BLDC Motor t-Rex 3200 digital Ø44 L97
14-pole BLDC motor with neodymium magnets, digital Hall sensors, and plug-in connections. Ideal for various applications.
Stock:
10
Product number:
3200.00-0004
Weight:
0.7 kg
Product information "BLDC Motor t-Rex 3200 digital Ø44 L97 "
- Idle speed up to 4053 1/min
- Max torque 2 Nm
- Rated torque up to 0.3 Nm
- Rated speed up to 3767 1/min
Features BLDC motor t-Rex 3200 I-44-89-L12 S2
14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors for detecting the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. A motor version with hollow shaft is also available on request. This makes it possible to feed the cables through the motor or to realize a double-sided output.
Special features BLDC-Motor 24V l digital l Ø 44mm
- Developed with focus on speed
- Enormous power density - 3 times more powerful than motors of comparable size
- High overload resistance
- Best suited as direct drive or as generator for gearless applications
Technical specifications BLDC-Motor 24V l digital l Ø 44mm
t-Rex 3200 I-44-89 L12 S2 DH | 3200.00-0004 | |
Rated voltage | 24 VDC | 36VDC |
Rated current | 4,0A | 4,0 A |
Rated torque | 0,3 Nm | 0,2 Nm |
Rated speed | 2418 1/min | 3767 1/min |
Shaft power (output) | 67 W | 79 W |
Max. efficiency | 74 % | 76 % |
Idle speed | 2680 1/min | 4053 1/min |
No-load current | 0,55 A | 0,56 A |
Stall torque | 2 Nm | 2 Nm |
Starting current at idle speed | 22,7A | 21,6 A |
Torque constant | 0,09 Nm/A | 0,09 Nm/A |
Speed constant | 112rqm/V | 113rqm/V |
Motor parameters | |
Terminal resistance (phase to phase) | 27 Ohm |
Terminal inductance (phase to phase) | 45 mH |
Rotor inertia | 26,5kg* mm² |
Number of poles | 14 |
Interconnection of the motor | Star |
Number of coils per phase | 2 |
Interconnection of coils | 2 Series |
Direction of rotation | bidirectional |
Note: Max. ambient temperature = 40 °C, controller-specific
At the nominal point (TU = 20°C), controller-specific
Digitale Hall-Sensoren
Supply of sensors: Voltage range: 4.5 to 5.5 V DC, Optional: voltage regulator for 5 V, Input current: < 70 mA
Output signals of sensors: Diff erential output (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA, Output current: max. 20 mA
Signal structure: The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the
Signal frequency is seven times higher than the speed
Supply of sensors: Voltage range: 4.5 to 5.5 V DC, Optional: voltage regulator for 5 V, Input current: < 70 mA
Output signals of sensors: Diff erential output (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA, Output current: max. 20 mA
Signal structure: The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the
Signal frequency is seven times higher than the speed
Login