7 reduction ratios from 1 : 1 to 65 : 1 l Anodised aluminium housing l With keyway 12 mm / 4 mm l Centre distance 15 mm  Worm gear reducer Ket Motion 2015 Universally applicable and maintenance-free worm gearbox with an axial distance of 15 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 15 mm Input and Output: Drive: 6mm / 2mm key Backlash on the drive shaft: 1° +/- 0,5° Type: Worm made of case-hardened steel Worm wheel made of special brass with high wear resistance. Maintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 40 x 40 x 30 mm   Technical specifications worm gear 1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Max.drive torquw M in Nm* Drive side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2015.00-S0PR47 47 : 1 yes 100/500/1000 1,7/1,4/1,2 0,11/0,09/0,08 200 200 34 2015.00-S0PR40 40 : 1 yes 100/500/1000 1,7/1,6/1,5 0,15/0,14/0,13 150 150 29 2015.00-S0PR30 30 : 1 no 100/500/1000 2,6/2,3/2,0 0,2/0,18/0,16 100 100 43 2015.00-S0PR18 18 : 1 no 100/500/1000 2,8/2,5/2,3 0,37/0,33/0,3 50 50 42 2015.00-S0PR12 12 : 1 no 100/500/1000 3,0/2,8/2,5 0,56/0,52/0,46 50 50 45 2015.00-S0PR05 5 : 1 no 100/500/1000 2,7/2,6/2,4 0,89/0,85/0,79 50 50 61 2015.00-S0PR01 1 : 1 no 100/500/1000 1,0/0,6/0,3 1,28/0,77/0,38 50 50 78 * Short-term peak load <1s Axial load on the output side 500 Nm Worm gearbox application 47:1 - 1:1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.

9 reduction ratios from 1:1 to 65:1 l material-saving zinc housing l with keyway 12mm/4mm l centre distance 20mm  Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox unit in one size with a centre distance of 20 mm. The worm gear units with two drive journals are available in 9 different ratios. The housing is encapsulated against grease leakage and dust exposure. The worm gearbox set is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm key Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Zinc External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox 1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-DZPR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-DZPR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-DZPR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-DZPR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-DZPR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-DZPR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-DZPR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-DZPR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-DZPR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.

Features Worm gear box with keyway and one drive journal 65:1 - 5:1 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.  Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm key Output: for spindle TR14x2 Nr. 13713.14-V00L1000 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical specifications worm gear box 4,5 Nm - 11 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-S0G0R65 65 : 1 ja 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-S0G0R18 18 : 1 ja 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-S0G0R05 5 : 1 nein 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 * Short-term peak load <1s Axial load on the output side 500 Nm  Application worm gear box 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.   

3 reduction ratios from 5:1 to 65:1 l Housing anodised aluminium l For spindle TR14x2 l Keyway 12mm/4mm l Centre distance 20mm  Ket Motion 2020 worm gearbox unit  Universal and maintenance-free worm gear unit in one size with a centre distance of 20 mm. The worm gears with two drive journals are available in 3 different ratios. The housing is encapsulated against grease leakage and dust exposure. The worm gear set is left-handed. The direction of rotation on the shaft is arbitrary. Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm key Output: for spindle TR14x2 Nr. 13713.14-V00L1000 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox 4,5 Nm - 11 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-D0G0R65 65 : 1 ja 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-D0G0R18 18 : 1 ja 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-D0G0R05 5 : 1 nein 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 * Short-term peak load <1s Axial load on the output side 500 Nm  Application worm gearbox 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.   

9 reduction ratios from 1:1 to 65:1 l material-saving zinc housing l with keyway 12mm/4mm l centre distance 20mm  Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm key Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Zinc External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox 1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-SZPR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-SZPR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-SZPR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-SZPR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-SZPR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-SZPR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-SZPR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-SZPR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-SZPR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.

9 reduction ratios from 1:1 to 65:1 l material-saving zinc housing l with turntable l centre distance 20mm Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 44mm turntable Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Zinc External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox  1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-DZDR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-DZDR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-DZDR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-DZDR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-DZDR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-DZDR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-DZDR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-DZDR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-DZDR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces. Areas of application back to the overview

9 reduction ratios from 1:1 to 65:1 l material-saving zinc housing l with turntable l centre distance 20mm Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 44mm turntable Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Zinc External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox 1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-SZDR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-SZDR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-SZDR30 30 : 1 yes 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-SZDR23 23 : 1 yes 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-SZDR18 18 : 1 yes 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-SZDR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-SZDR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-SZDR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-SZDR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces. Areas of application back to the overview

9 reduction ratios from 1:1 to 65:1 l anodised aluminium housing l with splined shaft profile DIN5463-6X16x20 l shaft distance 20mm  Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Input and Output: Drive: 12mm / 4mm keyOutput: splined hub profile DIN 5463 6x16x20 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical specifications worm gearbox 1,5 Nm - 15 Nm Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-K0PR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-K0PR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-K0PR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-K0PR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-S0PR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-K0PR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-K0PR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-K0PR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-K0PR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1s Axial load on the output side 500 Nm Application worm gear 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gears can be used for high power transmissions in tight spaces.

9 reduction ratios from 1:1 to 65:1 l anodised aluminium housing l with splined shaft profile DIN5463-6X16x20 l shaft distance 20mm  Worm gearbox Ket Motion 2020 Universally applicable and maintenance-free worm gearbox with an axial distance of 20 mm and seven different transmission ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm wheel assembly is left-handed. The direction of rotation on the shaft is arbitrary.   Lifetime of 1000 hours with: full load and  input speed of 500 rpm and  duty cycle 20% with 5 min and ambient temperature 20 C° On/Off duration: 20 % at 5Min ( 1 min ON, 4 min OFF) Permitted operating temperature: -20 to 60 C° Axial distance: 20 mm Drive shaft diameter 12mm / 4mm feather key groove Splined hub profile output DIN5463 6x16x20 Permitted forces output side (axial and radial): 500 N Backlash on the drive shaft: 1° +/- 0,5° Type: case hardened worm and cog wheelmaintenance-free grease lubrication Housing: Aluminium, anodized External dimension: 60 x 60 x 35 mm Technical information worm gearbox 65:1 - 1:1 Item number ratio i Self-locking static Output- speed range n in rpm Max. output torque M in Nm Peak torque output* Max. drive torque M in Nm Input side Degree of efficiency in % Radial force 1) FR in N Axial force 2) FA in N 2020.00-D0KR65 65 : 1 yes 100/500/1000 4,5/3,8/3,0 15 Nm 0,2/0,2/0,2 500 500 29 2020.00-D0KR40 40 : 1 yes 100/500/1000 5,5/4,8/4,0 20 Nm 0,4/0,3/0,3 400 400 39 2020.00-D0KR30 30 : 1 no 100/500/1000 8,5/7,0/5,5 30 Nm 0,6/0,5/0,4 350 350 45 2020.00-D0KR23 23 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 0,9/0,7/0,5 250 250 50 2020.00-D0KR18 18 : 1 no 100/500/1000 11,0/9,0/7,0 60 Nm 1,1/0,9/0,7 250 250 55 2020.00-D0KR15 15 : 1 no 100/500/1000 12,0/10,0/8,0 70 Nm 1,5/1,3/1,0 250 250 52 2020.00-D0KR13 13 : 1 no 100/500/1000 15,0/13,0/11,0 75 Nm 2,1/1,8/1,5 200 200 56 2020.00-D0KR05 5 : 1 no 100/500/1000 10,0/8,0/6,0 50 Nm 2,9/2,3/1,7 200 200 70 2020.00-D0KR01 1 : 1 no 100/500/1000 1,5/1,0/0,65 15 Nm 2,1/1,4/0,9 250 250 73 * Short-term peak load <1sAxial load on the output side 500 Nm Application worm gearbox 65: 1 - 1: 1 Worm wheels transmit the motive force at right angles via a sliding effect. The gearboxes are characterized by their low-noise operation and robustness. The worm gearbox can be used for high power transmissions in tight spaces.

Linear drive Ket Motion 2020 Z The universally applicable linear drives have the function of converting rotating movements into axial ones. They are used wherever vertical or horizontal transport, lifting, pushing or control is required. As an electromechanical variant, these special gears often replace hydraulics and pneumatics. Thanks to a toothed rack that can be freely scaled in length, the stroke can be freely selected to suit the application.     Duty cycle: 20 % bei 5 Min ( 1 min ON, 4 min OFF) Application temperature: -20 to 60 C° Centre distance 20 mm Drive  Wedge grain profile DIN5463-6X16X20 Feed per revolution 87 mm Backlash < 0,5 mm Max speed 100 mm/s Housing: Housing made of anodised aluminium Special features Lubrication and maintenance free Technical specifications linear gearbox 2020 Z Order no. Hub Feed per revolution in mm Self-locking Drive torque max. MA in Nm Axial force output side max. FA in N Axial force output side max. FA peak**in N 2020.00-ZZKH0150 150 87 no 2,3 100 1300 2020.00-ZZKH0250 250 87 no 2,3 100 1300 2020.00-ZZKH0500 500 87 no 2,3 100 1300 *Short-term peak load <1s Application linear drive Ket Motion 2020 Z Several gearboxes can be synchronised by means of connecting flanges, connecting shafts and electronic control.  The parts required for this can be found in our extensive range of accessories. Back to the overview

Linear drive Ket Motion 2020 Z The universally applicable linear drives have the function of converting rotating movements into axial ones. They are used wherever vertical or horizontal transport, lifting, pushing or control is required. As an electromechanical variant, these special gears often replace hydraulics and pneumatics. Thanks to a toothed rack that can be freely scaled in length, the stroke can be freely selected to suit the application.     Duty cycle: 20 % bei 5 Min ( 1 min ON, 4 min OFF) Application temperature: -20 bis 60 C° Centre distance 20 mm Drive  Wedge grain profile DIN5463-6X16X20 Feed per revolution 87 mm Backlash < 0,5 mm Max speed 100 mm/s Housing: Housing made of anodised aluminium Special features Lubrication and maintenance free Technical specifications linear gearbox 2020 Z Order no. Hub Feed per revolution in mm Self-locking Drive torque max. MA in Nm Axial force output side max. FA in N Axial force output side max. FA peak**in N 2020.00-Z0KH0150 150 87 no 2,3 100 1300 2020.00-Z0KH0250 250 87 no 2,3 100 1300 2020.00-Z0KH0500 500 87 no 2,3 100 1300 *Short-term peak load <1s Application linear drive Ket Motion 2020 Z Several gearboxes can be synchronised by means of connecting flanges, connecting shafts and electronic control.  The parts required for this can be found in our extensive range of accessories. Back to the overview

Max. Load Tensile load 8 kN l Max. Compressive load 5kN l Transmission ratio 1:2 l Drive torque 2.5 Nm l Drive hexagon SW6 l Zinc die castingFeatures bevel gearbox 3057  l 2,5 Nm  l 1:2 The bevel gear unit 2.5 Nm 1:2 is also considered a reversing gear unit. It is suitable for deflecting a rotary motion at a 90° angle. This angular gear is ideal for adjusting sunshades. The special toothing ensures smooth running of the gearbox.  At the same time, the bevel gearbox is characterized by its hardened steel bevel gears and its zinc die-cast housing. The bevel gearbox is maintenance-free and designed for manual operation. Technical data bevel gearbox 2,5 Nm 1:2 Translation: 1:2 Drive: 6kt SW6 Output: 6kt SW9 Number of gears: 2 Housing material: Zinkdruckguss Max. Drive torque: 2,5 Nm Max. Tensile load static short-time* 8.000 N Max. Compressive load static short-time* 5.000 N Attention: Spindle not included in the scope of delivery. Depending on the spindle used, the self-locking of the system must be checked Back to the overview 

Inside hexagon 7mm l Aluminium profile tube l Axle length 200mm or 245mm l Glass-fibre reinforced plastic l Projection 110mmProperties hand crank 5187 inside 6kt SW7 Our hand cranks in the design inside 6kt SW7 are available in different dimensions regarding throat depth. The hand cranks are characterized by their simple and at the same time modern design and are suitable for an easy and exact adjustment. In addition, our hand cranks are suitable for the profile bars, bevel gears and worm gears offered in our store.  Technical specifications hand crank inside 6kt SW7 Item number 5187.00-V02A200 5187.00-V02A245 Execution inside hexagon SW7 inside hexagon SW7 Axis length 200mm 245mm Outreach 110mm 110mm Material crank handle glass fiber reinforced plastic glass fiber reinforced plastic Material Aluminum profile tube Aluminum profile tube Color crank body & handle: black black back to the overview

Mounting flange for Ket-Motion 2020 gearbox l Aluminium l incl. mounting material l 45° gridTo ensure secure mounting of our Ket-Motion 2020 worm gear units, we offer you a mounting flange with screws and holes in a 45° grid. This aluminium mounting flange is used for the individual and simple fixing of our 2020 worm gear units: The flange is supplied with fixing material. Back to the overview

Profile end caps made of aluminium AIMgSiO,5 as an ideal complement to our notched wave profile incl. fixing material

Reduction ratios 65:1 l Housing anodised aluminium l With turntable l Axle spacing 20mm l Maintenance-free grease lubrication l Backlash-free Backlash-free worm gearbox Ket-Motion with rotary plate and one drive journal 65:1 Centre distance 20mm 1 Nm Universal and maintenance-free worm gearbox in one size with a centre distance of 20 mm. The housing is encapsulated against grease leakage and dust exposure. The worm gear set is left-handed. The direction of rotation on the shaft is arbitrary.Lifetime of 1,000 hours at: full load and Input speed of 100 rpm and  Duty cycle 10% at 5 min and Ambient temperature 20 C° Axial load on drive side max. 600N Axial load on output side max. 1500N   Duty cycle: 10 % to 5 Min ( 30 sec ON, 4,5 min OFF) Operating temperature: -20 to 60 C° Output torque max 1Nm Self-locking yes Centre distance 20 mm Drive and downforce: Drive : 12mm / 4mm keyOutput : Rotary plate 44mm Perm. forces output side(axial and radial) 500 N Reverse play <0,05° to 0,1Nm <0,5° to 1 Nm Execution: Maintenance-free Grease lubricationfree of play Housing: Housing made of anodised aluminium External dimensions: 60 x 60 x 35 mm     Further translations on request. Application worm gearbox 65:1 Worm gearboxes transmit the motive force at right angles via a sliding effect. The gearboxes are characterised by their low-noise operation and robustness. The worm gearbox can be used for high power transmission in confined spaces.      

Reduction ratios 65:1 l Housing anodised aluminium l With turntable l Axle spacing 20mm l Maintenance-free grease lubrication l Backlash-free Backlash-free worm gearbox Ket-Motion with rotary plate and two drive journal 65:1 Centre distance 20mm 1 Nm Universal and maintenance-free worm gearbox in one size with a centre distance of 20 mm. The housing is encapsulated against grease leakage and dust exposure. The worm gear set is left-handed. The direction of rotation on the shaft is arbitrary.Lifetime of 1,000 hours at: full load and Input speed of 100 rpm and  Duty cycle 10% at 5 min and Ambient temperature 20 C° Axial load on drive side max. 600N Axial load on output side max. 1500N Duty cycle: 10 % to 5 Min ( 30 sec ON, 4,5 min OFF) Operating temperature: -20 to 60 C° Output torque max 1Nm Self-locking yes Centre distance 20 mm Drive and downforce: Drive : 12mm / 4mm keyOutput : Rotary plate 44mm Perm. forces output side(axial and radial) 500 N Reverse play <0,05° to 0,1Nm <0,5° to 1 Nm Execution: Maintenance-free Grease lubricationfree of play Housing: Housing made of anodised aluminium External dimensions: 60 x 60 x 35 mm     Further translations on request. Application worm gearbox 65:1 Worm gearsbox transmit the motive force at right angles via a sliding effect. The gearboxes are characterised by their low-noise operation and robustness. The worm gearboxes can be used for high power transmission in confined spaces.      

Bevel gearbox for the deflection of a rotary movement at an angle of 90°. Particularly suitable for the adjustment of large parasols. The special bevel gear toothing ensures smooth running of the gearbox. Special featuresMaintenance-freeCase hardened steel bevel wheelsHousing made of zinc die-casingDesigned for manual operationTechnical notesDepending of the spindle pitch the self-locking of the system must be checkedRatio:1:1,5Input:hex 9mmOutput:hex 9mmNumber of bevel wheels2Housing:Zinc die-castingMax. torque:4 NmDimensions:50 x 50 x 84On/Off duration:20% (at 5 Min.)Allowable operating temperature:0 to 40°C

There are different application areas for this bevel gear drive, e.g. in model making, in special machine construction or hobby area – whenever movement comes into play.Speed range till:50 rpmmax. torque:5 NmRatio:1 : 1,5Input:hex 9mm Output:Shaft Ø 12,2mmLength of output: 20mmDimension:60 x 90 x 45 mmWeight:767 gSelflocking:noOn/Off duration:20% (at 5 Min.)Allowable operating temperature:0°C to 40°CHousing:Zinc die-castingSpecial featuresSteel bevel gears, zinc-plated

Features bevel gearbox 10 Nm 1:1 Our bevel gearboxes with a maximum torque of 10 Nm are used to deflect a rotary motion. The special toothing of the installed gears ensures smooth running of the gearbox. The bevel gearbox is also maintenance-free and consists of hardened steel bevel gears with ball bearings and a die-cast zinc housing. The bevel gearboxes in this product group differ in terms of input/output and the number of bevel gears:   3870.00-1001    3871.00-1001 3870.00-1002    3871.00-1003    In / Output  hex 6mm hex 6mm hex 6mm hex 6mm number of bevel gears 2 3 2 3 suitable mounting Befestigungsflansch für Kegelradgetriebe Special features Maintenance-free Hardened, bearing seated steel gear cogs Housing made of zinc die-casting Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C Speed range till: 150 rpm Max. drive torque: 10 Nm Ratio: 1 : 1 Dimensions: 50 x 50 x 50mm Self-locking: no On/Off duration: 20% (at 5Min.) Allowable operating temperature: -20°C to 40°C Housing: zinc die-casting Special features: hardened, bearing seated steel gear cogs Application bevel gearbox 10 Nm 1:1 The bevel gearbox 10 Nm 1:1 is suitable as a transfer gearbox or attachment gearbox for electric motors. These are used, among other things, for blinds and actuators in special machine construction.le as a transfer gearbox or attachment gearbox for electric motors. These are used, among other things, for blinds and actuators in special machine construction.

Properties bevel gear 10 Nm 1:1 The bevel gearbox with a max. torque of 10 Nm and a gear ratio of 1:1 is also known as a reversing gearbox. The gearbox has a special toothing, which is responsible for the smooth running of the gearbox. At the same time, the bevel gearbox is characterized by its hardened steel bevel gears with ball bearings and its zinc die-cast housing. The gearbox is maintenance-free. The gearboxes are selectable in the characteristics of input, output and length of the input. 3872.00-0062    3872.00-0045 3872.00-0039    3872.00-0028    Output 2x Spindle TR 12x3 RH  2x Spindle TR 12x3 RH 2x Spindle TR 12x3 RH  2x Wave Ø 12mm  Drive Continuous shaft Ø 12mm  Continuous shaft Ø 12mm   inside 6kt SW9 Continuous shaft Ø 12mm Output length    200mm 350mm 200mm 13,2mm Special features bevel gear box 10 Nm 1:1   Maintenance-free Hardened, bearing seated steel gear cogs Housing made of zinc die-casting Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C Technical data bevel gear box 10 Nm 1:1 Speed range till: 150 rpm  Max. drive torque: 10 Nm Ratio: 1 : 1 Dimensions: 50 x 50 x 50mm Self-locking: no On/Off duration: 20% (at 5Min.) Allowable operating temperature: -20°C - 40°C Housing: zinc die-casting Special features: hardened, bearing seated steel gear cogs Application bevel gearbox 10 Nm 1:1 The bevel gearbox is ideal for use as a transfer gearbox or as an attachment gearbox for electric motors. The application is mostly for blinds and actuators in special machine construction.

Transmission ratio 1:1 l Drive torque 10 Nm l Housing made of zinc die-cast l 5 variants 2 ,3 or 4 bevel gearsFeatures bevel gearbox 10 Nm 1:1 with blind hole Our bevel gearboxes with blind hole are maintenance-free and have special gearing, which ensures smooth running of the gearbox. The gearboxes are suitable for the deflection of a rotary motion and are therefore also known as deflection gearboxes. The bevel gears of the gearbox are hardened and have ball bearings. The housing is made of zinc die casting.    In addition to a selection in the input and output, it is possible to choose between a different number of bevel gears.     3871.00-1002   3872.00-1001 3870.00-1000   3869.00-1000    3872.00-1000    On / Offset hex 6mm hex 6mm hex 7mm hex 7mm hex 7mm Number of bevel gears     3 4 2 3 4 Suitable mounting Mounting flange for bevel gearbox Special features Maintenance-free Hardened, bearing seated steel gear cogs Housing made of zinc die-casting Lifetime 20,000 load changes: at 10 Nm, 110 rpm, with the duty cycle 30 s ON 240 s OFF and at + 25 °C Technical data bevel gearbox 10 Nm 1:1 with blind hole Speed range till: 150 U/min Max. drive torque: 10 Nm Ratio: 1 : 1 Dimensions: 50 x 50 x 50mm Self-locking: no On/Off duration: 20% (at 5Min.) Allowable operating temperature: -20°C to 40°C Housing: zinc die-casting Special features: hardened, bearing seated steel gear cogs Application bevel gearbox 10 Nm 1:1 with blind hole The bevel gearbox is suitable for use in noise-sensitive areas due to its quiet running. It is ideally used as a transfer gearbox or as an attachment gearbox for electric motors and can be found in its application in blinds and actuators in special machine construction.

Features bevel gearbox 3 Nm 1:1 The bevel gearbox has a continuous 6kt axis four input and output. The variants of the gearbox vary in their deflection angles.  Technical data bevel gear box unit 3 Nm 1:1 Speed range till: 150 rpm Max. drive torque: 3 Nm Ratio: 1: 1 Input/Output: hex 6mm Dimensions See drawing Allowable operating temperature: 0 to 40°C Housing: reinforced glass-fiber Special features: through 6kt axiscase hardened steel gear wheels Application bevel gear 3 Nm 1:1 The bevel gearbox is suitable as a versatile drive solution for use with height-adjustable tables, sunshades, adjustable windows and for any linear adjustments in the industrial sector.    

Deflection 120° or 135° l Transmission ratio 1.3:1 l Drive torque 3 Nm l Designed for manual operation Properties bevel gearbox 3 Nm 1:1 A bevel gearbox family for use as a deflection gear in up to two directions. Deflection of rotational movement possible at angles of 120° or 135°. Simple screw mounting on the adaptor facilitates uncomplicated assembly. Special features Maintenance-free Case hardened steel bevel wheels Housing made of reinforced glass-fiber at an angle of 120° or 135° Designed for the manual operation  Technical data bevel gearbox 3 Nm 1:1 Max. drive torque: 3 Nm Ratio: 1 : 1 90° downward ratio: 1,33 : 1 Speed range till: 150 rpm Input/Output: hex 6mm Dimensions: 35 x 45 x 45 mm Self-locking: no On/Off duration: 20% (at 5Min.) Allowable operating temperature: 0 to 40°C Housing: reinforced glass-fiber Special features: case hardened steel gear wheels Application bevel gearbox 3 Nm 1:1 The bevel gearboxes are also called reversing gearboxes. Therefore, they are suitable for use wherever movements and forces have to be transmitted at an angle. Exemplary application areas would be in model making, special machine construction or hobby areas.