without base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.890 mm
Total stroke
1.455 mm
Position of the bicycle clamp
410 to 1.865 mm
Fixing clamp
Feedback
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
FEEDBACK fixing clamp
• Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate 60x60cm | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.915 mm
Total stroke
1.455 mm
Position of the bicycle clamp
435 to 1.890 mm
Fixing clamp
Feedback
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
FEEDBACK fixing clamp
• Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.890 mm
Total stroke
1.455 mm
Position of the bicycle clamp
410 to 1.865 mm
Fixing clamp
VAR
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
VAR fixing clamp
• Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.915 mm
Total stroke
1.455 mm
Position of the bicycle clamp
435 to 1.890 mm
Fixing clamp
VAR
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
VAR fixing clamp
• Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.890 mm
Total stroke
1.455 mm
Position of the bicycle clamp
410 to 1.865 mm
Fixing clamp
TIP-TOP
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
TIP-TOP 3-point fixing clamp
• Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.915 mm
Total stroke
1.455 mm
Position of the bicycle clamp
435 to 1.890 mm
Fixing clamp
TIP-TOP
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
TIP-TOP 3-point fixing clamp
• Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.890 mm
Total stroke
1.455 mm
Position of the bicycle clamp
410 to 1.865 mm
Fixing clamp
Park-Tool
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
Park-Tool fixing clamp
• Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate | incl. hand switch l 2x 230V power outlets l 2x USB ports l 2x compressed air connections
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column with two Schuko sockets, one USB socket and one compressed air connection NW7.2• Crossbar with two different snap hooks• Steel tool tray for laptop and small parts• hand switch• Air switch 2-fold• Two separate 230V power outlets and two USB ports• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
80mm/sek.
Total height
ca. 1.915 mm
Total stroke
1.455 mm
Position of the bicycle clamp
435 to 1.890 mm
Fixing clamp
Park-Tool
Manual switch
Industrial handset (up & down)
Power connection
230V, hard-wired from above with Schuko plug (industrial standard), cable length 3.5 m
Lifetime
10,000 cycles
Warranty
2 years
Park-Tool fixing clamp
• Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
With the 230 V socket at working height, the two USB sockets directly above it and an air pressure connection also at working height, all connections are available in the right place. A gallows for hanging tools and a storage table for laptops are available in our accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate l incl. safety flange | with quick release | for 360° rotation
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "FEEDBACK" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.815 mm
Total stroke
1.635 mm
Position of the bicycle clamp
410 to 1.875 mm
Fixing clamp
Feedback
Lifetime
10,000 cycles
Warranty
2 years
FEEDBACK fixing clamp
• Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate 60x60cm | incl. safety flange | with quick release clamp | for 360° rotation
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.840 mm
Total stroke
1.465 mm
Position of the bicycle clamp
435 to 1.900 mm
Fixing clamp
Feedback
Lifetime
10,000 cycles
Warranty
2 years
FEEDBACK fixing clamp
• Designed for 19 to 48 mm diameter pipes• Rotates 360• Ratchet locking mechanism allows precise adjustment of clamping pressure• Clamping jaws are suitable for frames with difficult clamping areas and provide a secure hold
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate l incl. safety flange | with quick release | for 360° rotation
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.815 mm
Total stroke
1.635 mm
Position of the bicycle clamp
410 to 1.875 mm
Fixing clamp
VAR
Lifetime
10,000 cycles
Warranty
2 years
VAR fixing clamp
• Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate 60x60cm | incl. safety flange | with quick release clamp | for 360° rotation
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "VAR" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.840 mm
Total stroke
1.465 mm
Position of the bicycle clamp
435 to 1.900 mm
Fixing clamp
VAR
Lifetime
10,000 cycles
Warranty
2 years
VAR fixing clamp
• Designed for tubes or profiles up to 80mm diameter• Micro-adjustable with lever• High friction of rubber jaws reduces clamping force on delicate tubes
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate l incl. mounting material
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.815 mm
Total stroke
1.635 mm
Position of the bicycle clamp
410 to 1.875 mm
Fixing clamp
TIP-TOP
Lifetime
10,000 cycles
Warranty
2 years
TIP-TOP 3-point fixing clamp
• Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate 60x60cm | incl. mounting material
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "TIP-TOP" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.840 mm
Total stroke
1.465 mm
Position of the bicycle clamp
435 to 1.900 mm
Fixing clamp
TIP-TOP
Lifetime
10,000 cycles
Warranty
2 years
TIP-TOP 3-point fixing clamp
• Clamping system for fragile carbon or aluminium frames• Bottom bracket pin included• 2 edge protectors• Eccentric clamping lever• 2 star grips with sliding blocks and rubber
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
without base plate | incl. flange
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp " FEEDBACK" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.815 mm
Total stroke
1.635 mm
Position of the bicycle clamp
410 to 1.875 mm
Fixing clamp
Park-Tool
Lifetime
10,000 cycles
Warranty
2 years
Park-Tool fixing clamp
• Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
with base plate 60x60cm | incl. flange
Electric bicycle mounting stand KET-LIFT4BIKE including mounting clamp "Park-Tool" and flange. other variants
Electric bicycle assembly stand KET-LIFT4BIKE - Developed, designed and built in Germany for professional use in bicycle workshops, service facilities and bicycle rental stations as well as in hobby workshops.
Highlights
• Designed and produced in southern Germany• Suitable for all bicycles (especially for e-bikes)• Mobile use possible• Individual, ergonomic work via infinitely variable height adjustment• High stability• Steel lifting column• Individually adaptable to customer requirements• Maintenance-free• Proven drive system for over 40 years
Load
50 kg in continuous operation
Speed
2,2mm/U
Total height
ca. 1.840 mm
Total stroke
1.465 mm
Position of the bicycle clamp
435 to 1.900 mm
Fixing clamp
Park-Tool
Lifetime
10,000 cycles
Warranty
2 years
Park-Tool fixing clamp
• Designed for tubes from 23 to 76 mm diameter• Infinitely adjustable through 360• Fully adjustable clamping pressure• Narrow jaws for secure clamping in hard-to-reach areas
The Ketterer Ket-Lift4Bike bicycle stand is an electrically adjustable assembly stand for bicycles up to 50 kg.
Designed and built in Germany for professional daily use in bicycle workshops, service facilities and bicycle rental stations.
Therefore also ideal for hobby use, for all those who regularly maintain their bikes at home and do not want to do without the comfort and ergonomics of a professional set-up in your workshop, garage or elsewhere. For all those who also do their own work on their e-bike. No matter whether the brakes need to be bled higher up or the sprocket on the motor needs to be changed in the tilted position, with the Ket-Lift4Bike you always mount at the ergonomically correct height and get there quickly at the touch of a button.
The 40 kg large base plate provides support for every use, is flat and therefore not a tripping hazard. The bike stand with base plate can easily be moved to any other location. For this purpose, we have equipped it with sturdy castors and 2 grab handles. If you prefer a fixed location, simply order the bike stand without a base plate. The bike stand is then fixed directly into your foundation with the anchor bolts supplied.
A gallows for hanging tools and a storage table for laptop are available as accessories.
For more information and a comprehensive FAQ list about our bike assembly stand, please visit the KET-LIFT4BIKE website.
The base plate is fitted with sturdy transport wheels to allow versatile positioning of the bike repair stand. The base plate can be easily and securely mounted under the bike repair stand.
Using the industrial hand control, the bike can be moved to the desired height (maximum stroke: 1,638 mm) at a speed of 80 mm per second.
Pin assignment:
Lumberg plug WSV M16 DIN plug 3-pin
PIN
Cable colour
Function
1
black
"down" button
2
yellow
"up" button
3
green
common
4
white
not assigned
Using the foot switch, the bike can be raised to the desired height (maximum stroke: 1,638 mm) at a speed of 80 mm per second.
Pin assignment:
Lumberg plug WSV M16 DIN plug 3-pin
PIN
Cable colour
Function
1
brown
"down" button
2
red
"up" button
3
black
common
The
tool tray for utensils and laptop is attached directly to a swivel arm.
The swivel arm with the tool tray can be easily attached to the bike
mounting stand. Technical specifications Material Stahlblech Width 420 mm Depth 300 mm Height 20 mm Net weight 6,73 kg Maximum load capacity 5 kg
€285.60*
This website uses cookies to ensure the best experience possible. More information...