t-Rex 3200 I-44-47-L41 S2 (short version, focus on torque)

BLDC motor with neodymium magnets and three digital Hall sensors for rotor position detection.

€273.70*

Available, delivery time: 1-3 days

Stock: 8
Product number: 3200.00-3000
Weight: 0.37 kg
Product information "t-Rex 3200 I-44-47-L41 S2 (short version, focus on torque)"
  • Idle speed up to 5483 rpm
  • Max torque up to 1.5 Nm
  • Rated torque 0.2 Nm
  • Rated speed up to 4437 rpm


Features BLDC motor t-Rex 3200 I-44-47-L41 S2

14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors to detect the rotor position. The electrical connections are designed as a plug-in system. Additional power electronics are required to operate the motor. Motor design with a hollow shaft is also available upon request. This allows the cables to run through the motor or the implementation of output on both sides.


Special features

  • Designed with focus on rotational speed
  • Enormous performance density – 3 times stronger than motors of comparable size
  • High overload resistance
  • Ideally suited as direct drive, or generator for gearless applications

 

Technical specifications


t-Rex 3200 I-44-47 L41 S2 DH 3200.00-3000
Rated voltage 24 VDC 36 VDC 48 VDC
Rated current 2,6A 2,6 A 2,8 A
Rated torque 0,3 Nm 0,2 Nm 0,2 Nm
Rated speed 2000 1/min 3187 1/min 4437 1/min
Shaft power (output) 42 W 67 W 93W
Max. efficiency 70 % 72 % 72 %
Idle speed 2702 1/min 4089 1/min 5483 1/min
No-load current 0,4 A 0,4 A 0,4 A
Stall torque 1,0 Nm 1,3 Nm 1,5 Nm
Starting current at idle speed 14 A 18 A 20 A
Torque constant 0,077 Nm/A 0,073 Nm/A 0,073 Nm/A
Speed constant 113 rqm/V 114 rqm/V 114 rqm/V


Motor parameters
Terminal resistance (phase to phase) 1,09 Ohm
Terminal inductance (phase to phase) 98 µH
Rotor inertia 125 kg* mm²
Number of poles 14
Interconnection of the motor Star
Number of coils per phase 2
Interconnection of coils 2 Series
Direction of rotation bidirectional


Note: Max. Ambient temperature = 40°C, controller-specific

At nominal point (Tu=20°C) controller specific


Digital Hall-sensors

Supply of sensors
Voltage range: 4.5 to 5.5 V DC
Optional: voltage regulator for 5 V
Input current: < 70 mA

Output signals of sensors
Diff erential output
(RS422 standard, datasheet AM26 C31-TI)

Typical voltage range: 0.2/ 3.4 V @ 20 mA
Output current: max. 20 mA

Signal structure: The Hall sensors have a 120° phase shift to each other.
Due to the 14-pole design the Signal frequency is seven times higher than the speed.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.