t-Rex 3206 I-65-51-L36 S2 (short version, focus rotational speed)
Brushless DC motor with digital hall sensors and a diameter of 65mm.
Product number:
3206.00-1000
Product information "t-Rex 3206 I-65-51-L36 S2 (short version, focus rotational speed)"
- Idle speed up to 6054 rpm
- Max. Torque 1.9 Nm
- Rated torque 0.6 Nm
- Rated speed up to 4812 1/min
Features BLDC motor t-Rex 3206 I65-51 L36 S2 DH
14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors to detect the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. The design of the motor with a hollow shaft allows the cables to run through the motor or output on both sides.
Special features
- Designed with focus on rotational speed
- Enormous performance density – 3 times stronger than motors of comparable size
- High overload resistance
- Ideally suited as direct drive, or generator for gearless applications
Technical specifications
t-Rex 3200 I-44-89 L41 S2 |
3206.00-1000 | ||
Rated voltage | 24 VDC | 36 VDC | 48 VDC |
Rated current | 7,3 A | 5,6 A | 1,7 A |
Rated torque | 0,6 Nm | 0,6 Nm | 0,6 Nm |
Rated speed | 2139 1/min | 3208 1/min | 4812 1/min |
Shaft power (output) | 134 W | 201 W | 301 W |
Max. efficiency | 76 % | 77 % | 77 % |
Idle speed | 2680 1/min | 4053 1/min | 6054 1/min |
No-load current | 0,5 A | 0,6 A | 0,6 A |
Stall torque | 1,9 Nm | 1,9 Nm | 1,9 Nm |
Starting current at idle speed | 20 A | 20 A | 20 A |
Torque constant | 0,094 Nm/A | 0,094 Nm/A | 0,094 Nm/A |
Speed constant | 112 rqm/V | 112 rqm/V | 126 rqm/V |
Motor parameters | |
Terminal resistance (phase to phase) | 0,348 Ohm |
Terminal inductance (phase to phase) | 0,36 mH |
Rotor inertia | 65 kg* mm² |
Number of poles | 14 |
Interconnection of the motor | Star |
Number of coils per phase | 2 |
Interconnection of coils | 2 Serie |
Direction of rotation | bidirectional |
Note: Max. ambient temperature = 40 °C, controller-specific
At the nominal point (TU = 20°C), controller-specific
Supply of sensors: Voltage range: 4.5 to 5.5 V DC, Optional: voltage regulator for 5 V, Input current: < 70 mA
Output signals of sensors: Differential output, (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA / Output current: max. 20 mA
Signal structure:The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the signal frequency is seven times higher than the speed.
Downloads "t-Rex 3206 I-65-51-L36 S2 (short version, focus rotational speed)"
Login