Motor drive for through going spindle 4778
24V DC motor with worm gear for push/pull, non-rotating spindle - safe control with Hall sensors.
Stock:
19
Product number:
4778.00-0002
Weight:
1.78 kg
Product information "Motor drive for through going spindle 4778"
Idle speed 270 rpm l Traversing speed 12-45 mm/s l For push and pull movements l Powerful 24 V DC motor with worm gear unit
Features
Powerful 24 V DC motor with worm gear, designed for non-rotating through-spindle for push and pull movements.
A cable with AMP connector and integrated Hall sensors allow simple and safe control of the entire system.
Special features
- Two integrated Hall sensors for detecting rotations and the direction of rotation
- Various types of internal thread for continuous spindle
- Good self-locking properties
- Fast and powerful
- Spindle must be ordered separately
Series | 4778.00-0002 | 4778.00-0004 | 4778.00-0006 |
Drive motor | DC Motor 24 V | DC Motor 24 V | DC Motor 24 V |
Sensor / supply | Hall/5 V DC/0,3 A | Hall/5 V DC/0,3 A | Hall/5 V DC/0,3 A |
Protection class | IP30 | IP30 | IP30 |
Operating temperature | 0° bis +30° | 0° bis +30° | 0° bis +30° |
Electric current (IN) at max. load | 8 A | 8 A | 8 A |
Idle running speed | 270 U/min | 270 U/min | 270 U/min |
Duty cycle idle speed | 20% (bei 5 Min.) | 20% (bei 5 Min.) | 20% (bei 5 Min.) |
Duty cycle at max. load | 10 s ON 240 s OFF | 13 s ON 240 s OFF | 8 s ON 240 s OFF |
Max. lifting force* | 1900 N | 3700 N | 950 N |
Traverse speed (constant from F= 0 bis Fmax.)** |
24mm / s | 12 mm / s | 45 mm / s |
Static Self locking *** | 200 kg | 380 kg | 200 kg |
Output (Inner thread) | SG16x8P4 RH | Tr16x4 RH | SG14x16P4 RH |
* Determined for service life of 10,000 double strokes
** The controller regulates the system in such a way that the travel speed in the entire drive working range is kept as constant as possible
*** In combination with controller, which has a short circuit brake
** The controller regulates the system in such a way that the travel speed in the entire drive working range is kept as constant as possible
*** In combination with controller, which has a short circuit brake
Technical information
- The spindle is not included in the scope of delivery and must be ordered separately
- Attention: It is essential to observe the correct installation position (see installation example).
- The drive must be protected against the effects of lateral forces by a separate guide system.
- The operating range of the drive (rated torque) is determined for a service life of 10,000 double strokes.
- The holding torque of the drive can be increased by using a control unit with a short-circuit brake.
Downloads "Motor drive for through going spindle 4778"
Login