Bevel gear with syncronous telescopicspindle 4115.00
Double telescopic lifting unit with synchronised telescopic spindle: selectable gear head, double speed.
Product number:
4115.00-V03E485M420
Product information "Bevel gear with syncronous telescopicspindle 4115.00"
Stroke 656mm l Gear ratio 1:1 or 1:2 l Travel 20mm/rev, 40mm/rev and 80mm/rev l Drive hexagon SW 6 or SW 7 l Installation dimension 485mm
Features
Double telescopic lifting unit with bevel gear head for various linear drive solutions. The synchronised telescopic design guarantees double speed. The lifting units are available with either the 3039 or 3045 gear head. Both bevel gearboxes are also available individually in our shop.
Special features
- Maximum stroke with minimum installation dimension
- With gear head 3039 or 3045 (included in delivery)
- Gear ratio 1:1 or 1:2
- Max. Max. drive torque at gear head: 4 Nm or 5.5 Nm
- Hardened steel bevel gears with robust, reinforced teeth
- Ideally suited for an electric motor drive
Technical information
- The lifting units must be protected against the effects of lateral forces by a separate guide system.
- Spindle type SG20x10P2 RH and SG10x10P2 RH
- Travel 20/40/80 mm/revolution, synchronised spindle movement
- Installation dimension E: 485 mm
- Stroke: 656 mm
- Required drive torque: 3.5 Nm
- Attention: Spindle systems with a spindle pitch > 3 mm may no longer be self-locking. Self-locking must be checked in the application.
- The lifting unit is only tested for pressure.
- Incorrect dimensioning of the guide system can lead to damage to the lifting unit: Please observe the design and safety instructions for spindle drives. These can be found at: https://www.ketterer.de/downloads/anleitungen
| Series | 4115.00-V01E485M420 | 4115.00-V11E485M420 | 4115.00-V04E485M420 | 4115.00-V14E485M420 | 4115.00-V03E485M420 |
| Gear head | 3045 | 3045 | 3045 | 3045 | 3045 |
| Translation i | 1:1 | 1:1 | 1:1 | 1:1 | 1:2 |
| Drive | 6ktSW7 | 6ktSW7 | 6ktSW6 | 6ktSW6 | 6ktSW7 |
| Max. Drive torque per gearbox | 5,5 Nm | 5,5 Nm | 5,5 Nm | 5,5 Nm | 5,5 Nm |
| Max. Load | 90 kg | 50 kg | 90 Kg | 50 kg | 40 kg |
| Required drive torque | 4,5 Nm | 5,5 Nm | 4,5 Nm | 5,5 Nm | 4,5 Nm |
| Traverse path / revolution (synchronous spindle movement) | 20 mm/U | 40 mm/U | 20 mm/U | 40 mm/U | 40 mm/U |
| Spindle type | SG20x10P2 SG10x10P2 |
SG20x20P2 SG10x20P2 |
SG20x10P2 SG10x10P2 |
SG20x20P2 SG10x20P2 |
SG20x10P2 SG10x10P2 |
| Series | 4115.00-V13E485M420 | 4115.00-V05E485M420 | 4115.00-V15E485M420 | 4115.00-V02E485M420 | 4115.00-V12E485M420 |
| Gear head | 3045 | 3045 | 3045 | 3039 | 3039 |
| Translation i | 1:2 | 1:2 | 1:2 | 1:1 | 1:1 |
| Drive | 6ktSW7 | 6ktSW6 | 6ktSW6 | 6ktSW6 | 6ktSW6 |
| Max. Drive torque per gearbox | 5,5 Nm | 5,5 Nm | 5,5 Nm | 4 Nm | 4 Nm |
| Max. Load | 25 kg | 40 kg | 25 Kg | 80 kg | 40 kg |
| Required drive torque | 5,5 Nm | 4,5 Nm | 5,5 Nm | 4 Nm | 4 Nm |
| Traverse path / revolution (synchronous spindle movement) | 80 mm/U | 40 mm/U | 80 mm/U | 20 mm/U | 40 mm/U |
| Spindle type | SG20x20P2 SG10x20P2 |
SG20x10P2 SG10x10P2 |
SG20x20P2 SG10x20P2 |
SG20x10P2 SG10x10P2 |
SG20x20P2 SG10x20P2 |
Application Bevel gearbox with synchronised telescopic spindle
The bevel gearbox with synchronised telescopic spindle is ideal for electric motorised sit/stand workstation applications or wherever stepless linear adjustment with a high speed, maximum stroke and minimum installation dimensions is required.
Login