BLDC Motor t-Rex 3200 I-44-89-L41 S2 digital

From €232.38 *

Prices incl. VAT plus shipping costs

Version:

  • 3200.00-0005-MCA1
Features BLDC motor t-Rex 3200 I-44-89-L41 S2 14-pole BLDC motor with... more
Product information "BLDC Motor t-Rex 3200 I-44-89-L41 S2 digital"

Features BLDC motor t-Rex 3200 I-44-89-L41 S2

14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors to detect the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. The design of the motor with a hollow shaft allows the cables to run through the motor or output on both sides.  

Special features BLDC motor 24V l digital l Ø 44mm

  • Designed withfocus on max. torque
  • Enormous performance density – 3 times stronger than motors of comparable size
  • High overload resistance
  • Ideally suited as direct drive, or generator for gearless applications

Technical specifications BLDC motor 24V l digital l Ø 44mm

t-Rex 3200 I-44-89 L41 S2
3200.00-0005 /3200.00-0006
Rated voltage 24 VDC 36 VDC 48 VDC
Rated current 1,7 A 1,8 A 1,7 A
Rated torque 0,5 Nm 0,5 Nm 0,5 Nm
Rated speed 600 1/min 960 1/min 1347 1/min
Shaft power (output) 31 W 50 W 70 W
Max. efficiency 83 % 83 % 83 %
Idle speed 812 1/min 1221 1/min 1653 1/min
No-load current 0,3 A 0,2 A 0,2 A
Stall torque 1,8 Nm 2,3 Nm 2,9 Nm
Starting current at idle speed 6,6 A 8,7 A 11,2 A
Torque constant 0,279 Nm/A 0,264 Nm/A 0,261 Nm/A
Speed constant 34 rqm/V 34 rqm/V 34 rqm/V
Motor parameters
Terminal resistance (phase to phase) 2,6 Ohm
Terminal inductance (phase to phase) 1,6 mH
Rotor inertia 26,5 kg* mm²
Number of poles 14
Interconnection of the motor Star
Number of coils per phase 2
Interconnection of coils 2 Serie
Direction of rotation bidirectional

Note: Max. ambient temperature = 40 °C, controller-specific
At the nominal point (TU = 20°C), controller-specific

Digital Hall-Sensors
Supply of sensors: Voltage range: 4.5 to 5.5 V DC, Optional: voltage regulator for 5 V, Input current: < 70 mA
Output signals of sensors: Differential output, (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA / Output current: max. 20 mA
Signal structure:The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the
Signal frequency: Is seven times higher than the speed
Related links to "BLDC Motor t-Rex 3200 I-44-89-L41 S2 digital"
Read, write and discuss reviews... more
Customer evaluation for "BLDC Motor t-Rex 3200 I-44-89-L41 S2 digital"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed