The base plate is fitted with sturdy transport wheels to allow versatile positioning of the bike repair stand. The base plate can be easily and securely mounted under the bike repair stand.

The elevation with crossbar is used for hanging tools.

Using the foot switch, the bike can be raised to the desired height (maximum stroke: 1,638 mm) at a speed of 80 mm per second. Pin assignment: Lumberg plug WSV M16 DIN plug 3-pin PIN Cable colour Function 1 brown "down" button 2 red "up" button 3 black common

Using the industrial hand control, the bike can be moved to the desired height (maximum stroke: 1,638 mm) at a speed of 80 mm per second. Pin assignment: Lumberg plug WSV M16 DIN plug 3-pin PIN Cable colour Function 1 black "down" button 2 yellow "up" button 3 green common 4 white not assigned

with base plate 60x60cm | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.915 mm Total stroke 1.455 mm Position of the bicycle clamp 435 to 1.890 mm Fixing clamp Feedback Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years FEEDBACK fixing clamp • Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.890 mm Total stroke 1.455 mm Position of the bicycle clamp 410 to 1.865 mm Fixing clamp Feedback Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years FEEDBACK fixing clamp • Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.890 mm Total stroke 1.455 mm Position of the bicycle clamp 410 to 1.865 mm Fixing clamp Park-Tool Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years Park-Tool fixing clamp • Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.915 mm Total stroke 1.455 mm Position of the bicycle clamp 435 to 1.890 mm Fixing clamp Park-Tool Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years Park-Tool fixing clamp • Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.890 mm Total stroke 1.455 mm Position of the bicycle clamp 410 to 1.865 mm Fixing clamp TIP-TOP Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years TIP-TOP 3-point fixing clamp • Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.890 mm Total stroke 1.455 mm Position of the bicycle clamp 410 to 1.865 mm Fixing clamp VAR Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years VAR fixing clamp • Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.915 mm Total stroke 1.455 mm Position of the bicycle clamp 435 to 1.890 mm Fixing clamp VAR Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years VAR fixing clamp • Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate l incl. safety flange | with quick release | for 360° rotation Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "FEEDBACK" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.815 mm Total stroke 1.635 mm Position of the bicycle clamp 410 to 1.875 mm Fixing clamp Feedback Lifetime 10,000 cycles Warranty 2 years FEEDBACK fixing clamp • Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate 60x60cm | incl. safety flange | with quick release clamp | for 360° rotation Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.840 mm Total stroke 1.465 mm Position of the bicycle clamp 435 to 1.900 mm Fixing clamp Feedback Lifetime 10,000 cycles Warranty 2 years FEEDBACK fixing clamp • Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate | incl. flange Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.815 mm Total stroke 1.635 mm Position of the bicycle clamp 410 to 1.875 mm Fixing clamp Park-Tool Lifetime 10,000 cycles Warranty 2 years Park-Tool fixing clamp • Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate 60x60cm | incl. flange Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.840 mm Total stroke 1.465 mm Position of the bicycle clamp 435 to 1.900 mm Fixing clamp Park-Tool Lifetime 10,000 cycles Warranty 2 years Park-Tool fixing clamp • Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate l incl. mounting material Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.815 mm Total stroke 1.635 mm Position of the bicycle clamp 410 to 1.875 mm Fixing clamp TIP-TOP Lifetime 10,000 cycles Warranty 2 years TIP-TOP 3-point fixing clamp • Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate 60x60cm | incl. mounting material Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.840 mm Total stroke 1.465 mm Position of the bicycle clamp 435 to 1.900 mm Fixing clamp TIP-TOP Lifetime 10,000 cycles Warranty 2 years TIP-TOP 3-point fixing clamp • Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

without base plate l incl. safety flange | with quick release | for 360° rotation Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.815 mm Total stroke 1.635 mm Position of the bicycle clamp 410 to 1.875 mm Fixing clamp VAR Lifetime 10,000 cycles Warranty 2 years VAR fixing clamp • Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate 60x60cm | incl. safety flange | with quick release clamp | for 360° rotation Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 2,2mm/U Total height ca. 1.840 mm Total stroke 1.465 mm Position of the bicycle clamp 435 to 1.900 mm Fixing clamp VAR Lifetime 10,000 cycles Warranty 2 years VAR fixing clamp • Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. A gallows for hanging tools and a storage table for laptop are available as accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

with base plate | incl. hand switch l 2x 230V power outlets  l 2x USB ports l 2x compressed air connections Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange.                                                      other variants                               Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops. Highlights • Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years Load 50 kg in continuous operation Speed 80mm/sek. Total height ca. 1.915 mm Total stroke 1.455 mm Position of the bicycle clamp 435 to 1.890 mm Fixing clamp TIP-TOP Manual switch Industrial handset (up & down) Power connection 230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m Lifetime 10,000 cycles Warranty 2 years TIP-TOP 3-point fixing clamp • Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg. Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations. Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button. The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied. With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories. For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.

Maximum front loading up to 80kg   | manually adjustable working height  |  maintenance-free | transport wheels for mobile use  The manual lifting device KET-LIFT4BOX is a compact, powerful, and easy-to-operate solution for efficiently lifting KLT containers, blisters, or other industrial containers in warehouses, workshops, and production facilities. KET-LIFT4BOX is perfect for heavy loads in demanding environments. Thanks to its manual lifting function and ergonomic design, it relieves workers and shortens the reach. It is thus the ideal assistant for improved material provision and a healthier, more productive work environment.  Key Features Suitable for front loading up to 80 kg  High stability thanks to solid base plate Transport wheels for mobile use Ergonomic working thanks to continuous manual container positioning via power drill on the column  Maintenance-free Technical Data Maximum load capacity approx. 80 kg Dimensions (W x D x H) 560 x 640 x 1,125 mm Working height 100 to 925 mm Total adjustment path 825 mm Own weight approx. 55 kg Operation via power drill on the column  Transport wheels Scope of Delivery Steel lifting column Crate holder (aluminum crossbeam and two clamps)

Maximum front loading up to 100kg  |  Adjustment speed 20mm/s  |  Adjustable working height  |  Maintenance-free | Transport wheels for mobile use  The electric lifting device KET-LIFT4BOX is a compact, powerful, and easy-to-operate solution for efficient lifting of KLT containers, blisters, or other industrial containers in warehouses, workshops, and production facilities. KET-LIFT4BOX is perfect for heavy loads in demanding environments. Thanks to its electric lifting function and ergonomic design, it relieves employees and shortens reach distances. It is thus the ideal helper for improved material provision and a healthier, more productive work environment.  Key Features Suitable for front loading up to 100 kg  High stability due to solid base plate Transport wheels for mobile use Ergonomic operation thanks to continuous electric container positioning via push-button on the column or automatic operation with light barrier Top power connection Maintenance-free Technical Data Maximum load capacity approx. 100 kg Adjustment speed 20 mm/s Dimensions (W x D x H) 560 x 640 x 1,125 mm Working height 100 to 925 mm Total adjustment path 825 mm Own weight approx. 55 kg Operation via push-button on the column or in automatic mode Optional with loading and unloading function, transport wheels Scope of Delivery

Maximum front loading up to 200kg  |  Adjustment speed 10mm/s  |  Adjustable working height  |  Maintenance-free | Transport wheels for mobile use  The electric lifting device KET-LIFT4BOX is a compact, powerful, and easy-to-operate solution for the efficient lifting of KLT containers, blisters, or other industrial containers in warehouses, workshops, and production facilities. KET-LIFT4BOX is perfect for heavy loads in demanding environments. Thanks to its electric lifting function and ergonomic design, it relieves employees and shortens reach distances. It is therefore the ideal assistant for improved material provisioning and a healthier, more productive work environment.  Key Features Suitable for front loading up to 200 kg  High stability thanks to solid base plate Transport wheels for mobile use Ergonomic work due to continuous electric container positioning via push-button on the column or automatic operation with light barrier Top power connection Maintenance-free Technical Data Maximum load capacity approx. 200 kg Adjustment speed 10 mm/s Dimensions (W x D x H) 560 x 640 x 1,125 mm Working height 100 to 925 mm Total adjustment path 825 mm Own weight approx. 55 kg Operation via push-button on the column or in automatic mode Optional with loading and unloading function, transport wheels Scope of Delivery Steel lifting column Crate holder (aluminum crossbeam and two clamps)

Mounting plate 1 m x 0.6 m   | manually adjustable working height  |  maintenance-free | transport wheels for mobile use  The manual lifting device KET-LIFT4BOX is a compact, powerful, and easy-to-operate solution for efficiently lifting KLT containers, blisters, or other industrial containers in warehouses, workshops, and production facilities. KET-LIFT4BOX is perfect for heavy loads in demanding environments. Thanks to its manual lifting function and ergonomic design, it relieves workers and shortens the reach. It is thus the ideal assistant for improved material provision and a healthier, more productive work environment.  Key Features Suitable for front loading up to 80 kg  High stability thanks to solid base plate Transport wheels for mobile use Ergonomic working thanks to continuous manual container positioning via power drill on the column  Maintenance-free Technical Data Maximum load capacity approx. 80 kg Dimensions (W x D x H) 560 x 640 x 1,125 mm Working height 100 to 925 mm Total adjustment path 825 mm Own weight approx. 55 kg Operation via power drill on the column  Transport wheels Scope of Delivery Steel lifting column Mounting plate 1 m x 0.6 m