t-Rex 3200 I-44-47-L21 S2 (short version, focus rotational speed)
| Quantity | Unit price |
|---|---|
| To 4 |
€290.10*
|
| To 9 |
€270.68*
|
| To 19 |
€251.26*
|
| From 20 |
€231.84*
|
Available in 30 days, delivery time 1-3 days
Product information "t-Rex 3200 I-44-47-L21 S2 (short version, focus rotational speed)"
- Idle speed up to 7778 rpm
- Max torque up to 1.1 Nm
- Rated torque 0.1 Nm
- Rated speed up to 7400 rpm
Features BLDC motor t-Rex 3200 I-44-47-L21 S2
14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors to detect the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. Motor design with a hollow shaft is also available upon request. This allows the cables to run through the motor or the implementation of output on both sides.
Special features
- Designed with focus on rotational speed
- Enormous performance density – 3 times stronger than motors of comparable size
- High overload resistance
- Ideally suited as direct drive, or generator for gearless applications
Technical specifications
| t-Rex 3200 I-44-47 L21 S2 DH |
3200.00-3000
|
|
| Rated voltage | 24 VDC | 36 VDC |
| Rated current | 3,4 A | 2,4 A |
| Rated torque | 0,1 Nm | 0,05 Nm |
| Rated speed | 4600 rpm |
7400 rpm |
| Shaft power (output) | 48 W | 38 W |
| Max. efficiency | 65 % | 71 % |
| Idle speed | 5168 rpm | 7778 rpm |
| No-load current | 1,2 A | 1,3 A |
| Stall torque | 1,1 Nm | 0,9 Nm |
| Starting current at idle speed | 24 A | 18 A |
| Torque constant | 0,047 Nm/A | 0,05 Nm/A |
| Speed constant | 215 rqm/V | 216 rqm/V |
| Motor parameters | |
| Terminal resistance (phase to phase) | 0,29 Ohm |
| Terminal inductance (phase to phase) | 171 µH |
| Rotor inertia | 9,5 kg* mm² |
| Number of poles | 14 |
| Interconnection of the motor | Star |
| Number of coils per phase | 2 |
| Interconnection of coils | 2 Series |
| Direction of rotation | bidirectional |
Note: Max. Ambient temperature = 40°C, controller-specific
At nominal point (Tu=20°C) controller specific
Supply of sensors
Voltage range: 4.5 to 5.5 V DC
Optional: voltage regulator for 5 V
Input current: < 70 mA
Output signals of sensors
Diff erential output
(RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA
Output current: max. 20 mA
Signal structure: The Hall sensors have a 120° phase shift to each other.
Due to the 14-pole design the Signal frequency is seven times higher than the speed.
Login