 6kt SW9
2x Wave Ø 12mm
Drive
inside 6kt SW9
inside 6kt SW9
Number of bevel gears
2 Bevel gears
3 Bevel gears
Special features
Maintenance-free
Hardened, bearing seated steel gear cogs
Housing made of aluminium profile
Dimension 60 x 60 mm
Designed for manual operation
Technical data bevel gear box 8 Nm 1:1.5
Ratio:
1 : 1,5
Max. drive torque:
8 Nm
Housing:
Aluminium profile
Max. tensile load static short term*
7.500 N
Max. pressure load static short term*
9.000 N
Special features:
case-hardened bevel wheels
* Peak load, e.g. caused by gusts of wind
Application bevel gear box 8 Nm 1:1.5
The bevel gearbox offers quiet running due to its special gearing and can therefore be optimally used in noise-sensitive areas. At the same time, the gearbox is suitable for adjusting large sunshades.
€130.90*
This website uses cookies to ensure the best experience possible. More information...