Our steel trapezoidal threaded spindles are available in a range of diameters and thread types. In addition to standard trapezoidal threads, we also offer customised solutions with special threads. You can choose from threaded spindles in free cutting steel, case-hardened steel or heat-treated steel. Please refer to the product description for the application. We also offer stainless steel spindles.
TR10 l 5 Varianten zur Auswahl l Rechts- und Linksgewinde l ein- oder mehrgängig l Stahl gerollt l Länge 1000mm l DIN 103Characteristics Trapezoidal screws TR 10 and SG 10 - steel
Trapezoidal threaded spindles with a diameter of 10mm available in different thread variants. The range includes trapezoidal threaded spindles (TR) and spindles with special threads (SG). These in turn vary from each other by different thread pitches, gears, and right-hand and left-hand versions:
TR 10x2 (thread pitch 2mm l single thread - right-hand thread).
TR 10x3 (thread pitch 3mm l single thread - left-hand and right-hand thread)
TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread)
SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread)
The trapezoidal thread spindles (TR) are standardized according to DIN 103. The special threads (SG) are adapted to this standard. Both spindle versions are available in different threads. The length is 1 meter for all versions. The spindles are characterized by their high strength and uninterrupted grain and are the result of the rolled manufacturing process. The backlash-free adjustment and readjustment, the long service life, the high surface quality as well as the low friction are further characteristics of our threaded spindles.
You are welcome to complete your drive solution with the appropriate nuts. The nuts are available in different shapes and materials in our store.
13014.14-V01L1000
13010.14-V00L1000
13011.14-V00L1000
13012.14-V00L1000
13030.14-V00L1000
Gewinde
TR 10x2gerolltRechtsgewindeeingängig
TR 10x3gerolltRechtsgewindeeingängig
TR 10x3gerolltLinksgewindeeingängig
TR 10x6 P3gerolltRechtsgewindezweigängig
SG 10x10 P2gerolltRechtsgewindefünfgängig
Länge
1000mm
1000mm
1000mm
1000mm
1000mm
Material
Stahl (C15K)
Stahl (11SMnPb30+C+TE)
Stahl (11SMnPb30+C+TE)
Stahl (11SMnPb30+C+TE)
Stahl (C15K)
Passende Mutter
Rundmutter in POM / Messing
Rundmutter in POM / MessingVierkantmutter in POM
Rundmutter in POM / MessingVierkantmutter in POM
Rundmutter in POM / MessingFlanschmutter in POM / Messing
Rundmutter in POMFlanschmutter in POM
Application Trapezoidal screws TR 10 and SG 10 - Steel
The threaded spindles transmit large axial forces and convert rotary movements into linear ones. They are used in mechanical engineering and serve as drives and positioning units. Furthermore, they can be used as components for travel and positioning.
No suitable spindle? Then it is worth taking a look at our spindle range. There you will find further spindles in different materials and diameters. In addition, the suitable nut can be selected.
TR12 l 12 variants to choose from l Right and left hand thread l Single or multiple threads l Rolled steel l Length 1000mm l DIN 103Features trapezoidal threaded spindles TR 12 and SG 12 - steel
The range of our threaded spindles includes trapezoidal threaded spindles (TR) and spindles with special thread (SG). The spindles have a diameter of 12mm and vary in their thread pitch:
TR 12x2 (thread pitch 2mm l single thread - right hand thread).
TR 12x3 (thread pitch 3mm l single thread - left hand thread and right hand thread)
TR 12x6 P3 (thread pitch 6mm P3 l double thread - left hand and right hand thread)
SG 12x7 P3,5 (thread pitch 7mm P3,5 l double thread - right hand thread)
SG 12x9 P3 (thread pitch 9mm P3 l three-start - right-hand thread)
SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread)
SG 12x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)
SG12x30 P6 (thread pitch 30mmP6 l five-start - left-hand thread and right-hand thread)
SG 12x100 P8,3 (thread pitch 100mm P8,3 l 12-start - right-hand thread)
Our versions with trapezoidal thread (TR) are standardized according to DIN 103. The threaded spindles with special thread (SG) are adapted to this standard. The spindle versions are uniformly available in 1 meter lengths and differ in their thread pitch. The threaded spindles with special thread have a multi-start thread and withstand applications under high loads. The ends of our spindles are sawn and not deburred. Both the trapezoidal threaded spindles and the rods with special threads owe their high strength and uninterrupted grain to the rolled manufacturing process. In addition, a high surface quality, backlash-free adjustment and readjustment, low friction and durability characterize the quality product.
Our store offers you the possibility to combine the spindles with matching nuts in different shapes and materials to use the threaded spindles as an optimal drive solution.
13022.14-V00L1000
13005.14-V01L1000
13006.14-V00L1000
13007.14-V01L1000
13019.14-V00L1000
Thread
TR 12x2rolledRight-hand thread
catchy
TR 12x3rolledRight-hand threadcatchy
TR 12x3rolledLeft-hand threadcatchy
TR 12x6 P3rolledRight-hand threadtwo-course
TR 12x6 P3rolledLeft-hand threadtwo-course
Length
1000mm
1000mm
1000mm
1000mm
1000mm
Material
steel (11SMnPb30+C)
steel (C15K)
steel (11SMnPb30+C+TE)
steel (C15K)
steel (11SMnPb30+C+TE)
fitting nut
Round nut in POM/brass
square nut in POM
Round nut in POM/brass
Round nut in POM/brass
Round nut in POM/brass
square nut in POM
Round nut in POM/brass
square nut in POM
13515.14-V00L1000
13508.14-V00L1000
13024.14-V00L1000
13029.14-V00L1000
13518.14-V00L1000
Gewinde
SG 12x7 P3,5rolledRight-hand threadtwo-course
SG 12x9 P3rolledRight-hand threadthree-course
SG 12x12 P4rolledRight-hand threadthree-course
SG 12x16 P4rolledRight-hand threadfour-course
SG 12x100 P8,3rolledRight-hand threadtwelve-course
Länge
1000mm
1000mm
1000mm
1000mm
1000mm
Material
steel (C15)
steel (11SMnPb30+C+TE)
steel (C15K)
steel (11SMnPb30+C+TE)
steel (C45K)
Passende Mutter
Round nut in POM/brass
square nut in POM/brass
Round nut in POM/brass
square nut in POM/btass
Round nut in POM/brass
square nut in POM/brass
Round nut in POM/brass
square nut in POM/brass
aquare nut in POM
13520.14-V01L1000
13517.14-V00L1000
Gewinde
SG 12x30 P6rolledLeft-hand threadfive-course
SG 12x30 P6rolledRight-hand threadffive-course
Länge
1000mm
1000mm
Material
steel (C15K)
steel (C15K)
Passende Mutter
square nut in POM
Round nut in polyamidsquare nut in POM
Application trapezoidal thread spindles TR 12 and SG 12 - steel
The spindles with trapezoidal thread and special thread are used in mechanical engineering. They are also used as drives and control units or are part of traverse paths and positioning systems. In their application, they transmit large axial forces and convert rotary movements into linear ones.
Are you looking for a spindle with a different diameter or made of a different material? Under the following links you will find further spindle variants and the matching threaded nuts for your drive solution.
TR14 l 8 Varianten zur Auswahl l Rechts- und Linksgewinde l ein- oder mehrgängig l Stahl gerollt l Länge 1000mm l DIN 103Screw-threaded spindle with a trapezoidal thread (TR 14) for high loads due to the plurality of spiral. The spindles are to be used in mechanical engineering, for drives, for adjusting units, for travel distances and for positioning. They are rolled and therefore high-strength compressed. The ends are cut and thus not deburred. Suitable to the trapezoidal spindles, trapezoidal nuts in POM, brass and PA6-GF30, trapezoidal flange nuts in POM and brass as well as trapezoidal square nuts in POM are available in our shop.Diameter14mmExecutionright / leftLength1000mm, 2000mm
TR16 l 3 variants to choose from l Right and left hand thread l Single or multiple threads l Rolled steel l Length 1000mm l DIN 103Properties trapezoidal thread spindles TR 16 - steel
The trapezoidal screws with a diameter of 16mm are available in different thread versions in our store:
TR16x2 (thread pitch 2mm l single thread - left hand thread)
TR16x4 (thread pitch 4mm l single thread - right hand thread)
TR16x8 P4 (thread pitch 8mm P4 l double thread - right hand thread)
All versions are available in the length of 1 meter and are designed for use under high loads. The transmission of large axial forces is also possible thanks to the trapezoidal profile of the spindles. The ends are sawn and not deburred. During the manufacturing process, the threaded rods are rolled. This guarantees an uninterrupted grain and thus higher strength. Furthermore, a high surface quality, a long service life, backlash-free adjustment and readjustment as well as low friction are central characteristics of our trapezoidal thread spindles. By means of the matching trapezoidal thread nuts (round, with flange) in different materials, the spindle functions as an optimal drive solution in different areas.
13105.14-V00L1000
13001.14-V00L1000
13008.14-V00L1000
Thread
TR 16x2rolledLeft-hand threadcatchy
TR 16x4rolledRight-hand threadcatchy
TR 16x8 P4rolledRight-hand threadtwo-course
Length
1000mm
1000mm
1000mm
Material
steel (11SMnPb30+C+TE)
steel (11SMnPb30+C+TE)
steel (C15K)
mutching nut
Round nut in POM / brass
Round nut in POM / brassFlange nut in POM / brass
Round nut in POM / brassFlange nut in POM / brass
Application Trapezoidal screws TR 16 - steel
Trapezoidal screws transmit large axial forces and are used in fastening and clamping applications. The threaded spindles are able to convert rotating movements into linear ones. In addition to applications in mechanical engineering, drives and actuators or even travel and positioning are areas for the use of the threaded rods.
In addition to the present trapezoidal threaded spindles TR 16 in steel, other spindle sizes with matching threaded nuts are available in our store.
TR22x5 l right-hand thread l single-start l steel (11SMnPb30) rolled l length 1000mm l DIN 103 l designed for high loadsProperties trapezoidal threaded spindle TR 22x5 - steel
The trapezoidal threaded spindles have a diameter of 22mm and a thread pitch of 5mm. The spindles are available in 1 meter length. The spindle is characterized by a single-start right-hand thread and its application under high loads. The transmission of large axial forces is possible due to the trapezoidal profile of the spindle. The drive solution owes its high strength and continuous grain to the manufacturing process. The threaded rods are rolled. The ends are then sawn and not deburred. A long service life, high surface quality, backlash-free adjustment and readjustment, and low friction are further special properties of the spindles. For the optimal drive solution, we offer matching trapezoidal leadscrew nuts in our store.
13028.14-V00L1000
Thread
TR 22x5rolledRight-hand thread
catchy
Length
1000mm
Material
steel (11SMnPb30)
Application Trapezoidal Screw TR 22x5 - Steel
In addition to their use in fastening and clamping applications, trapezoidal lead screws help to convert a rotary motion into a linear one. Other applications include mechanical engineering, use in drives and actuators, or travel and positioning.
Besides the present threaded rods TR 22x5 in steel, other spindle sizes with matching threaded nuts are available in our store.
Properties trapezoidal threaded spindle TR 24x5 - steel
The threaded spindles have a diameter of 24mm and a thread pitch of 5mm. The spindles are single thread and available with a length of 1 meter. The ends are sawn and not deburred. By means of a multi-start right-hand thread, an application under high bearing loads can be made. The trapezoidal threaded spindle is considered a drive solution and is capable of transmitting large axial forces due to its trapezoidal profile. Due to the rolled manufacturing process, the spindle has an uninterrupted grain and thus higher strength. Other mechanical properties include a high surface finish, long service life, backlash-free adjustment and readjustment, and low friction of the trapezoidal lead screws. In combination with the matching trapezoidal leadscrew nut, it forms an optimal drive solution in various application areas.
13302.14-V00L1000
Thread
TR 24x5rolledRight-hand threadcatchy
Length
1000mm
Material
steel (C15K)
mutching nut
Square nut in POM
Application Trapezoidal Screw TR 24x5 - Steel
In addition to the transmission of large axial forces, the trapezoidal thread spindles are used in the conversion of a rotating into a linear movement. The spindles are used, among others, in fastening and clamping applications, as well as in mechanical engineering. In addition, drives and actuators or travel and positioning are areas for the use of threaded rods.
In addition to the present trapezoidal threaded spindle TR 24x5 in steel, other spindle sizes with matching threaded nuts are available in our store.
TR8 l 2 versions to choose from l right and left hand thread l single thread l steel (11SMnPb30+C) rolled l length 1000mm l DIN 103Characteristics Trapezoidal thread spindles TR 8x15 - steel
Our spindles with trapezoidal thread are standardized according to DIN 103 and are available in a length of 1 meter. The trapezoidal thread spindle TR 8x1,5 has a diameter of 8mm and a thread pitch of 1,5mm. These threaded spindles TR 8 were manufactured using steel (11SMnPb30+C) and are each available with a right-hand or left-hand thread in our store. This is a single thread with a trapezoidal profile. This allows the transmission of high axial forces. The production is done by a rolled manufacturing process. This gives the spindles higher strength and uninterrupted grain. Other characteristic properties include long service life, low friction, backlash-free adjustment and readjustment, and high surface quality.
You want an optimum drive solution? For this, we offer you the matching nuts to the selected spindle in our store. Choose between different shapes and materials according to your individual idea.
13035.14-V00L1000
13017.14-V00L1000
Thread
TR 8x1,5rolledLeft-hand threadcatchy
TR 8x1,5rolledRight-hand threadecatchy
Length
1000mm
1000mm
Material
steel (11SMnPb30+C)
steel (11SMnPb30+C)
Matching nut
Round nut in POM
Round nut in POM
Application Trapezoidal screws TR 8x15 - steel
The trapezoidal thread spindle is used in many fields. Besides the use in mechanical engineering, it serves as an element of travels and positioning. Its use as a drive and positioning unit is also not mutually exclusive. The conversion of rotating movements into linear motion as well as the transmission of large axial forces are part of the characteristics of the lead screw.
The spindle at hand does not have the right dimensions? Discover even more thread designs in our range as well as our threaded nuts as a complementary unit for your drive solution.
€9.81*
This website uses cookies to ensure the best experience possible. More information...