Motor cables & hand switches
Motor cables & hand switches
Ketterer‘s range of accessories off ers a large selection of hand switches in various designs, with or without display, with simple or touch buttons and various motor cables to suit the respective Ketterer drives.
Adapter cable 200mm
€9.65*
Motor connection cable / adapter cable Molex to MASSimilar to Molex Mini-Fit-JR, pitch 4,2mmDual-row, 8 circuits.2x crimp Contacts: 171639-16x crimp Contacts: 170365-1overmold black, outer Jacket black2x AWG18 for PWRA and PWRB5x AWG26, outer Jacket black.DIN 41524, female, outer mold blackAll Parts must be RoHS conform.
Extension cable 1200mm 8 pins 2 plugs
€20.83*
Extension cable length 1200 mm l 2 plugs l Standard cable l JS-1148-08 l JS-1149-08 l for 3133 and 3143 motor l 8 pins
Properties
The motor cable has a length of 1200mm. The cables are extension cables to our 3133 and 3143 motors with 8 pins.
The motor cables have two plugs:
Plug 1: JS-1148-08
Plug 2:JS-1149-08
Cable : 2CxAWG18 and 6CAWG26
Compatibility motor cable 1200mm
As extension cable to the following drives:
3133
DC geared motor
3143
DC geared motor
back to overview
Hand control HSM-OD-2LD Rev 5
€22.97*
Simple up-down hand switch for an easy custom control of your stepless adjustment. The hand switch is characterized by a clear design and an ease of use. You can use it with the Compacteco control as well as with any of our motor drives. For parallel operation of hand controls, you can obtain the appropriate Y-cable from us.Supply voltage5VDC+/- 10%Power consumption (average)0mASwitching current50mALife endurance (Switching cycles)10.000Ambient temperature0 - 50°CCable length1800mm +/- 50mmDimensions (L,W,H)56mm x 66,9mm x 17,8mmWeight0,06kg (incl. cable)The hand switches with touch function need the Compacteco control with firmware version 1.9.For programming and varying of the stroke, a hand switch with display is required.
Hand control HSU-C-FL-LD
€74.02*
Features hand switchThe hand switch HSU-C-FL-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.
Hand switch HSF-MDF-4M4-LD with pull-out mechanism
€79.93*
Features hand switchThe hand switch HSF-MDF-4M4-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.
hand switch Y-cable for parallel operation
€19.75*
Y-cable for parallel operation with a length of 200mm. The terminals are made of brass with a nickel plated surface. The overmold is made of PVC.The cables are free of SVHC and CM. The operating temperature range is between 0°C and 85°C. You can find the suitable hand switch here.
Infrared hand control IRR-DSK-SET-LIGHT
€106.98*
The hand switch is characterized by a clear design and an ease of use. You can use it with the Compacteco control
as well as with any of our motor drives. This remote control consists
of an IR transmitter (incl. battery and holder) and R-receiver. For parallel operation of hand controls, you can obtain the appropriate Y-cable from us.Supply voltage5VDC+/- 10%Power consumption (average)75mALife endurance (Switching cycles)10.000Ambient temperature0 - 50°CCable length2070mm +/- 50mmDimensions (L,W,H)141mm x 129mm x 9,6mmwithout mounting plateWeight0,13kg (incl. cable)The hand switches with touch function need the Compacteco control with firmware version 1.9.For programming and varying of the stroke, a hand switch with display is required.
Motor cable 1750mm Molex 8 pins, AMP 6 pins
€13.01*
Motor cable with a length of 1750mm. The cables are available with or without invert power/sensor. The motor cables have two plugs:Plug 1: identical AMP-172160 6PPlug 2: identical Molex 557-08R210 8P oder plug JS-1149-08For use with the following drives:3130DC Motor drives3120Inline spindle drive3121DC Motor drivesMotor drives3133.48DC MotorDC Motor drives
Motor cable 1950mm or 1000mm with DIN 41524 and AMP connector 8 pins
€13.45*
Motor cable with a length of 1950mm and 1000mm. The cables are available with or without invert power/sensor. The motor cables have two plugs:Plug 1: identical AMP 8PPlug 2: identical DIN 41524 8PFor use with the following drives:as spare part for: 3143.00-1XXX as accessory for: 3143.00-2XXXback to the overview
Motor cable 1950mm or 1000mm, Molex and AMP 8 pins
€10.84*
Motor cable with a length of 1950mm and 1000mm. Particularity: cable Basic S / compact KTS.The motor cables have two plugs:Plug 1: identical Molex 557-08R210 8P or plug JS-1149-08Plug 2: identical AMP Serie HE 14 8PFor use with the following drives:as spare part for: 3143.00-1XXX as accessory for: 3143.00-2XXXback to the overview
Motor cable with 90° connector, with DIN 41524 and AMP connector 8 pins, bend protected
€11.38*
Motor cable with a length of 1950mm.The motor cables have two plugs:Plug 1: (90°) identical AMP 8PPlug 2: identical DIN 41524 8PFor use with the following drives:as spare part for: 3143.00-1XXX as accessory for: 3143.00-2XXX
Radio remote control and transmitter
€86.26*
Features remote control set This remote control consists of a radio transmitter (including battery, holder and fastening screws), radio receiver and operating instructions. This remote control is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. It is characterized by a clear design and ease of use. They can be used with all of our motor drives..Special features
Stepless adjustmentUser-defined and application-oriented control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivesSpecial notes on remote control set
A manual switch with display is always required for programming and changing the stroke on site.
Touch basic hand switch
€23.92*
Features hand switchThe hand switch TOUCH basic-DN manual switch for motor drives has up-down buttons with which the height and the stroke can be set. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives.Special featuresUser-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical adviceThe hand switches with touch function require the Compacteco control with firmware version 1.9.A manual switch with display is always required for programming and changing the stroke on site.
Touch fix hand switch
€71.52*
Features hand switchThe hand switch HSU-C-FL-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.