DC-Motor drive 3143
€61.29*
Available, delivery time: 1-3 days
Powerful DC motor with worm gear and a continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields. A cable with AMP plug and an integrated Hall-sensor allows an easy and secure control of the entire system.
For extension/spare part the following cables are available in different lengths:
- Motor cable in 1950mm or 1000mm / with or without invert power/sensors
- Motor cable in 1950mm / with 90° plug
- Motor cable in 1950mm or 1000mm / Compact KTS
Special features
- Two integrated Hall-sensors for measurement of the revolutions and direction of rotation
- Through going hexagon socket in wrench widths 6 mm, 7 mm, 9 mm
- Available as “power package” or as “high speed” variant
- 1000 mm motor cable with connector included
- Good self-locking properties
- Can be combined with all Ketterer spindle systems
Technical notes
- The drives working range (nominal torque) is determined for a service life of 10.000 double strokes.
- Through the controller* the system is regulated such that the speed in the entire drive working range is kept as constant as possible.
- By using a controller with a short-circuit brake the holding torque position of the drive can be increased.
* In combination with LogicData control box Compact-3
| Model | 3143.00-2002 | 3143.00-2003 | 3143.00-2012 | 3143.00-2013 |
| Operating voltage | 6 - 30 V | 6 - 30 V | 6 - 30 V | 6 - 30 V |
| Rated voltage | 24 V | 24 V | 24 V | 24 V |
| Sensor/Power supply | Hall/5 V DC/0,3 A | Hall/5 V DC/0,3 A | Hall/5 V DC/0,3 A | Hall/5 V DC/0,3 A |
| Electric current | 5,5 A at 5 Nm | 5,5 A at 5 Nm | 4,2 A at 2,8 N | 4,2 A at 2,8 Nm |
| Protection class | IP30 | IP30 | IP30 | IP30 |
| Idle running speed | 115 rpm (24 V) 120 rpm* | 115 rpm (24 V) 120 rpm* | 230 rpm (24 V) 240 rpm* | 230 rpm (24 V) 240 rpm* |
| Duty cycle idle speed | 20% (at 5 Min.) | 20% (at 5 Min.) | 20% (at 5 Min.) | 20% (at 5 Min.) |
| Rated torque* | 5 Nm | 5 Nm | 2,8 Nm | 2,8 Nm |
| Duty cycle nominal load** | 20 s ON 240 s OFF | 20 s ON 240 s OFF | 20 s ON 240 s OFF | 20 s ON 240 s OFF |
| Short term peak torque (<1s) | 9 Nm | 9 Nm | 5 Nm | 5 Nm |
| Input | hex 6mm | hex 7mm | hex 6mm | hex 7mm |
* In combination with LogicData control box Compact-3
** Load determined for service life of 10.000 double strokes
Login